You don't need to cut any, fold it and cable tie it then you get a second
chance if you go too far.
If you really want to then you can cut later but 4 years on and my wire
antenna is still folded.
toggle quoted message
Show quoted text
On Mon, 12 Jun 2023, 21:06 Doug, <jdkearney@...> wrote:
I'm not sure how to start a new thread here, but since there are a good
number of followers here, I'll try this.
Starting with a new inverted V for 40 M, I cut each side to about a foot
and a half longer. So now that I can see where my SWR of 1.43:1 plots
out as peaking/bottoming out at 6.800 MHz, how do I determine how much I
should cut away on each side? Should I just cut 6" on each side and
recalculate, judging how much farther I have to cut?
Thanks.
Doug.
On 12/06/2023 15:38, Mike Anderson/KF?AWL via groups.io wrote:
Of all the stupid things.
NONE of the videos showed calibration on the end of the feed. They all
did it right at the side of the vna! I finally happened on a video that did
it at the end of the coax n NOW its acting like it should ? FINALLY
getting a swr i can figure out after chasing how many different ghosts ?
--
*/If you forward this email, please delete the forwarding history which
also includes my email address. When sending emails, please BCC so as to
hide all addresses. Thanks for helping to prevent Scammers and Spammers
from mining addresses and spreading viruses./
73
Doug Kearney, VA3DKA
*
*Ottawa, ON *
--
This email has been checked for viruses by Avast antivirus software.
www.avast.com
