开云体育

did you follow these instructions? https://sourceforge.net/p/fldigi/wiki/linux_serial_howto/ 73, David

I am unable to connect to G90 with either a Linux laptop or Raspberry Pi. 2 different Windows 10 laptops work fine.??I'm using the same radio, USB soundcard and CE-19 for all of the computers.?I'm

About fldigi 4.2.05.17 ADIF specification compliance . change frequency field comma, ",", to period "." Nuts! Now there is ADIF version 3.1.4 compliance in this part! Thank you.

http://www.w1hkj.com/alpha/fldigi/ Index of /alpha/fldigi * Parent Directory <http://www.w1hkj.com/alpha/> * fldigi-4.2.05.17.tar.gz <http://www.w1hkj.com/alpha/fldigi/fldigi-4.2.05.17.tar.gz> *

At first I thought it was in my system settings (Win-7, -10, -11). I tried changing different regional settings - it did not fix the problem. But then, based on the feedback from “our” users, I

Slipped through my memory ?.. The comma is not used as the numeric delimiter on this side of the Atlantic.? Should be just a few lines of code. David

Good day David. About fldigi 4.2.05.16. *Thank you for the work done!* At first glance (as far as I can check at work) everything works correctly. From 05/1/2024 to 05/10/2024 I will test it at RDRC

You're welcome Vladimir.? When you are 85 years old you do not wait for tomorrow to finish a task.? You know that tomorrow may never materialize. David

http://www.w1hkj.com/files/kcat/ and at Source Forge Index of /files/kcat * Parent Directory <http://www.w1hkj.com/files/> * kcat-1.2.5.tar.gz <http://www.w1hkj.com/files/kcat/kcat-1.2.5.tar.gz> *

Great job! Thank you David! I did not imagine that this issue would be resolved so quickly.

http://www.w1hkj.com/alpha/fldigi/ Index of /alpha/fldigi * Parent Directory <http://www.w1hkj.com/alpha/> * fldigi-4.2.05.16.tar.gz <http://www.w1hkj.com/alpha/fldigi/fldigi-4.2.05.16.tar.gz> *

done

send to w1hkj at bellsouth dot net

@w1hkj.com?

Hi, Cliff. Thanks for the suggestion as I’m still familiarizing myself with Mac OS. I checked and the volume is already set to 10. 73, Gary From: [email protected] <[email protected]> on behalf of

Bill, Send me the updated files as attachment to w1hkj@.... David

Hi David I have fixes for two kcat bugs. Based on 1.2.5.2 from your alpha directory, the bugs are: (1) the scanner start frequency can't be changed. The entry field maxes at 999.999 but the value is

Gary, On the Mac go to Audio Midi Setup in Utilities, at least that is where it is on mine and make sure the volume is all the way up on the USB Audio Codec. See Screen Shot. 73, Cliff, AE5ZA

Hi Dave, On my Win10 system now looking like fldigi properly saving and restoring my configuration. And properly writing the FMT csv file. I use the built in logging. Rig control with both flrig

There is currently no way to save or retrieve an export template.? The field selections are not retained between fldigi executions. David