Hope it helps. I also use a RPi.
On my 7300 I have the audio output set to 27% because I turn off the AGC to keep strong stations from dropping the gain. For AGC on then 50% usually is good. The 27& seems to work for both fldigi and Wsjtx on my 7300.
The power on a new fldigi install defaults to -12 which is way too low for me so I turn on the remembering by band & mode and set it to where I want it and it stays. The Pi doesn't this at all.
My understanding is that the S-Meter indication originates in Flrig so fldigi just repeats it. If you don't see it in flrig you won't see it in fldigi.
toggle quoted message
Show quoted text
On Dec 15, 2023, at 11:25, Bruce W4BRU <
w4bru@...> wrote:
Thanks, Cliff.
The required audio level difference between wsjt-x and fldigi is informative. We used "IC-7100 How-to" from?"" for setup. We can try modifying these suggested settings to increase the audio into the computer:
? ACC/USB AF Level - 50%
? ACC MOD Level - 20%
? USB MOD Level - 10%
The power settings in fldigi is new to me. I run my station from a Rasp Pi and I've never set anything. I don't really like Windows so when it doesn't work on a friend's computer, I blame Windows!
As to the S meter, it seems to me it worked the first time I set up flrig and then stopped working. I'll have to fiddle with it. Of all the issues, this is the least important. I just saw it as a potential symptom of flrig-fldigi interface failure.
