开云体育

What is the resolution of the 4” display you intend using? Is it less than the the NanoVNA-F? If so, I would not buy one. The NanoVNA-F comes with a 5600 mA hr battery, which I believe will run the

I would like to see the archives, files and Wiki open, so that it may encourage others to join the group after seeing the available material. Why block information which members have freely

Thanks Hugen's correction. And special thanks to Oristo8 and Larry for maintaining the wiki pages for us to quickly look for useful information. Regarding the display size, NanoVNA-F's 4.3" IPS LCD is

Ditto. Would have been a 2nd one for hacking in the workshop, didn't look right and might not work but for spares was almost too cheap to ignore. Anyway ebay/paypal buyer protection works so it isn't

Correct, STM32F303CCT6 has 256KB FLASH. hugen

Thanks, that sound like one I should try. I will order one and do a review on my show. Do you mind if I mentioned that you help me find one? Tom

Interesting and thanks for the info. Tom

Thanks for the info. This one does not appear to come with a case. There are so many similar ones that have bad reviews. This particular has no reviews. Thanks for your time. Tom

On Thu, Nov 21, 2019 at 04:56 AM, Dr. David Kirkby, Kirkby Microwave Ltd wrote: Thnx, dear 9 lined signature sales man. > > On Mon, 18 Nov 2019 at 13:58, RFy <gpdxdveil@...> wrote: > > > 450mAh

Hi all, What is your opinion of this one? https://www.amazon.com/gp/product/B07YYMDLPR/ref=ppx_yo_dt_b_asin_title_o04_s00?ie=UTF8&psc=1 thanks & 73's Greg W4GAP

Hello, This email message is a notification to let you know that the following files have been updated in the Files area of the [email protected] group. *

Those small differences (missing 'CHO' and lower left number) were on "worse" clones without shielding.

https://oristopo.github.io/nVhelp/html/Wnano.htm

Thanks for the update, Ken! Hopefully, you are able to make the jog switch more responsive by using interrupts instead of polling. As for the power circuits, it is nice to be able to use a single 3.7v

Tom, The unit at the link you provided looks identical to the Aursinc unit I bought a few weeks ago (also from Amazon). The two small differences I can see are: 1. On mine, the upper SMA connector has

Hi Doug, I'm glad you tried it and are happy with the little program. I reinstalled the operating system in September, but I only see the 13 drivers I've used on this computer since it was installed.

LED stops flashing and USB current meter shows zero current being drawn (nanovna being switched off). In line USB tester. Ten for quid from China variety / Ebay ;-) 2.1 amp USB cell phone charger, as

You can also go to Then at the upper left corner of the window, click "View" and select "Show hidden devices". Once you can see them, you can right-click on one you don't want and select "Delete" to

Being able to completely shut off LCD backlight (and refresh, but that is only firmware) if/when driving from BLE to save power.