开云体育

What are you referring to by "the documentation link above"...? I'm not seeing any link there. -- Member of the toughest, meanest, deadliest, most unrelenting -- and ablest -- form of life in this s

Thank you for these videos.

For those of you who didn’t like my first two attempts at this video.. I think I’ve done a much better job on this one of explaining why I take my readings at 90 degrees phase angle on the smith

Version 3 https://youtu.be/iJ1qKE5O0bY -- VE6WGM

Sorry, in color command need set full RGB index, for white color command color 19 0xFFFFFF

On H4 this can be from default color on H4 for LC/Match (all colors can be changed by color command) You need: Run in console command for change LC match text color: and not fogot save CONFIG->SAVE or

A video I did up last summer on how to use the nanoVNA to measure the resonant frequency of crystals. The intended audience is those who are not wanting a complete and exhaustive characterization of

Well, I'm an electrical engineer and I found it very useful. Zack W9SZ

Hi !! I find this that have the option to buy in EU.

Hi, Anyone have the trap LC values for a 6BTV antenna? I am building a model of it in 4NEC2. -- 73, and thanks, Dave (NK7Z) https://www.nk7z.net ARRL Volunteer Examiner ARRL Technical Specialist, RFI

The boards are very similar. I have not seen any documentation online for the six-connector board. What is different is that two additional sections have been added so that you can build attenuators,

Raoul, If you are interested in more info on measuring crystals with your NanoVNA I suggest the video by W2AEW on this subject. He carefully explains the terms and definitions and compares various

I received this same six-connector "NanoVNA Testboard Kit" with my VNA. Where can I find documentation for this kit? The documentation link in this thread is for a different two-connector test board.

Great video, Gregg. Thanks very much. 73 de Raoul, CE3RY

This just became a bit more interesting. It seems that there is a discrepancy in how SimSmith calculates the angle depending on the circuit block used. For an S block it shows the same curve as in

I guess that depends on what you consider as minimal and if you are modeling an ideal resistor or a more realistic one. For example: on the first image is the plot of voltage angle at the load (port 2

I would presume type 43 material is used? For 160 and 80-meters your setup is quite reasonable. If you scanned to 30 MHz, likely a clean-up would be required, but you are aware of that. Good work!

https://youtu.be/_vvCBarRaPY Here’s what I did to measure the common mode attenuation of a current balun that I recently constructed. -- VE6WGM

Dragan, Thank you for clarifying what you did on your tests. I took a look at the .s2p file that you posted and see that you get the same large S21 phase shift that I got in my tests. I posted my plot

Hi all! I don't know if I have problem, a faulty display or a firmware bug. I'm testing the function L/C Match. I enable the function by clicking "MARKER/SMITH VALUE/L/C MATCH" in the menu system, but