Nice job.... But i would bot use pl sockets but n sockets cause with v2 plus4 or saa2n i measure also on 13cm...
Even at 70cm the n socket is better as pl...
Your case is so big it should be easy to add a bigger sized battery... Grin
Greetz
Dg9bfc sigi
Am 09.06.2022 16:54 schrieb Siegfried.Jackstien@...:
toggle quoted message
Show quoted text
Add sma to n adaptors...can or better should be with flange (others with
big nut may work also) ... Screw flange on a sheet metal angled 90 degrees
to form end and base plate...
And then use thicker cables with n connectors like i also use on my saa2n
.... Ok you then need new calibration set with n connectors.. But that all
will be more robust as using those flimsy sma..
If you stay on sma then i recommend to use sma extender (male female
adaptor).... So if worn out you can replace that extender
Both will make it more robust...
Either n sockets....
Or sma extender... So if worn out... Easy to replace
I prefer n socket in most cases... But i have both cause i own an saa2n
and a v2plus4... Both with modded fw from dislord :-)
Dg9bfc sigi
Am 09.06.2022 15:30 schrieb Anne Ranch <anneranch2442@...>:
Excellent idea - combine "rotator plate" ( for stability ) with superglue
and Velcro !
I actually was not looking to? buy those tiny screws to permanently mount
the device onto the plate ...
Vaclav AA7EJ
-=-=-=-=-=-=-=-=-=-=-=-
Groups.io Links: You receive all messages sent to this group.
View/Reply Online (#28383):
/g/nanovna-users/message/28383
Mute This Topic: /mt/91635960/146118
-=-=-
Learn about the NanoVNA in the following forum areas:
Documentation & Update Files: /g/nanovna-users/files
Knowledge-based Wiki: /g/nanovna-users/wiki
-=-=-
Group Owner: [email protected]
Unsubscribe:
/g/nanovna-users/leave/11170209/146118/345100570/xyzzy
[siegfried.jackstien@...]
-=-=-=-=-=-=-=-=-=-=-=-
