Thanks Tim. This appears to be quite comprehensive. I hadn't been aware that the Cube software was available for Linux, so this might come in handy in the future.
Bob Snyder
toggle quoted message
Show quoted text
On 6/28/22 09:34, Tim Dawson wrote:
Here is the document that I had referred to showing how to update a NanoVNA with the ST Micro Cube programmer.
- Tim
On 06/27/2022 06:36 PM, Tim Dawson wrote:
I honestly don't know where it landed, and had asked if someone could put it on one of the pages so that it could be easily found, but I guess that didn't happen . . . I'll repost when I get back to my computer, and (hopefully) it can be put somewhere more easily findable . . .
On June 27, 2022 5:54:12 PM CDT, Bob Snyder <bob@...> wrote:
On 6/27/22 13:54, Tim Dawson wrote:
I use the ST Micro Cube programmer, and the .bin images from Huygen native on Linux and it works fine. (Search the group - I posted a full "HowTo" procedure a month or so ago).
Tim,
Could you point to this post containing the howto? I don't see anything from you in this group regarding the cube software.
Bob
