开云体育

Brian, Apply the attached patch (or wait for next source release / push to Source Forge) Dave

"Dave, W1HKJ" <w1hkj@...> wrote: FYI Dave there is a newly created 'feature' in hamlib-4.6~git that caused some problems with compilation in freedv. It seems to be the same with fldigi:

at http://www.w1hkj.com/alpha/fldigi/ Index of /alpha/fldigi * Parent Directory <http://www.w1hkj.com/alpha/> * fldigi-4.2.03.08.tar.gz <http://www.w1hkj.com/alpha/fldigi/fldigi-4.2.03.08.tar.gz> *

You should see what we see on 40m and 20m over hear re FT8/JS8 "QRM" leaching over other band segments a lot of the time. Evidence of harmonic distortion in the TX audio stages, as often two or three

I just finished drafting a set of custom forms for use with flmsg (v4.0.17).? The forms were constructed using an external CSS reference (<link rel="stylesheet" href="mycss.css"> inside the HTML

There is a flrig.prefs and a rig.prefs the radio name.prefs is it starts and gets setup. It's created on the first exit so it you're hanging and completing a normal setup and close down then no

I can confirm that transmitting with pulse causes the audio thread to 100% cpu usage and a zombie after exiting the program.? This is on Linux Mint 21.2 64 bit.? No change from earlier version.

Hi, I am having the same problem: 1.4.7 works fine on my M1 MBP, running OSX13.4.1, but upgrading to flrig 2.0.03 or 04 simply won't start. I cannot locate a xiegu.prefs file in my Home directory

See responses in-line - ZZA Sent: 29 November 2023 17:38 To: ham-software@...; ham-mac; winfldigi; [email protected]; [email protected] Subject: [linuxham] #whats wrong with this image My

I'll try the build next.? I wanted to be sure that the static linked binary in the deb would work OK. I extracted all files from the deb and installed manually.? The problem is with the way that the

"David Ranch, KI6ZHD" <linuxham-fld@...> wrote: Fedora uses Wayland by default these days for several DEs, but the current release, 39, still has fltk-1.3.8 at present. AFAICS there is not yet

My original post was not intended to start a range war, but to elicit thought on the subject.? So far I've seen a few good answers.? Dave, KX3DX, and Tom, W7SUA,? being the most thought provoking.

I noticed FT8 signals down around 7.056 early (0800 - 0900Z) yesterday morning. When I fired up JTDX, they were all Japanese stations calling a Honduran (I think?) station. Looking at the freq list in

The picture looks like FT8 or JS8 signals with users filling all space they think is not being used. Last night was a 40m FT8 signal with what I would have called 3rd order intermod products above and

The picture looks like FT8 or JS8 signals with users filling all space they think is not being used. Last night was a 40m FT8 signal with what I would have called 3rd order intermod products above and

Dave, Thank you.? long ago,? I bought two cable-less devices earlier but they were not compatible with Windows 11, so this has been an ongoing game.. Ordered cables, to arrive "before Christmas" J.,

The Country (CTY) Files were updated on 29 November 2023: https://www.country-files.com/cty-3339-29-november-2023/ For installation instructions, start at: https://www.country-files.com/ Hover your

THOR-11 and I am in the 40 meter frequency space usually associated with BPSK-31 and other chat modes.? These all look like automated WSJTX signals that are overflowing from the usual 7073 to 7076

I'd say you're in the wrong mode. The red line width seems like you're using a wider mode like MFSK16 or something like that but your waterfall looks to be showing BPSK31 signals. --David KI6ZHD

And VK9CY is using MSHV, not WSJTX. Edd - KD5M