It's an odd module. All the pins of the LCC will have a pth connected to
the pad and then all the pads connected in two groups. Each of these
groups will connect to two surface mount pins that will be the pins of
the module.
So I would like to be able to add pth's that aren't pins. Is that possible?
Maybe numbering all the pads in one group '1' and all the pads in the
other group '2' is the right way to handle it.
What's the best solution?
Thanks,
David
toggle quoted message
Show quoted text
On 7/2/2012 6:16 PM, Andy Eskelson wrote:
Are you trying to create a module that will suit different components?
i.e.
pad--pth--pth--pth
or pad--pad--pad--pth
if so then just a standard pth pad as needed. Tweak the size if need be.
Pads with the same number will show up as all connected together in
pcbnew.
Andy
On Mon, 02 Jul 2012 17:48:51 -0400
David Novak <david.novak@...> wrote:
I have a need to create a 68 pin LCC module with every pad connected to
a plated through hole. Multiple pads will connect together and form 4
different part pins. In other words, I need to include plated through
holes in my module that aren't pins.
What is the best way to make this happen?
Thanks,
David
------------------------------------
Please read the Kicad FAQ in the group files section before posting your question.
Please post your bug reports here. They will be picked up by the creator of Kicad.
Please visit for details of how to contribute your symbols/modules to the kicad library.
For building Kicad from source and other development questions visit the kicad-devel group at ! Groups Links
------------------------------------
Please read the Kicad FAQ in the group files section before posting your question.
Please post your bug reports here. They will be picked up by the creator of Kicad.
Please visit for details of how to contribute your symbols/modules to the kicad library.
For building Kicad from source and other development questions visit the kicad-devel group at ! Groups Links
