开云体育

Hi, Mike

Thanks for the advice, and I will take this on board.

I have a general dimensioned drawing of one, and I think when I start looking

at possible design’s, I would ask our members to download this drawing I have found,

and ask them to check it and amend against the ones they hold.

Thankyou for that and defiantly taken on board.

73, Talk soon

Les – M0LPB

Sent from Mail ( ) for Windows 10

*From:* Mike Brown ( mbmail@... )
*Sent:* 19 December 2019 11:36
*To:* [email protected]
*Subject:* Re: [nanovna-users] Cases

FWIW I haven't printed hagster's design but have printed cases for my two

NanoVNAs and one for a friend, based on the design by VK5ZBR. Unfortunately

every one had to be different due to physical differences between the three

VNAs and from VK5ZBR's. This is presumably why there seem to be no

commercial cases for NanoVNAs.

The exact position of the SMA connectors and their spacing, together with

the USB position can be different from clone to clone. There can also be

quite a difference in thickness and screw positions too. Some issues can be

sorted by filing but I found I needed to increase the height of the top

slightly for two of the clones.

73

Mike