Re: Logger32 Stay Minimized
Hi Rich, ? You have to go in the INI file and change the values of the windows position. Sorry i¡¯m not on the RADIO PC and can¡¯t tell you where they are. Bob will be better and faster than me on where they are. ? 73 Olivier F4FQH ? ? I must have accidently changed a setting.? In the past I was able to have L32 running in background while performing other tasks with windows32.? Now when I try if L32 starts a contact it takes over screen while I was trying to do some other tasks with Widows 11.
|
Re: Stupid question - how to open search pane?
On Sat, Nov 2, 2024 at 05:21 PM, Paul F6EXV wrote:
Hii all
I do not have a search window, and I do not have it after following section 6.9 of the help file.
I cannot find that menuy anywhere.
Help please !
I want to search for all 13cm (satellite) QSOs, as I supposedly have about 150 QSO, and only 6 countries show as worked. I know I have quite a few more. Of course I have recalculated statistics....
That statistic is wrong
73
Paul F6EXV
Right click on the Logbook Page?Window. Click the SEARCH FOR QSO menu option. If you do not see the Search Window, look at section 6.9 (page 180) of the help file. SeventyThree(s).
?
Paul,
?
Do you get the search window by right clicking on the log window and selecting the fourth option...
?
?
?
That should give you the "Search Window". Here's a sample for looking for 15 meter QSOs.
?
?
?
--
Gerald, VE1DT
|
Re: Stupid question - how to open search pane?
If the search window?is open, you will see on the list, like this. If you don't see it on the list, the window is not open. SeventyThree(s).
?
On 11/02/2024 4:21 PM EDT Paul F6EXV <f6exv@...> wrote:
?
?
Hii all
I do not have a search window, and I do not have it after following section 6.9 of the help file.
I cannot find that menuy anywhere.
Help please !
I want to search for all 13cm (satellite) QSOs, as I supposedly have about 150 QSO, and only 6 countries show as worked. I know I have quite a few more. Of course I have recalculated statistics....
That statistic is wrong
73
Paul F6EXV
?
Right click on the Logbook Page?Window. Click the SEARCH FOR QSO menu option. If you do not see the Search Window, look at section 6.9 (page 180) of the help file. SeventyThree(s).
On 10/28/2024 6:09 AM EDT gett <omvvardar@...> wrote:
?
?
Sorry for my ignorance, but I can't find how to open search pane, when I want to search for callsign?
|
Re: Stupid question - how to open search pane?
Hii all
I do not have a search window, and I do not have it after following section 6.9 of the help file.
I cannot find that menuy anywhere.
Help please !
I want to search for all 13cm (satellite) QSOs, as I supposedly have about 150 QSO, and only 6 countries show as worked. I know I have quite a few more. Of course I have recalculated statistics....
That statistic is wrong
73
Paul F6EXV
Right click on the Logbook Page?Window. Click the SEARCH FOR QSO menu option. If you do not see the Search Window, look at section 6.9 (page 180) of the help file. SeventyThree(s).
toggle quoted message
Show quoted text
On 10/28/2024 6:09 AM EDT gett <omvvardar@...> wrote:
?
?
Sorry for my ignorance, but I can't find how to open search pane, when I want to search for callsign?
|
I must have accidently changed a setting.? In the past I was able to have L32 running in background while performing other tasks with windows32.? Now when I try if L32 starts a contact it takes over screen while I was trying to do some other tasks with Widows 11.
|
... or click button #11 on the toolbar. Or type Ctrl+N in the Logbook Entry Window.
SeventyThree(s)
On 11/02/2024 7:55 AM EDT Jan <hamlogger@...> wrote:
?
?
Ofcourse there is.
On upper status bar
Goto View
Click show notes window
73
Jan PA4JJ
Op 2-11-2024 om 12:45 schreef David KN2M via groups.io:
Is there a location to write and store notes within L32??? Kind of like L32-Notepad?? Probably not.? Just use Notepad but I think it would be nice to be able to drop my own notes here and there because the Help is so long.
--
____________________________________________________
my dxspider clusters running on a raspberry pi:
pa4jj-2 77.174.195.163 port 7300
pa4jj-3 77.174.195.163 port 7388
|
Also, assuming you are using a PDFreader, you can type "Notes"
into the search box and it will probably take you to the page
stated by Bob.
A little research and the use of common sense does wonders.
73
Colin, G3PSM
On 02/11/2024 12:30, Bob via groups.io
wrote:
toggle quoted message
Show quoted text
There is
an entire section in the help file (starting on page 163)
dedicated to the subject.
SeventyThree(s).
On 11/02/2024 7:45 AM EDT David KN2M via groups.io
<rodman@...> wrote: ?
?
Is there a location to write and store notes within L32???
Kind of like L32-Notepad?? Probably not.? Just use Notepad but
I think it would be nice to be able to drop my own notes here
and there because the Help is so long.
|
There is an entire section in the help file (starting on page 163) dedicated to the subject.
SeventyThree(s).
On 11/02/2024 7:45 AM EDT David KN2M via groups.io <rodman@...> wrote:
?
?
