Re: [hammond_zone] my soon new rig
|
To keep these old original posts going you can drill a small hole that will allow the insertion of a fine spray nosel. Deoxit F5 is by far the best product.? Once you have a hole, you can spray it each time you oil your instrument.?
The output of the reverb amplifier is at most 10 watts, and
that's the peak power it would deliver to the reverb speaker when
turned right up. As you turn the reverb down, more resistance is
placed in series with the speaker, reducing the output of the amp
as it will be feeding a higher impedance, and reducing the
proportion of the amplifier output that is fed to the speaker.
Duty cycle would be a factor as well the average power dissipated
by the pot will me much lower than the maximum amplifier output. I
doubt that there is physically room for a larger higher rated pot
underneath the panel as well.
On 22/04/2022 16:32, Steven Mason via
wrote:
That is what I thought.? I applied a very liberal amount around
the exterior and spindle and was able to get a little improvement
- no more lightening and thunder when I tap it - but its still
scratchy.? I guess I will have to search for some kind of
replacement.??? But only 5 watts?
|
