开云体育

Hello, On my Linux installs, whether ARM or Intel hardware, I dump Chromium. I run Firefox instead. I have no problem running CUPS. Cheers, Robert KG4KGL

Here's a follow up to the Fldigi lockup problem. So I'm now using Ubuntu 24.04. Tonight on a local FM repeater NBEMS net I was so happy because everything was working great. There was a lot of

Thanks for the response! In the case of the X6200, it shows 4 ports. Two "cu.*" ports and two "tty.*" ports. The correct ones to use with the X6200 are the tty ports. And they never appear to flip (or

lsof from homebrew can verify that: $ lsof /dev/cu.* COMMAND PID USER FD TYPE DEVICE SIZE/OFF NODE NAME flrig 45225 arekm 9u CHR 9,5 0t0 12413 /dev/cu.SLAB_USBtoUART flrig 45225 arekm 13u CHR 9,7

I've had flrig working on my MacBook Air (M2, running macOS 15.2) for a few days with my Xiegu X6200 (using the X6100 rig choice in prefs). With the exception of needing to reboot between usages of it

Hello John, This certificate would be at the OS aka system-wide level. To be honest, I would just recommend to accept the self-signed certificate for home internal uses. If you really don't like that

Hi David, Is the certificate something I must install or is it something the CUPS web server must install? John

Workaround/solution found.? Open .nbems folder, see file names FLMSGprefs.? delete that file.? When you restart FLMSG you will have to reconfigure your call sign and other configuration settings

I had to do a rebuild and can't get fldigi to control my FTDX10. Radio works fine using CAT in WSJT-X so I know USB communications will work. I am getting a good waterfall in Fldigi and PSK31 decodes.

Hi David, Thanks for getting back to me. Attached is the trace.txt file with the settings shown above. I do have polling enabled in the settings and perhaps the polling rate is set too high, but I

Hello John, This is probably due to Chromium insisting on using HTTPS but CUPS is using a self-signed HTTPS x.509 certificate. You can either choose to tell Chromium to trust and accept this local

I had cups running OK on an SD card before I switched to an NVMe device and mistakenly managed to overwrite my SD card.? I started over and am now running only on the official Pi NVMe ssd . Using the

Dave, Here is a curiosity question: I am running the current alpha code (4.2.06.15) now, but have seen this multiple line blurring effect going back a ways in previous versions. If I run fldigi on

The objective is to open a previously-received file and relay it.? I cannot open a file from file | open. file | folders, double click on a file - file opens in mousepad but not in the FLMSG window.

My two Pegasus died years ago.? I am surprised to hear of someone still using one.I will need to see the trace file output during Rx and Tx.? Set up flrig as shown here: After shutting down, send me

Hello, I am trying to get fldigi to talk with my PicoRX via its Kenwood TS-480 emulation but all that happens is that fldigi stalls until it runs out of retries I think. Has anyone had any luck

Just a bump for attention, don't know if there is a better place to post this to get noticed or not... If so, please let me know!

Re:- From: Mark, KE8NHT Ohio Date: Mon, 16 Dec 2024 19:25:21 GMT Do you have Config Settings> Misc > Save Parameters> AFC Control checked or not? I did notice at one point that it prevented changing

Szia Ervin, Yes, this is a great help, thank you. Lev -- Levente Kovacs Senior Electronic Engineer W: http://levente.logonex.eu

I have port audio checked and pipewire assigned to capture and playback. I try it a bit and see how it works. If I have trouble I'll change to pulse audio. Ron NY3J