kcat bug fixes - how to submit
Hi David
I have fixes for two kcat bugs. Based on 1.2.5.2 from your alpha directory, the bugs are:
(1) the scanner start frequency can't be changed. The entry field maxes at 999.999 but the value is in kHz. I changed it to allow 2 more digits.
(2) There are tuning errors sprinkled throughout the bands due to a bug when a 0x00 byte occurs in the frequency. The copy of the frequency into the buffer sent to the rig stops at the zero, even though the zero is a significant value and there may be more values after. When the zero is in the lowest byte it causes no problem, since zero is zero. When it's in the second byte it makes a tuning glitch about 111 Hz wide which may go unnoticed. When the zero is in the third byte it's a bigger issue, a hole in the spectrum about 29 kHz wide. But these only happen on multiples of 7.5 MHz so aren't in the ham bands. But tuning WWV at 15.000 MHz becomes a challenge.
I have fixed both of these in my copy. Let me know if/how you'd like me to send the changes, or if you want more info first.
Thanks - Bill N7DZ
|
Re: Was the "wants to use the microphone" issue ever fixed?
Gary,
On the Mac go to Audio Midi Setup in Utilities, at least that is where it is on mine and make sure the volume is all the way up on the USB Audio Codec. See Screen Shot.
toggle quoted message
Show quoted text
On May 1, 2024, at 20:01, Gary WA4YMZ via < wa4ymz@...> wrote:
Hi, Dave. ? Thanks for the suggestions.? As everyone might have realized by now, this is something I could have figured out for myself if I remembered the four letter phrase ¡°RTFM¡± (Read The Friendly Manual)!? After I was actually seeing a waterfall I tried everything I could think of to have it match what I see when connected to my Win10 laptop and almost everything looks the same now, the exception being that I get much less deflection on the scale at the bottom center of the form, up to about -50 on the Mac and at least half again on the Win10 laptop, both using SignaLink USB interfaces.? I¡¯m not going to sweat that, though. ? Thanks, again! ? Gary. ? Re the lack of waterfall.? ?Try to get some more audio level into the computer from the rig when in RX. But not so that the "Diamond shaped" indicator changes from Green to Yellow, and definitely not Red! Or, just adjust the two "WF" levels on the left immediately below the waterfall.? The left most, represents the upper level, the other the dynamic range, in effect Brightness and Contrast!
|
Re: fldigi 4.2.05.15 development (test) version posted at
Hi Dave,
On my Win10 system now looking like fldigi properly saving and restoring my configuration. And properly writing the FMT csv file. I use the built in logging. Rig control with both flrig 2.0.05.45 and the K4.xml rigcat file working nice. After a very long fmt run using flrig I sometimes find flrig not talking to my K4 when shifting to a different WWV or CHU frequency but that might be a K4 problem.
I am saving away the fldigi data folder before upgrading but did not need that upgrading to x.15.
Thanks, tom w7sua
toggle quoted message
Show quoted text
On 4/29/2024 1:44 PM, Dave, W1HKJ via groups.io wrote:
Index of /alpha/fldigi
* Parent Directory <>
* fldigi-4.2.05.15.tar.gz
<>
* fldigi-4.2.05.15_LI.dmg
<>
* fldigi-4.2.05.15_VN.dmg
<>
* fldigi-4.2.05.15_setup.exe
<>
* readme.dmg.txt <>
* readme.txt <>
Author: dave-w1hkj <w1hkj@...>
Date:?? Fri Apr 26 01:26:08 2024 -0500
??? UDP log record
????? * add write log record to UDP socket concurrent with other
??????? internal and external logbook recording.? UDP record in
??????? ADIF format and contains either all adif fields or those
??????? selected on the UDP export fields dialog.? The record is
??????? terminated by <EOR>
Author: dave-w1hkj <w1hkj@...>
Date:?? Sat Apr 27 07:44:58 2024 -0500
??? FMT thread
????? * insure that FMT thread is closed when modem is deleted
??????? . windows gags on multiple threads writing to same object
????? * put a whole file lock on the csv file during entire time
??????? it is being written to by the FMT modem.? Excel is an
??????? ultra greedy application that attempts to lock a file before
??????? any reads or writes and does so even to a file opened for
??????? write by another program.? Bah Humbug!
