Flrig Built just fine on LMDE 6.
No trace of a "sticky" PTT issue running Flrig on it's own.? (I
spent a minute clicking the PTT button and no stickyness...)
But..?? I have had one occurrence when using the "Tune" button in
Fldigi 4.2.06.9 (PSK31 mode) and this Flrig alpha.
Only ONE occurrence so far, I've spent some minutes clicking the
tune (or T/R) button in Fldigi, and so far only that one stuck PTT
issue.? (Toggling the "Tune" button, recovered it.)
Could there be a way for Flgidi to check the state of Flrig's
TX/RX condition after Fldigi transitions from Transmit to Receive,
and do something to make things safe or warn the operator??? As it
is generally aware of what Flrig does, as it can key the modem (if
configured to do so) if it sees Fldigi going into the Transmit
state?
Is there a possibility of a race condition, relating to the
polling periods, between Flrig and the Radio, versus Fldigi and
Flrig ?
Related (maybe.)? I recall from the past (but can't find it in
Fldigi's configuration settings) that there is (or used to be) a
setting to delay the modem for a period after going into
Transmit.? Is that so, or has my grey cell created a myth?
73.
Dave G0WBX.
