开云体育

Thanks Bob, Spend a couple of hours this afternoon doing some investigations. As far as I can tell, there is no discernible difference between the two pairs of Audio Codecs. The only difference I can

Hi Phil Enumeration depends on the polling order of the PC and whether the rig(s) are on at the time. If both rigs are on every time you reset the PC's USB bus and the plugs remain in the same sockets

Thanks Bob, The two icoms get enumerated ok, but the enumeration changed after a reboot. Probably as a result of adding the IC705 after the previous reboot. It seems to be stable since. The two FLdigi

Hi Phil Some info for your situation - I use a pulseaudio environment startup to distinguish between between an Icom and QDX. (The Exec command in a desktop file) eg /bin/sh -c

Hi Everybody, I have just released version 0.1alpha of AHRL on the Raspberry Pi 5. https://sourceforge.net/projects/kb1oiq-andysham/files/raspberry_pi/0.1alpha/ Please ask questions and discuss issues

Making some progress. I'm now in the maze of twisty little passages all alike. I reverted to selecting PortAudio->pulse in fl;digi. I found where I can connect a specific instance of fldigi to the

The S meter works. I forgot to enable it.

FLRIG now displays the rig frequency for both VFOs. Initially did not update frequency from the rig when changing bands. It won't when vfoA/B are out of sync. FLRIG dies not change to the rig's VFO

Yip, Please substitute the attached for the file of the same name in src/rigs/kenwood/ Rebuild, test, and report results. Dave

Yip, That is already in the TS-570/S code. transmit: TX; receive : RX; David

Steve, Please repeat your testing using the attached file for FT890.cxx David

After a reboot, the USB Audio Codecs occasionally both appear in the PortAudio drop down lists. What I had forgotten as it used to work is that I get a lot audio related output on the terminal (see

Until recently I sort of had this sussed. Running debian bookworm. Fldigi 4.2.04.09. The only rig I used with FLdigi was my IC-7300. I had configured fldigi to use pulseaudio. After a reboot the order

Thank you Steve.

I don't remember the frequency values of the first log, so I repeated some of the tests. Taking bytes 1-3 (counting from 0) of the VFO/Memory Data Record (9 Bytes), and converting the hexadecimal

Hi David Can you help add TRX On/ Off Function for?Kenwood TS-570 in Flrig? 73 Yip VR2VRC

Can you please annotate the trace log to indicate what the actual vfo A/B values were at the transceiver.? Thank you. David

The S meter reads lower than the rig's meter.

After recompiling with the updated FT890.cxx Init works now. The rig is recognized. Both the red and green receive/send lights flash periodically. Modulation mode works, where it was disabled before,

Read through the FT-890 pdf manual, and it looks like flrig is expecting to receive the wrong number of bytes.? Please substitute the attached file for the one with the same name in