73, David, W1HKJ
|
There is currently no way to
save or retrieve an export template.? The field selections are
not retained between fldigi executions.
David
On 5/2/24 11:15, Glenn Jensen, WA6BJQ
wrote:
toggle quoted message
Show quoted text
Just a quick confirmation - I tied to my Cloudlog instance, and
yes.... I too lost the parameters set in the
"logbook/adif/export" pick list.
This may be by design?? Or do I need to set these parameters
specifically for 'your' Cloudlog environment; export can be used
for other reasons, but the reset button could fix any
customization (as long as you could save a 'cloudlog template'
?(or templates for other systems).
Great work .... love the FLseries (run it on linux, macOS, and
Win11).
73's,
Glenn
On 5/2/24 07:56, Glenn Jensen, WA6BJQ
via groups.io wrote:
Good morning all -
After looking at Vladimir's pictures, while it most likely is
not the case, is there a tie between not having 'cloudlog'
selected, and saving the fields that UDP will be promoting.
73's - Glenn
On 5/2/24 04:50, Dave, W1HKJ via
groups.io wrote:
Good morning Vladimir,
Today I will work on the items needing correction.
David
On 5/2/24 05:09, Vladimir, RW6AVK
wrote:
1) At this moment (fldigi 4.2.05.15) when
selecting all checkboxes, the following is transmitted via
UDP:
<CALL:4>R2DK<SUBMODE:0><FREQ:9>14,072470<BAND:3>20m<QSO_DATE:8>20240502<TIME_ON:4>0950<QSO_DATE_OFF:8>20240502<TIME_OFF:4>0950<NAME:5>Serge<QTH:10>Ivanteevka<STATE:0><VE_PROV:0><COUNTRY:15>European Russia<RST_SENT:3>599<RST_RCVD:3>599<TX_PWR:2>43<CNTY:0><DXCC:0><CQZ:2>16<IOTA:0><CONT:0><ITUZ:0><GRIDSQUARE:6>KO85WX<QSLRDATE:0><QSLSDATE:0><EQSLRDATE:0><EQSLSDATE:0><LOTWRDATE:0><LOTWSDATE:0><NOTES:0><SRX:0><STX:3>000<SRX_STRING:0><STX_STRING:0><CLASS:0><ARRL_SECT:0><OPERATOR:6>RW6AVK<STATION_CALLSIGN:6>RW6AVK<MY_GRIDSQUARE:6>KN95LA<MY_CITY:9>Krasnodar<CHECK:0><AGE:0><TEN_TEN:0><EOR>
<submode> is not transmitted - a tag indicating the
length of the line 0 is sent, and there is no <mode>
at all.
But when using some modulations, only MODE is transmitted
(HELL or DOMINO)
2) ADIF says that the delimiter in the frequency field can
only be "." = "," is not provided.
|
Just a quick confirmation - I tied to my Cloudlog instance, and
yes.... I too lost the parameters set in the "logbook/adif/export"
pick list.
This may be by design?? Or do I need to set these parameters
specifically for 'your' Cloudlog environment; export can be used
for other reasons, but the reset button could fix any
customization (as long as you could save a 'cloudlog template'
?(or templates for other systems).
Great work .... love the FLseries (run it on linux, macOS, and
Win11).
73's,
Glenn
On 5/2/24 07:56, Glenn Jensen, WA6BJQ
via groups.io wrote:
toggle quoted message
Show quoted text
Good morning all -
After looking at Vladimir's pictures, while it most likely is
not the case, is there a tie between not having 'cloudlog'
selected, and saving the fields that UDP will be promoting.
73's - Glenn
On 5/2/24 04:50, Dave, W1HKJ via
groups.io wrote:
Good morning Vladimir,
Today I will work on the items needing correction.
