Thanks Roger,
Op di 5 okt. 2021 om 03:07 schreef Roger Need via groups.io <sailtamarack=
[email protected]>:
Rune had a good suggestion where you calibrate slot 0 in the NanoVNA for
the maximum frequency range you would ever need and then leave it that way
and use the other slots for other frequency ranges you might want.
That is indeed good advice. This slot 0 will remove the 'large
errors/compensation' of the NanoVNA and hopefully it is also a reproducible
calibration on the NanoVNA (after say a factory reset of the NanoVNA).
A stable calibration of slot 0 of the NanoVNA is essential, as all the
saved calibrations in the NanoVNA Saver will refer to that NanoVNA
calibration.
I will need to redo my NanoVNA Saver calibrations with that in mind.
All the best,
Victor
