开云体育

Kurt, it might be worth creating a fake Touchstone file with an exponentially decaying amplitude, “modulated” with a sine wave - I *think* that would produce the right result. If you exaggerated

Hi Erik Thank you for the link in html I tried to change my response to html but is failed Here is another handy document of general interest http://www.hamcom.dk/VNWA/Some basic knowledge about a

Hi Oristo Thank you for your lingual suggestions I have printed your input for picking up any more suggestions. Kind regards Kurt -----Oprindelig meddelelse----- Fra: [email protected]

Hi Ned would i be able to try your software please tas758 at hotmail.com

Currently, and as one of the owners, that is my take on things. I myself have also felt as if I am drinking from a fire hose (5") at times. Splitting the group would require that members subscribe to

Me, for one; * not much space next to PC keyboard http://ormpoa.altervista.org/RFspace.JPG * hands are usually full when going to work elsewhere, making pocket-size VERY handy. * with more secure

Thanks Rune, it's working well now. The only change I would make is to make the traces on the graphs a little wider. Thanks again, Cecil at w5dxp.com

Hi Neb. PLease send me a copy of the software to palolq(at)ymail.com 73! Palo.

Hi neb, TDR is work well.

Don't forget there are account settings where you decide whether to receive an email for every individual post, or a single digest each day, or no emails etc etc. I receive a daily digest, but I

23 : On the Uncertainties of the "Standards" - Part I @ Jeff Anderson : /g/nanovna-users/message/3294 Hello, Thank you very much for your most encouraging message ! We much appreciate

the IP5306 (I2C Version) can be programmed to e.g. go to sleep after 8,16,32 and 64 seconds (8sec, 32sec modes has been reported by nanovna users). It can be programmed as well to stay on. One can buy

I am still puzzling thru this. On page 3: "As seen the trace is not flowing the circumference off the Smithchart which must spiral inwards in a progressive way." .. evidently "flowing" should be

It should be selected from topics and easier to organize Gyula HA3HZ :-)

Hi Ron, I'm not strong on how to get Python set up, so I trust others who are able to help to chime in. :-) But, do try the following: - In "setup.py", change "PyQt5==5.11.2" to just read "PyQt5".

FWIW, I see this error, but not consistently, on 64-bit Windows 8.1 while running trivial tests of pyqt5 As a Python newbie, 3 possibilities occur to me: 1) I read that some versions of pyqt5 have

Great work Erik - very impressive what can be done at home.

Hi Tom, the 2m band limit defaults are set correctly for Europe. The bands are all manageable ("Manage bands" under Display setup) so you can change any limits that don't fit your particular location.

Hi Jeff, since 0.0.10 NanoVNA-Saver supports reading MA format as well, using Hz/kHz/MHz/GHz. :-) I'll look at DB format as well, which would be required for Elsie. RFSim seems to use a very minimal

I wrote Jim, W4EME, about implementing S-file data in Elsie. It is there already he told me. However, I get this error when trying to load the file: 2019-09-30 07:53:56,084 - NanoVNASaver.Touchstone -