In case you don't know it, FM is different from the other modes in that it has fixed BW-Filter combinations. Filter #1 - 15000, #2 - 10000, #3 - 7000. If you try to change the FM filter BW it will only show the three widths and will change the filter number to which ever filter will give you that BW.
toggle quoted message
Show quoted text
Phil,
I see no issue here on my 7300 with the latest Alpha of flrig.
The filters remember their last setting per mode so set your filter width to what you want and then if you don't change it, it should come back the next time you use that filter in that mode. It does here anyway.
On Apr 4, 2024, at 09:37, Philip Rose, GM3ZZA via <
gm3zza@...> wrote:
What is the current state of filter handling for the IC-7300?
I was testing a different feature for CW on IC-7300 and I noticed that the filter width on the rig for filter3 had been changed from its default.
After some investigation I see that flrig does not change the filter width when I switch the filter on the IC-7300. If I switch mode on the IC-7300 then the current filter number and bandwidth is displayed correctly in flrig. It does not seem to restricted to CW, I see the same happening with other modes.
It works fine with my IC-705.
73 Phil
