Sorry, should be Michael, not Mario.
toggle quoted message
Show quoted text
On Tuesday, September 14, 2021, 10:05:48 a.m. EDT, Larry <nlroth@...> wrote:
Mario, - calibration does just thet - it calibrates out (ideally, of course) all the variables and takes into account delayes, parasitic LC, etc so that at the reference plane, you have an 'ideal' match with with to test with.
Also, please only enter your replies only once and delete any duplicates as they clog up the forum with 'noise' so to speak.
Thanks
Larry
On Tuesday, September 14, 2021, 09:43:13 a.m. EDT, N2MS <mstangelo@...> wrote:
Larry,
If you do calibration with the adapter installed and the reference plane is at the adapter would you still have to adjust for the electrical delay?
Mike N2MS
On 09/14/2021 8:25 AM Larry Rothman <nlroth@...> wrote:
?
You can do that (I have) but the best way is to calibrate the unit with the adapters installed to move the reference plane to account for them.
? ? On Tuesday, September 14, 2021, 08:08:19 a.m. EDT, Chris Pohlad-Thomas <chrispohladthomas@...> wrote:?
?
? I assume when everyone is using adapters they adjust the electrical delay to account for these?
?