David
On 5/2/24 05:09, Vladimir, RW6AVK
wrote:
1) At this moment (fldigi 4.2.05.15) when
selecting all checkboxes, the following is transmitted via
UDP:
<CALL:4>R2DK<SUBMODE:0><FREQ:9>14,072470<BAND:3>20m<QSO_DATE:8>20240502<TIME_ON:4>0950<QSO_DATE_OFF:8>20240502<TIME_OFF:4>0950<NAME:5>Serge<QTH:10>Ivanteevka<STATE:0><VE_PROV:0><COUNTRY:15>European Russia<RST_SENT:3>599<RST_RCVD:3>599<TX_PWR:2>43<CNTY:0><DXCC:0><CQZ:2>16<IOTA:0><CONT:0><ITUZ:0><GRIDSQUARE:6>KO85WX<QSLRDATE:0><QSLSDATE:0><EQSLRDATE:0><EQSLSDATE:0><LOTWRDATE:0><LOTWSDATE:0><NOTES:0><SRX:0><STX:3>000<SRX_STRING:0><STX_STRING:0><CLASS:0><ARRL_SECT:0><OPERATOR:6>RW6AVK<STATION_CALLSIGN:6>RW6AVK<MY_GRIDSQUARE:6>KN95LA<MY_CITY:9>Krasnodar<CHECK:0><AGE:0><TEN_TEN:0><EOR>
<submode> is not transmitted - a tag indicating the
length of the line 0 is sent, and there is no <mode> at
all.
But when using some modulations, only MODE is transmitted
(HELL or DOMINO)
2) ADIF says that the delimiter in the frequency field can
only be "." = "," is not provided.
|
The two are independent
On 5/2/24 09:56, Glenn Jensen, WA6BJQ
wrote:
toggle quoted message
Show quoted text
Good morning all -
After looking at Vladimir's pictures, while it most likely is
not the case, is there a tie between not having 'cloudlog'
selected, and saving the fields that UDP will be promoting.
73's - Glenn
On 5/2/24 04:50, Dave, W1HKJ via
groups.io wrote:
Good morning Vladimir,
Today I will work on the items needing correction.
David
On 5/2/24 05:09, Vladimir, RW6AVK
wrote:
1) At this moment (fldigi 4.2.05.15) when
selecting all checkboxes, the following is transmitted via
UDP:
<CALL:4>R2DK<SUBMODE:0><FREQ:9>14,072470<BAND:3>20m<QSO_DATE:8>20240502<TIME_ON:4>0950<QSO_DATE_OFF:8>20240502<TIME_OFF:4>0950<NAME:5>Serge<QTH:10>Ivanteevka<STATE:0><VE_PROV:0><COUNTRY:15>European Russia<RST_SENT:3>599<RST_RCVD:3>599<TX_PWR:2>43<CNTY:0><DXCC:0><CQZ:2>16<IOTA:0><CONT:0><ITUZ:0><GRIDSQUARE:6>KO85WX<QSLRDATE:0><QSLSDATE:0><EQSLRDATE:0><EQSLSDATE:0><LOTWRDATE:0><LOTWSDATE:0><NOTES:0><SRX:0><STX:3>000<SRX_STRING:0><STX_STRING:0><CLASS:0><ARRL_SECT:0><OPERATOR:6>RW6AVK<STATION_CALLSIGN:6>RW6AVK<MY_GRIDSQUARE:6>KN95LA<MY_CITY:9>Krasnodar<CHECK:0><AGE:0><TEN_TEN:0><EOR>
<submode> is not transmitted - a tag indicating the
length of the line 0 is sent, and there is no <mode> at
all.
But when using some modulations, only MODE is transmitted
(HELL or DOMINO)
2) ADIF says that the delimiter in the frequency field can
only be "." = "," is not provided.
|
Re: Can't find LPM setting in WEFAX
Looks fine to me.
Marty kd8bj
toggle quoted message
Show quoted text
On 5/2/24 08:13, Asbesto, IW9HGS via groups.io wrote: Is my message readable? I'm not sure anyone can read this
|
Good morning all -
After looking at Vladimir's pictures, while it most likely is not
the case, is there a tie between not having 'cloudlog' selected,
and saving the fields that UDP will be promoting.
73's - Glenn
On 5/2/24 04:50, Dave, W1HKJ via
groups.io wrote:
toggle quoted message
Show quoted text
Good morning Vladimir,
Today I will work on the items needing correction.
