I am curious. What is the isolation on these jigs with nothing connected?
The jig by itself and with the open connected.
Thanks,
*Clyde K. Spencer*
On Mon, Sep 6, 2021 at 2:44 PM Roger Need via groups.io <sailtamarack=
[email protected]> wrote:
For measuring larger components below 60 MHz I use a couple of other jigs
which work quite well. The first one is built with off-the-shelf cables
and a BNC to banana jack adapter. I built a version in a box without the
bulky adapter that works slightly better and is easier to use. The cal
loads were built from double-sided scrap PCB, copper foil and a 49.9 ohm
SMD resistor.
Photos attached
Roger
