Hello Pierre,
thank you for the suggestion! It is indeed on my list ;-) For now, the
NanoVNA-F folks have changed their prompt in order to support the other
software versions available. I am working on a more general approach to
supporting different versions, including the differences between edy555's
latest firmwares and earlier versions.
--
Rune / 5Q5R
toggle quoted message
Show quoted text
On Mon, 7 Oct 2019 at 19:59, Pierre Martel <petem001@...> wrote:
Rune, a little idea to make the software compatible to the new and
old prompt (as some still use older firmware) would be to make a
"check" when first connecting to the device and read the prompt and
use that one in the reste of the software..
But I am sure it was already what you wanted to do. ;-)
Le lun. 7 oct. 2019 ¨¤ 12:55, hwalker <herbwalker2476@...> a ¨¦crit :
[Edited Message Follows]
On Sun, Oct 6, 2019 at 02:26 PM, Rune Broberg wrote regarding NanoVNA-F:
The only discrepancy - which is fatal to the software working - that I
have
seen thus far, is that the developers have changed the prompt line,
which I
use to detect when output from the device has finished. Being able to
detect either prompt might make it work, or there might be other
differences. ¡¡.
--------------------------------------------------------------------------------------------------------------------
Rune,
The NanoVNA-F v0.0.3 2019-10-07 firmware was updated per your "prompt
line" observation. From the developer, to quote:
"I think the most suitable command prompt for NanoVNA products should be
"nanovna> ", not "ch> "(which means ChibiOS).
However, in order to be compatible with the existing PC software, we
temporarily choose to compromise."
The GitHub page now lists supported software as: NanoVNASharp v1.0.3(by
Hugen), nanoVNA_mod_v2(by alex_m), and nanovna-saver(by Rune B. Broberg).
Herb
