¿ªÔÆÌåÓý

ctrl + shift + ? for shortcuts
© 2025 Groups.io
  1. Nodered-Hamradio
  2. Messages
Single Messages Topics Expanded Polls

Re: Help with Modified MKCM SPE Amp.json

 

Scott

The IP address that would give the message you show should be the IP address of your raspberry Pi.? If Node-Red and FRstack are on the same Raspberry Pi, use the Loopback IP and port :5025


Screen Shot 2021-01-20 at 8.30.06 AM.png

This sets the communications between FRStack and Node-Red

For the SPE amp connection, you need to configure the COM port in the FRStack configuration file, ?located at "/usr/local/frstack/appsettings.json.

Here is a link to the MKCM instructions.? The configuration file is show about 3/4 ways down:



Here is a screenshot:

Screen Shot 2021-01-20 at 8.33.20 AM.png

E-mail me if you need more help.? We can Team View?or Zoom.

Alan
WA9WUD



On Wed, Jan 20, 2021 at 8:02 AM Scott - W5NJK via <w5njk=[email protected]> wrote:

So I've downloaded this node and it displays, but I get an ECONNECREFUSED error on the GetSPEINFO function.? What am I missing in the setup?? The IP address is set to the radio ().

My Node-red is running on a Pi, and it feels like I need a port setting opened up but I'm pretty sure I don't have firewall installed (yet)

Any ideas?
Join [email protected] to automatically receive all group messages.