There is other good software I use to. " NanoVNA-APP"
Is good software too freeand can you use for different Nano brand.
*Sent:* Monday, November 29, 2021 at 4:43 PM
*From:* "Francesco" <realfran@...>
*To:*
[email protected]*Subject:* Re: [nanovna-users] Nanovna
Is freware you daunload for the NanoVNA, but please read bifore the Manual is very important.
*Sent:* Monday, November 29, 2021 at 4:13 PM
*From:* "Larry Rothman" <nlroth@...>
*To:* "
[email protected]" <
[email protected]>
*Subject:* Re: [nanovna-users] Nanovna
On Monday, November 29, 2021, 11:01:42 a.m. EST, Fred Moore <n40cla@...> wrote:
What application created these images? And how and where can I acquire this?
Fred - N4CLA
On Mon, Nov 29, 2021 at 9:48 AM Francesco <realfran@...> wrote:
Hello, this is my S-A-A v2 clone and work, yours don't work? I think the
different groups support you not the device.
Device support is from the seller.
On this group or other there hare people ready to help other this is the
reason for the support group.
Ask your question about your device and someone came to help you.
There is a lot of good people on the NanoVNA different groups ready to
help not worry.
Best regards.
Francesco.
73/ G7OYO
*Sent:* Monday, November 29, 2021 at 12:46 PM
*From:* "Larry Rothman" <nlroth@...>
*To:* "[email protected]" <[email protected]>
*Subject:* Re: [nanovna-users] Nanovna
Hi Anthony,
This is the support group primarily for the original version of the
NanoVNA, H & H4 devices but members have a mix of the various devices and
experiences.
Also - please search the forum messages - there is a lot of info. I wrote
a how to search doc that is the 1st link in the Wiki. The trick is to start
wide and narrow down the search terms - and don't give up after 2 searches.
20 or so messages back there are 2 links to the SAA support groups.
...Larry
On Monday, November 29, 2021, 06:36:43 a.m. EST, Anthony <
n2ki.ham@...> wrote:
What have I gotten into? (bigger frown).? Anyway, to clear things up for my
own mind,? since I have purchased my unit from R&L, I would presume this
group would be the support group for my unit (SAA2N).? Is that correct?
Thanks!
Regards,
Anthony (N2KI)
On Sun, Nov 28, 2021 at 10:54 PM Walt Weber <waltweber@...> wrote:
Anthony, a few observations:
The wiki in this group makes the following observations that I find
relevant:
Section 1.1.5 for hardware shows that the "nanorfe.com" website is
associated with the nanovna 2-0 , aka OwOComm's S-A-A-2
Section 1.1.6 covers the Nanovna-H4 , and lists it as different hardware
from the SAA2
Also, the nanovna.com website points back to this group for support,
while the nanorfe.com site points back to a different group here on
groups.io, the NanoVNAV2 group.
So I associated the question of "approved vendor" in this group with the
wiki in this group, and the nanovna.com
Different hardware, both using the name "Nanovna" --- hmmm, what could be
confusing about that?? (slight grin)
Francesco