David
On 5/2/24 05:09, Vladimir, RW6AVK
wrote:
1) At this moment (fldigi 4.2.05.15) when selecting
all checkboxes, the following is transmitted via UDP:
<CALL:4>R2DK<SUBMODE:0><FREQ:9>14,072470<BAND:3>20m<QSO_DATE:8>20240502<TIME_ON:4>0950<QSO_DATE_OFF:8>20240502<TIME_OFF:4>0950<NAME:5>Serge<QTH:10>Ivanteevka<STATE:0><VE_PROV:0><COUNTRY:15>European Russia<RST_SENT:3>599<RST_RCVD:3>599<TX_PWR:2>43<CNTY:0><DXCC:0><CQZ:2>16<IOTA:0><CONT:0><ITUZ:0><GRIDSQUARE:6>KO85WX<QSLRDATE:0><QSLSDATE:0><EQSLRDATE:0><EQSLSDATE:0><LOTWRDATE:0><LOTWSDATE:0><NOTES:0><SRX:0><STX:3>000<SRX_STRING:0><STX_STRING:0><CLASS:0><ARRL_SECT:0><OPERATOR:6>RW6AVK<STATION_CALLSIGN:6>RW6AVK<MY_GRIDSQUARE:6>KN95LA<MY_CITY:9>Krasnodar<CHECK:0><AGE:0><TEN_TEN:0><EOR>
<submode> is not transmitted - a tag indicating the length
of the line 0 is sent, and there is no <mode> at all.
But when using some modulations, only MODE is transmitted (HELL
or DOMINO)
2) ADIF says that the delimiter in the frequency field can only
be "." = "," is not provided.
|
Re: Can't find LPM setting in WEFAX
Is my message readable? I'm not sure anyone can read this
|
Good morning Vladimir,
Today I will work on the items needing correction.
David
On 5/2/24 05:09, Vladimir, RW6AVK
wrote:
toggle quoted message
Show quoted text
1) At this moment (fldigi 4.2.05.15) when selecting
all checkboxes, the following is transmitted via UDP:
<CALL:4>R2DK<SUBMODE:0><FREQ:9>14,072470<BAND:3>20m<QSO_DATE:8>20240502<TIME_ON:4>0950<QSO_DATE_OFF:8>20240502<TIME_OFF:4>0950<NAME:5>Serge<QTH:10>Ivanteevka<STATE:0><VE_PROV:0><COUNTRY:15>European Russia<RST_SENT:3>599<RST_RCVD:3>599<TX_PWR:2>43<CNTY:0><DXCC:0><CQZ:2>16<IOTA:0><CONT:0><ITUZ:0><GRIDSQUARE:6>KO85WX<QSLRDATE:0><QSLSDATE:0><EQSLRDATE:0><EQSLSDATE:0><LOTWRDATE:0><LOTWSDATE:0><NOTES:0><SRX:0><STX:3>000<SRX_STRING:0><STX_STRING:0><CLASS:0><ARRL_SECT:0><OPERATOR:6>RW6AVK<STATION_CALLSIGN:6>RW6AVK<MY_GRIDSQUARE:6>KN95LA<MY_CITY:9>Krasnodar<CHECK:0><AGE:0><TEN_TEN:0><EOR>
<submode> is not transmitted - a tag indicating the length
of the line 0 is sent, and there is no <mode> at all.
But when using some modulations, only MODE is transmitted (HELL or
DOMINO)
2) ADIF says that the delimiter in the frequency field can only be
"." = "," is not provided.
|
1) At this moment ( fldigi 4.2.05.15) when selecting all checkboxes, the following is transmitted via UDP:
<CALL:4>R2DK<SUBMODE:0><FREQ:9>14,072470<BAND:3>20m<QSO_DATE:8>20240502<TIME_ON:4>0950<QSO_DATE_OFF:8>20240502<TIME_OFF:4>0950<NAME:5>Serge<QTH:10>Ivanteevka<STATE:0><VE_PROV:0><COUNTRY:15>European Russia<RST_SENT:3>599<RST_RCVD:3>599<TX_PWR:2>43<CNTY:0><DXCC:0><CQZ:2>16<IOTA:0><CONT:0><ITUZ:0><GRIDSQUARE:6>KO85WX<QSLRDATE:0><QSLSDATE:0><EQSLRDATE:0><EQSLSDATE:0><LOTWRDATE:0><LOTWSDATE:0><NOTES:0><SRX:0><STX:3>000<SRX_STRING:0><STX_STRING:0><CLASS:0><ARRL_SECT:0><OPERATOR:6>RW6AVK<STATION_CALLSIGN:6>RW6AVK<MY_GRIDSQUARE:6>KN95LA<MY_CITY:9>Krasnodar<CHECK:0><AGE:0><TEN_TEN:0><EOR>
<submode> is not transmitted - a tag indicating the length of the line 0 is sent, and there is no <mode> at all. But when using some modulations, only MODE is transmitted (HELL or DOMINO) 2) ADIF says that the delimiter in the frequency field can only be "." = "," is not provided.
