On 9/21/2021 8:39 AM, K8HTB wrote:
One thing I have found is when tightening the pl259 you have to make sure the nubs are well seated in the so239 no air gaps.
Good point.
But, people should keep in mind that PL259 and N style connectors are two different animals. The outer shell of a PL259 is part of the Rf connection, but the outer shell of an N connector is just a mechanical connection. The RF connection of the N connector is internal to the outer shell and it is possible to over-tighten and N connector. Finger snug for an N connector is good.
73, Joe, K1ike
