¿ªÔÆÌåÓý

ctrl + shift + ? for shortcuts
© 2025 Groups.io
  1. Nodered-Hamradio
  2. Messages
Single Messages Topics Expanded Polls

Re: Looking for comments from new members using Node Red

 

¿ªÔÆÌåÓý

Just be careful.

?

If you have Flex data going to the KAT500 full time then you will not be able to manually control the tuner. The Manual commands would get overridden by the info coming from the Flex.

?

However, you can bring the Flex frequency and band info into Node Red and have a gate set up for Auto or manual mode. In Auto mode format the Flex data and pass to the KAT500. When in Manual open the gate so that the Flex does not stream info to the tuner then have manual controls set up.

?

Just a thought¡­.

?

73

Dave wo2x

?

?

From: [email protected] <[email protected]> On Behalf Of Kyle K
Sent: Thursday, January 21, 2021 3:06 PM
To: [email protected]
Subject: Re: [nodered-hamradio] Looking for comments from new members using Node Red

?

On Thu, Jan 21, 2021 at 10:59 AM, Corey Badgley KC7MRQ wrote:

I am currently testing a method to split the serial data from the Flex - KAT500 usb/serial cable so I can use Node-Red to control the tuner with both the Flex and Pi.?

I'd love to see this solution, as I'd like to do the same thing!!!!!

Kyle

Join [email protected] to automatically receive all group messages.