开云体育

35 : Straight In The Heart of The Matter @Gary O'Neil - 6 October 2019: /g/nanovna-users/message/4169 Hello Gary, Well, to put it simply : in our small world, your last message sounds

Pretty sure nanovnasharp does this. Tried decompiling the thing but im no coder so all i found was this private void save0Button_Click(object sender, EventArgs e) { this.controller.SendDataToCom("save

All working well. I merged the edy555 additions with my modified scan command and made the build firmware available in the firmware section. Build 0.2.2_1

Hello, This email message is a notification to let you know that the following files have been uploaded to the Files area of the [email protected] group. * /Firmware/NanoVNA firmware build by

ST-LINK uses just 2 wires: SWDIO and SWCLK. Also you're needs to connect VDD to 3.3V and GND to GND. You can also connect 5-th wire RST to RST, but it is required only when SWD pins are reprogrammed

https://www.eevblog.com/forum/metrology/determining-solt-kit-errors-via-basis-pursuit/

Here's what can happen: Someone has an eBay account and they decide they want to make some quick money from it. Or they hijack an account for the same reason. So they'll sell something at a "price

I use the stylus from Galaxy Note phone...never did use it with the phone.

yin, gin & pez@arg Thank you for your gracious response and compliance to my request. In my efforts to understand your project, I think I may have had a bit of an epiphany that may start me toward

Hi,I have just tried to run your latest build for the Android app and find it is still trying to access the internet at startup to this address:? ?172.217.1.10:443 This is owned by Google. Does your

I think on the CAL line, reset should be the very first item opposite CAL and everything else is below. Why? You need to do a reset before you do the rest of the cal steps.? Leave 'calibration' at

Hip Hip Hurra A bright invention Kurt -----Oprindelig meddelelse----- Fra: [email protected] <[email protected]> P? vegne af Torbj?rn Toreson Sendt: 5. oktober 2019 14:42 Til:

Hello, This email message is a notification to let you know that the following files have been uploaded to the Files area of the [email protected] group. *Uploaded By:* Keystonebart

Hi Oristo Yes if you load is also perfect 50ohm but such a load cost many $ ? although the load supplied with the NanoVNA is pretty fine and you correctly mentioned "observe no appreciable

What's the link?

Thanks for the info on the T check.

Annotated menu map for updated firmware, take 1: https://oristopo.github.io/nVhelp/html/Hnano.htm * broken branch FORMAT->LOGMAG requires CSS fix, may take awhile.. * links and help text not yet

On Sat, Oct 5, 2019 at 11:25 AM, Bo, OZ2M wrote: ….. When it comes to the NanoVNA numbers may be somewhat confusing. I for one do > have some difficulties sorting one H/W from the other …..

I just did this on Windows 10. First, get the edy555 0.2.2 file: https://github.com/ttrftech/NanoVNA from there, click the 'releases' icon near the top the latest release is 0.2.2 click

Indeed. Two separate signals. For IQ mixing the LO inputs would have to be 90 degrees out of phase and the input must be the same. Both are not the case. The nanoVna needs to measure two independent