Re: Was the "wants to use the microphone" issue ever fixed?
|
Hi, Cliff.
?
Thanks for the suggestion as I¡¯m still familiarizing myself with Mac OS. I checked and the volume is already set to 10.
?
73,
Gary
?
Gary,
On the Mac go to Audio Midi Setup in Utilities, at least that is where it is on mine and make sure the volume is all the way up on the USB Audio Codec. See Screen Shot.
toggle quoted message
Show quoted text
On May 1, 2024, at 20:01, Gary WA4YMZ via <wa4ymz@...> wrote:
?
Thanks for the suggestions.? As everyone might have realized by now, this is something I could have figured out for myself if I remembered the four letter phrase ¡°RTFM¡± (Read The Friendly Manual)!? After I
was actually seeing a waterfall I tried everything I could think of to have it match what I see when connected to my Win10 laptop and almost everything looks the same now, the exception being that I get much less deflection on the scale at the bottom center
of the form, up to about -50 on the Mac and at least half again on the Win10 laptop, both using SignaLink USB interfaces.? I¡¯m not going to sweat that, though.
Re the lack of waterfall.? ?Try to get some more audio level into the computer from the rig when in RX.
But not so that the "Diamond shaped" indicator changes from Green to Yellow, and definitely not Red!
Or, just adjust the two "WF" levels on the left immediately below the waterfall.? The left most, represents the upper level, the other the dynamic range, in effect Brightness and Contrast!
?
|
Gary WA4YMZ