I am slightly embarrassed to bring this up, I thought I knew how to do this, but I'm stuck.??
?
I have a Win 11 laptop, I downloaded the windows drivers from Yaesu, connected to the radio, FLRig immediately worked.??
?
I have a Raspberry Pi running bookworm.? I switched it from Pipeline to Pulse and from Wayland to X11.? lsusb shows the Silicon Laps CP2105 Dual UART Bridge.? When I open Pulse, it shows PCM2903C Audio CODEC but it does not show any USB drivers.? When I try FLRIG config FTDX10, click update then select
?
"/dev/serial/by-id/usb-Silicon_Labs_CP2105_Dual_USB_to_UART_Bridge_Controller_01829563-if00-port0",
?
baud=38400 and 1 stop bit, and click Init, I get "Transceiver not responding".? If I try the other port:
?
"/dev/serial/by-id/usb-Silicon_Labs_CP2105_Dual_USB_to_UART_Bridge_Controller_01829563-if01-port0"
?
... I get the same thing.? I tried to search for a solution and did not find anything. I have two more RP with identical config running a Yaesu FT710 and a Yaesu FT897.? Both are excellent, no issues.? All suggestions are welcome!