|
Re: fldigi 4.2.05.15 development (test) version posted at
On Mon, Apr 29, 2024 at 08:44 PM, Dave, W1HKJ wrote:
all adif fields or those selected on the UDP export fields dialog
Good Day. After closing (with saving), the checkboxes are not remembered.
|
Good day David.
After closing (with saving), the checkboxes are not remembered. In Win-7 x86 checkbox "Band" not responsive (on or off) - does not add to the line.
|
Re: Was the "wants to use the microphone" issue ever fixed?
Hi, Dave.
?
Thanks for the suggestions.? As everyone might have realized by now, this is something I could have figured out for myself if I remembered the four letter phrase ¡°RTFM¡± (Read The Friendly Manual)!? After I
was actually seeing a waterfall I tried everything I could think of to have it match what I see when connected to my Win10 laptop and almost everything looks the same now, the exception being that I get much less deflection on the scale at the bottom center
of the form, up to about -50 on the Mac and at least half again on the Win10 laptop, both using SignaLink USB interfaces.? I¡¯m not going to sweat that, though.
?
Thanks, again!
?
Gary.
?
Re the lack of waterfall.? ?Try to get some more audio level into the computer from the rig when in RX.
But not so that the "Diamond shaped" indicator changes from Green to Yellow, and definitely not Red!
Or, just adjust the two "WF" levels on the left immediately below the waterfall.? The left most, represents the upper level, the other the dynamic range, in effect Brightness and Contrast!
|
Re: Was the "wants to use the microphone" issue ever fixed?
Re the lack of waterfall.? ?Try to get some more audio level into the computer from the rig when in RX.
But not so that the "Diamond shaped" indicator changes from Green to Yellow, and definitely not Red!
Or, just adjust the two "WF" levels on the left immediately below the waterfall.? The left most, represents the upper level, the other the dynamic range, in effect Brightness and Contrast!
Have Fun!
Dave G0WBX
|
Re: Was the "wants to use the microphone" issue ever fixed?
It isn¡¯t just flrig but also fldigi that you have helped me with, and ?that has allowed me to get back the use of one of my favorite applications, while also getting one step closer to throwing off my need
for Windows.? To be honest, it was a podcast I listened to recently that gave the Apple universe much higher marks for security than the competitors.? Granted, that was in relation to storage and web browsing, especially when combined with the Google suite,
that has led me in this direction.?
?
Those of us who have made the change, or perhaps just started out here, appreciate your efforts to take their lawyers and developers actions as a challenge and continue to win the battle.
?
BTW, unless you have nothing else going on that requires your attention, don¡¯t feel the need to jump right into this last issue.? On the other hand, if you see this as your next challenge, who am I to tell
you otherwise.? ?
?
Gary ?
?
Can't say without some testing Gary.? First thing tomorrow morning.
Glad to hear that my suggestions for flrig worked for you.? Apple security lawyers/developers are making it more difficult to jump through the burning ring with each new OS release.
Dave
toggle quoted message
Show quoted text
On 4/30/24 18:30, Gary WA4YMZ via groups.io wrote:
Hi, Dave.
Thanks, once again.? Bingo!? Everything is working now once I swapped out the RS-232 interface cable I had been using (first rig had only this typoe port for control and the PC had a real D25 serial port) but following your detailed instructions I removed that
and now have a USB-A - USB-B cable between the radio and the Mac.? I even changed JS8Call and WSJT-X to use the flrig.rig as the "radio"and they both work as expected.