Is there a location to write and store notes within L32??? Kind of like L32-Notepad?? Probably not.? Just use Notepad but I think it would be nice to be able to drop my own notes here and there because the Help is so long.
|
Ofcourse there is.
On upper status bar
Goto View
Click show notes window
73
Jan PA4JJ
Op 2-11-2024 om 12:45 schreef David
KN2M via groups.io:
Is there a location to write and store notes within L32???
Kind of like L32-Notepad?? Probably not.? Just use Notepad but I
think it would be nice to be able to drop my own notes here and
there because the Help is so long.
--
____________________________________________________
my dxspider clusters running on a raspberry pi:
pa4jj-2 77.174.195.163 port 7300
pa4jj-3 77.174.195.163 port 7388
|
Is there a location to write and store notes within L32??? Kind of like L32-Notepad?? Probably not.? Just use Notepad but I think it would be nice to be able to drop my own notes here and there because the Help is so long.
|
Re: QSO by bands in the Previous QSOs window
Done for the next update. SeventyThree(s).
?
?
Hi, it would be helpful to enable sorting QSOs by bands in the Previous
QSOs window. Useful when there are many QSOs with a station.
Sorting by date and by time does the same thing.
Thanks!
?
73?? Vytas?? LZ2VQ
?
?
?
|
Hi again Bob,
....Just send me the modified ADIF file that you changed the OPERATOR to be /P.... To put it clear: I have not changed the OPERATOR to be /P, if you mean the single file from the portable operation, as it was there correctly from the beginning. I have changed it in the complete exported log in adif and then loaded it in a new clean log where it loaded without /P again. It was that big adif I sent as a link to Google drive. If you cannot open it, shall I send it by another application?
Good news: I have operated portable today and the log has imported correctly with /P.
73, Ruda, OK2QA
?t 31. 10. 2024 v?22:36 odes¨ªlatel DIDIER DIENNE via <f5jvp= [email protected]> napsal:
------ Message d'origine ------
Date 31/10/2024 21:07:39
Objet Re: [hamlogger] Edit OPERATOR
I am not wondering that you do not believe me. I did not believe my eyes when I saw the stuff as well.
Attached there is the original file which was imported in the first step. I tried to attache the full adif logbook, but it is too big, myaybe the link would help. Well, I plan a short SOTA activation on two meters FM
tomorrow afternoon, typically yielding only a handful of QSOs.
Let me wait and see how it goes. 73, Ruda, OK2QA
... of course when you edited the operator <OPERATOR:5>OK2QA to be OK2QA/P you did change the 5 to 7. Oh well, SeventyThree(s)AndBackToGardening.
On 10/31/2024 2:02 PM EDT Bob < k4cy@...> wrote:
?
?
I don't believe you. If you successfully?imported an ADIF file with the OPERATOR as OK2QA/P. Those QSOs will be logged with OPERATOR as OK2QA/P. QSOs with no OPERATOR field will have been logged with OPERATOR as whoever has the logbook open. Maybe you have more luck in the garden? SeventyThree(s).
?
?
Hi,
I have similar problem.
After activating portable outdoors I always export the log from notebook with operator OK2QA/P and import it into the home PC. This is the way I used hundred times already and it always worked fine. But yesterday the affix /P was lost during the import. Manual correction one by one line was not feasible for the portable log of about 100 QSOs while correcting one record took approximately 60 seconds.
Okay. I duly made a backup, exported the whole log of 200 000 QSOs, deleted the relevant portion with missing /P and imported the clean rest into a new log. It takes time so that I can do some gardening in between. Finally I imported the relevant protion again, taking special care (checking that the OPERATOR was OK2QA/P indeed). The result was as wrong as before, /P missing.
Next step: Exported the complete log again, changed the OPERATOR from OK2QA to OK2QA/P in adif using Notepad (luckilly this can be done as bulk operation). Then I imported the corrected adif in a new logbook (more gardening) being sure it must go well this time. It went wrong again.
I am at the end of my wisdom. What irritates me most is that I used the procedure of translating my portable operation logs into the main log many times for many years without any problem until now.
Help?
73, Ruda, OK2QA
?
Tried similar way as Bob suggests proceeding as follows:
Here we go again ...
?
1) Backup your logbook
2) Look at the QSO number of the first QSO you imported with the wrong OPERATOR field.. For this example we will say it 123456
3) Export a partial logbook of QSO number 1 to QSO number 123455
4) Create a new/empty logbook
5) Import the file you made in step 3
6) Make a new backup
7) Promise yourself to ALWAYS make backups before importing files.
?
SeventyThree(s).
?
?
?
Good morning
?
I forgot to change OPERATOR before importing to Logger32.
Now, I would like to edit OPERATOR from PY5WRTC to PY2NY
but seems to me that the only way is one by one...
Is there a way to change all?PY5WRTC to PY2NY at same time?
Thanks again
?
.
..
...
--------------------------------
PY2NY / SP9NY / V26NY? - Vitor Luis Aidar dos Santos
?
?
?
?
|
OK Dider I am glad to know it works.
