开云体育

Gin&pez Thanks for the reply.no need for any action from you side. Garry already help me to understand better -- NanoVNA Wiki: /g/nanovna-users/wiki/home NanoVNA Files:

Kurt, Thanks for supporting BNC connectors. I do lots of portable operation on HF and 6 meters and an constantly rearranging equipment so I have standardized on BNC connectors and purchased your

Neal Pollack wrote: 1. ...it appears to be a NanoVNA-H hardware version but without the plastic case. It is black, USB-C, with RF shields and LiPo battery containing charge/protection circuits on the

Yours sounds like the one I have and I use edy555 firmware.

NanoVNA-Saver has no limitation on the number of saved calibrations. They are saved as files. -- Rune / 5Q5R

Is there any limit to the number of possible calibration settings in NanoVNA-SAVER?

Hello: I am a new user, and just received one of the recent, but not "-H" versions of the NanoVNA. It seems to have a build date of second half 2019. No case, but shielded, and the sides are open,

I should correct my post above, since upon reading more on the wiki, it appears to be a NanoVNA-H hardware version but without the plastic case. It is black, USB-C, with RF shields and LiPo battery

@ Erik, PD0EK 10 December 2019 - /g/nanovna-users/message/8105 Dear Erik, Thank you very much indeed for your continuing interest in our work ! However, since we are not sure at all

Hi All I have been asked about how to convert calibration kit files for the VNWA calibration kit to the format used by NanoVNA-Saver so I have made a couple of documents Where the first one is how the

Hello: I am a new user, and just received one of the recent, but not "-H" versions of the NanoVNA. It seems to have a build date of second half 2019. No case, but shielded, and the sides are open,

Unfortunately, there is no more room in the firmware for more storage locations.? Sent from Rogers Yahoo Mail on Android On Sat, 14 Dec 2019 at 1:48 am, George Kokolakis, SV3QUP<kokolakis@...>

Hugen removed c4 so he could fit in the larger fonts.? Sent from Rogers Yahoo Mail on Android On Sat, 14 Dec 2019 at 1:33 am, Luigi Mantuano<l49mantuano@...> wrote: Hello again, earlier today I

The Octave serial interface library is different. Rest should work. -- NanoVNA Wiki: /g/nanovna-users/wiki/home NanoVNA Files: /g/nanovna-users/files Erik, PD0EK

On Mon, Oct 28, 2019 at 06:52 AM, W1RS wrote: Has anybody tried this with Octave? (Matlab open source "clone") ================================================================= Paul Fredette, K1YBE,

Not enough memory -- NanoVNA Wiki: /g/nanovna-users/wiki/home NanoVNA Files: /g/nanovna-users/files Erik, PD0EK

Ah, grazie Maurizio! I suspected it had to be something I missed.. Saluti da sunny Melbourne, Australia.. lm

Hi Luigi , from message #7400 about the firmware version 4.0.3 AA QRP and Oristo wrote: "it has larger font, so it cannot show full frequency and measured value result and cut-off part of the value"

Would it be possilbe to have more store positions for settings? 9 would be great for HF bands. Does anyone now if the limitation is on the hardware or just on the firmwares available? George, SV3QUP

Hello again, earlier today I finally loaded hugen's v0.4.0-3, AA-4 traces ( NanoVNA-H_20191125_AA.dfu) FW on my nV... all looked good but when I went to set up and store the 5th calibrated range in