The only thing that I have still an issue with is that there is nothing appearing in the waterfall.? As seen in the screen snip, here I am monitoring Angelo, WA2UJR, who was coming in very strong.? I tried everything that came to mind to have a visible waterfall
but no joy.? Any thoughts on what I'm missing?
Thanks once again.
Gary
?
|
Re: Was the "wants to use the microphone" issue ever fixed?
Can't say without some testing
Gary.? First thing tomorrow morning.
Glad to hear that my suggestions for flrig worked for you.?
Apple security lawyers/developers are making it more difficult
to jump through the burning ring with each new OS release.
Dave
On 4/30/24 18:30, Gary WA4YMZ via
groups.io wrote:
toggle quoted message
Show quoted text
Hi, Dave.
Thanks, once again.? Bingo!? Everything is working now once I
swapped out the RS-232 interface cable I had been using (first rig
had only this typoe port for control and the PC had a real D25
serial port) but following your detailed instructions I removed
that and now have a USB-A - USB-B cable between the radio and the
Mac.? I even changed JS8Call and WSJT-X to use the flrig.rig as
the "radio"and they both work as expected.
The only thing that I have still an issue with is that there is
nothing appearing in the waterfall.? As seen in the screen snip,
here I am monitoring Angelo, WA2UJR, who was coming in very
strong.? I tried everything that came to mind to have a visible
waterfall but no joy.? Any thoughts on what I'm missing?
Thanks once again.
Gary
|
Re: Was the "wants to use the microphone" issue ever fixed?
Hi, Dave. Thanks, once again.? Bingo!? Everything is working now once I swapped out the RS-232 interface cable I had been using (first rig had only this typoe port for control and the PC had a real D25 serial port) but following your detailed instructions I removed that and now have a USB-A - USB-B cable between the radio and the Mac.? I even changed JS8Call and WSJT-X to use the flrig.rig as the "radio"and they both work as expected. The only thing that I have still an issue with is that there is nothing appearing in the waterfall.? As seen in the screen snip, here I am monitoring Angelo, WA2UJR, who was coming in very strong.? I tried everything that came to mind to have a visible waterfall but no joy.? Any thoughts on what I'm missing? Thanks once again. Gary 
|
Re: Was the "wants to use the microphone" issue ever fixed?
Regarding flrig on Ventura
14.4.1.? Tested using my Macbook Air with USB interface cable to
FT-710.? The FT-710 and FTdx10 use similar USB port h/w.
- install the CP210 driver
found at
- reboot the computer
after successful installation
- plug in FT-xxx cable if
not already attached
- execute flrig and before
attempting to configure for the Yaesu transceiver
- open System Settings
application
- go to Privacy &
Security / Blue tooth
- allow flrig to use
Bluetooth.? do not know why this worked but it did
- check the transceiver
USB serial baud rate,?? I use 115200 for my FT-710.
- open the flrig
Configuration dialog? to Xcvr
- select the transceiver
- select the /dev/cu.SLAB_USBtoUART device.? The
/dev/tty.SLAB_USBtoUART was not accessible.? On Ventura the
"tty" devices are opend in lock mode and it appears that
either another application (or the flrig serial port discovery
code) did not completely close that access port.
- set the baud to be the
same as the Xcvr
- set 1 stop bit
- set RTS/CTS
- set Poll Intvl to 100
- press the Init button
- shut down flrig and
restart ... SUCCESS
- enable "Rig auto On" and
"Rig auto OFF" on the drop down extras tabs, Misc.
- shut down flrig.?
transceiver should turn OFF.
- start flrig.?
transceiver will be discovered and turned ON
73 David, W1HKJ
On 4/29/24 21:39, Gary WA4YMZ via
groups.io wrote:
toggle quoted message
Show quoted text
Hi, Dave.
?
It looks
like we¡¯re almost there.? Using the steps below fldigi opens
and that ¡°use the microphone¡± question is no longer popping
up.? I¡¯m even able to decode signals.? Yea! I do have a
terminal window open, though, and it just sits there doing
nothing until I close fldigi, at which time it says:
?
Saving session...
...copying shared history...
...saving history...truncating
history files...
...completed.
?
[Process completed]
?
Unfortunately,
for some reason the waterfall is blank so I have to rely on
the Channels frame to see where the signals are.
