Hans
Your suggestion would work if you know how long the transmission line is in wavelengths. How can you simply measure the impedance at the shack end and know if the impedance you measured is due to the antenna's impedance or the rotation around constant SWR circle? Another way to look at it is, you measure the Z at the rig end and plot this point on the Smith Chart. Now to find the antenna's Z, you rotate around the chart by the electrical length between the rig end and the antenna (towards the load). Another way to do it is to measure the Z at the rig end and use a program such as TLW (comes with the ARRL Ant Book) to calculate the antennas Z BUT again you need to know the electrical length of the transmission line (or if you know transmission line type and it is in TLW's library of cables, you can enter the physical length). 73, Pete, WB2UAQ
