Can you please annotate the
trace log to indicate what the actual vfo A/B values were at the
transceiver.? Thank you.
David
On 4/15/24 23:11, Steve, KB5AW wrote:
toggle quoted message
Show quoted text
After recompiling with the updated FT890.cxx
Init works now. The rig is recognized. Both the red and green
receive/send lights flash periodically.
Modulation mode works, where it was disabled before, but does not
read the rig's mode.
Still does not read the rig's VFO freq, but it still writes to the
rig.
In Operating Controls: Freq and Mode are checked.
Buttons for vfoA vfoB and A/B work, but changing vfoB in FLRIG
does not change the rig's (vfo b) freq.
S-meter works when enabled.
PTT puts the rig in transmit.
Changing the timing parameters had no effect.
Changing the comm parameters did not help.
I have attached a trace log that starts with the init.
Dave, W1HKJ