?
There is no
$HOME/.flrig/FTDX10.prefs file, probably because I never get
to the point where I can save the configuration.? If it
helps, here are the contents of my flrig.prefs file:
?
; FLTK
preferences file format 1.0
; vendor:
w1hkj.com
;
application: flrig
?
[.]
?
xcvr_name:NONE
?
My apologies
for all of the trouble but your help is greatly appreciated.
?
Gary
?
Gary,
For fldigi, please try this
Open Finder to /Applications
Right click on the fldigi icon and select "Open
Contents"
Double click "Contents"
Double click "MacOS"
Double click on the fldigi icon.
Does fldigi open without the microphone sob story?
For flrig,? Send me this file $HOME/.flrig/FTDX10.prefs
Dave
On 4/29/24 17:32, Gary WA4YMZ via
groups.io wrote:
Hi,
Dave.
?
FLRig
2.0.05.45.
?
Gary
?
Which
version of flrig please?
On 4/29/24 16:42, Gary WA4YMZ
via groups.io wrote:
I'm desperately trying to
ditch Windows and right now the only thing
keeping me there is I am still not able to start
Flrig and FLDigi on my M1 Mac Mini (Sonoma
14..4.1, FTDX10, Signalink). ?
On Flrig, once I set the Rig, Update, and Baud
fields correctly then click Init I get a
never-ending beachball and have to force quit.
On FLDigi I still can't get past the "would like
to access the microphone" pop-up, no matter how
many times I click Allow.
JS8Call is working like a dream and if I move
the cables to a Windows laptop FLDigi works
great there.
Any thoughts?? Please forgive me if the solution
has been posted and I missed it.
Thanks,
Gary
Wa4ymz
FM05pp?
?
?
|
Re: Was the "wants to use the microphone" issue ever fixed?
Hi, Dave.
?
It looks like we¡¯re almost there.? Using the steps below fldigi opens and that ¡°use the microphone¡± question is no longer popping up.? I¡¯m even able to decode signals.? Yea! I do have a terminal window open,
though, and it just sits there doing nothing until I close fldigi, at which time it says:
?
Saving session...
...copying shared history...
...saving history...truncating history files...
...completed.
?
[Process completed]
?
Unfortunately, for some reason the waterfall is blank so I have to rely on the Channels frame to see where the signals are.
?
There is no $HOME/.flrig/FTDX10.prefs file, probably because I never get to the point where I can save the configuration.? If it helps, here are the contents of my flrig.prefs file:
?
; FLTK preferences file format 1.0
; vendor: w1hkj.com
; application: flrig
?
[.]
?
xcvr_name:NONE
?
My apologies for all of the trouble but your help is greatly appreciated.
?
Gary
?
Gary,
For fldigi, please try this
Open Finder to /Applications
Right click on the fldigi icon and select "Open Contents"
Double click "Contents"
Double click "MacOS"
Double click on the fldigi icon.
Does fldigi open without the microphone sob story?
For flrig,? Send me this file $HOME/.flrig/FTDX10.prefs
Dave
toggle quoted message
Show quoted text
On 4/29/24 17:32, Gary WA4YMZ via groups.io wrote:
Hi, Dave.
?
FLRig 2.0.05.45.
?
Gary
?
Which version of flrig please?
On 4/29/24 16:42, Gary WA4YMZ via groups.io wrote:
I'm desperately trying to ditch Windows and right now the only thing keeping me there is I am still not able to start Flrig and FLDigi on my M1 Mac Mini (Sonoma 14..4.1, FTDX10, Signalink). ?
On Flrig, once I set the Rig, Update, and Baud fields correctly then click Init I get a never-ending beachball and have to force quit.
On FLDigi I still can't get past the "would like to access the microphone" pop-up, no matter how many times I click Allow.
JS8Call is working like a dream and if I move the cables to a Windows laptop FLDigi works great there.
Any thoughts?? Please forgive me if the solution has been posted and I missed it.
Thanks,
Gary
Wa4ymz
FM05pp?
?
?
|
Bill, N7DZ
Dave, W1HKJ
Glenn Jensen, WA6BJQ
Asbesto, IW9HGS
Gary WA4YMZ