开云体育

The only thing I want to achieve is to change memory channels that are programmed in the radio. But sometimes, I am in VFO mode for whatever reason and if I want to get back to being able to change my

The radio switches to Memory mode and the designated channel upon a write (MW).? You could set command buttons with memory writes by copying the results from a Memory Read (MR) to a command (button),

Dave, That delay setting is in the PTT settings: 73, -Joe- K0OG

Flrig Built just fine on LMDE 6. No trace of a "sticky" PTT issue running Flrig on it's own.? (I spent a minute clicking the PTT button and no stickyness...) But..?? I have had one occurrence when

There is a Windows Program called "Win4YaesuSuite" and with this program you can control V/M on the 991. Which leads to my assumption that such command must exist.

So, I got the Channel Up/Down working, but I have to place the 991 into Memory mode, by hand. I've looked through the CAT control commands and for the life of me, I cannot find the command to toggle

Wow. Nice research! No one knows why the line setting was removed or why one wants to remove an already working feature. I agree that it should not hurt to bring it back and allow us hams to play

Hello! Meanwhile, I did some research... First I found this: https://www.sstv-handbook.com/download/sstv_11.pdf in which the WEFAX settings are described as any kind of combination between 288/576 and

Flirig-2.0.05.85 notarized for MacOS 15 is here: https://www.dropbox.com/scl/fi/c1s2jodc9579pkxtd9mzy/flrig-2.0.05.85.zip?rlkey=ou7l01o6etkzxr5skhqo39rqj&dl=0? flrig-2.0.05.85.zip dropbox.com

at http://www.w1hkj.com/alpha/flrig/ * flrig-2.0.05.85.tar.gz <http://www.w1hkj.com/alpha/flrig/flrig-2.0.05.85.tar.gz> * flrig-2.0.05.85_LI.dmg

Seems the general radio setup image fell off the list mail.. Hear is a repeat... Hopefully this gets through. 73. Dave G0WBX.

Thank you, I will record is as soon as I can receive it because is quite a difficult station to receive. I will also try using some online sdr receivers... 73 de IW9HGS [email protected]> wrote:

Can you please create a sound file recording of the KYODO NEWS wefax broadcast.? Send it direct to w1hkj@... Thank you. David

Hi Dave (HKJ) Thanks for the quick reply. Will await what you might find re the Fldigi "pre-tone" issue. Re Flrig. This is the PTT setup. The use of CAT for the PTT status GET, also allows Flrig to

I see, but those changes broke the reception of a very interesting radio station (KYODO NEWS). For what I see, this is a bug - something that was working before, now it isn't. :(

See notes within:

Hi. A minor bug found in Fldigi 4.2.06.09 And I think a more critical bug with Flrig 2.0.05.75 Both built from source on Linux LMDE 6* in the last few days. (* Based on Debian 12.1 bookworm, a recent

Spoke too soon! The AFC button has been greyed out (in all modes) but from the behaviour of things, AFC is still active!. I tried a restart of Fldigi, but it is still disabled. Just looked again,

Tried flashing 12 Bookworm + 11 Bullseye ( https://hub.libre.computer/t/raspbian-12-bookworm-and-11-bullseye-for-libre-computer-boards/82 ) (from Libre website) and building HamClock but it failed.?

Hi. Built locally on a fresh install* of LMDE 6 (Faye) without issue, (i5 CPU? 8G RAM.)? The potential jump to another distro was a bit too much to handle at this time! (I used? ./configure