On 2024-11-01 ½ðê×ÈÕ 21:56:48, DIDIER DIENNE via groups.io <f5jvp@...> wrote: AKI,
Thanks to my friend Yves, I have just found the solution to my problem... my TQSL was not up to date and was on a very old version .. I just did the update and everything works fine..
I thank you AKI for looking at my problem. I apologize to you for having made you look for nothing I wish you a good day. F5JVP Didier
------ Message d'origine ------
Date 01/11/2024 12:23:17
Objet Re: [hamlogger] Hawaii
Didier I think It does not cause your problem.
Go to here to get the latest version.
https://www.n2amg.com/software/l32-logsync/
On 2024-11-01 ½ðê×ÈÕ 20:18:39, DIDIER DIENNE via groups.io <f5jvp@...> wrote: My version is:?2.0.19 So I'll try to find the version?2.0.19.7
NOTA the L32Logsync folder is at home under C:\
?like? ? ? c:\L32Logsync
and not under c:\logger32
like c:\logger32\L32Logsync
Does it matter?
Thank you very much Didier
------ Message d'origine ------
Date 01/11/2024 12:01:29
Objet Re: [hamlogger] Hawaii
Dider I think you said "it does not work"
If so, what is version of LogSync ? I am testing this with ver2.0.19.7 and everything works as expected.
On 2024-11-01 ½ðê×ÈÕ 19:09:40, DIDIER DIENNE via groups.io <f5jvp@...> wrote: OK After restarting logger32 ila agree to create a LOTW export file (with 1 single record) We can see: that he didn't put a check mark in front of him?""SEND LOTW FILE"" and of course not in front of ""LOTW QSL SENT""
------ Message d'origine ------
Date 01/11/2024 10:29:58
Objet Re: [hamlogger] Hawaii
OK Next test Run LogSync again. Uncheck Auto upload.... Try to click Create LoTW export file....
Does this work ?
On 2024-11-01 ½ðê×ÈÕ 18:23:44, DIDIER DIENNE via groups.io <f5jvp@...> wrote: Bonjour AKI,
je viens de faire exactement ce que vous m'avez indiqu¨¦ ... cela fonction bien ...
on ""SEND LOTW QSL""???the check mark is well removed? and on """LOTW QSL SENT ""?The check mark is present?
thank you AKI for your help
F5JVP Didier
------ Message d'origine ------
Date 01/11/2024 10:04:08
Objet Re: [hamlogger] Hawaii
Didier
I think you are using LogSync utility to upload to LoTW. If so, stop LogSync utility temporally. In Logger32 main menu, Click File/Export files/Export LoTW file. When you have this window, click Yes.
Do you see LoTW QSL Send is unchecked and LoTW QSL Sent is checked ?
On 2024-11-01 ½ðê×ÈÕ 17:45:59, DIDIER DIENNE via groups.io <f5jvp@...> wrote: Hello
Maybe I can give you more explanation, to understand where the problem is....
See below for an example.
I use LOTW with LOGGER32.
F5JVP Didier DIENNE wINDOW 11 Version 23H2 Tqsl Verstion V2.3.1 PC I7-11700 32GO 64Bits
In the logger32 settings, I indicated that I wanted to? ? ? - automatic? download (this works normally) and that? ? ? -I wanted the flags after loading (? it doesn't work )
Sample:
my QSO? in Logger32
configurtion de Logger32: auto Upload and flag Logger32 after Upload
in fact we can see
The "  " sign placed in front of the 6th? should be removed and The "  " sign should be placed in front of the 9th line?
exactly like the information from E-QSL
si l'on regarde LOTW
we can see that LOTW did record the QSO but did not give the order to modify the?  ?in logger32
With thanks F5JVP Didier
------ Message d'origine ------
Date 01/11/2024 05:58:46
Objet Re: [hamlogger] Hawaii
I have not figured that one out yet. Need more time to try and
see whats going on..
73 Rick N2AMG
On 10/31/2024 5:36 PM, DIDIER DIENNE
wrote:
why are my QSOs not flagged on?''''confirmation
envoy¨¦e avec Lotw''''
MERCI
------ Message d'origine ------
Date 31/10/2024 22:30:49
Objet Re: [hamlogger] Hawaii
Understood. There is
abundant evidence that the station is/was in Hawaii - CQ
Zone, Continent, and Prefix. I'm still narrowing down the
possibilities as to why Logger32 rejected HI as the STATE
for a station in Hawaii. What Country it was logged as is
one of them. SeventyThree(s).
?
?
When N1MM exports qso's the DXCC field is never
included.? N1MM figures where ever it is imported to will
figure it out..
73 Rick n2AMG
On 10/31/2024 5:17 PM, Bob via
groups.io wrote:
I notice there is
no DXCC field in the ADIF record. Is the QSO logged
with the DXCC of 291 or 110? SeventyThree(s).
?
?
Bob, good
evening...
I am very sorry, was my mistake about deleting
BAD.adi file.
Of course I could show you, really, I have no
problems with?
public logs (I
am finally doing LoTW today, for the first time
).
I am trying to
recover from?"deleted files".
?
Logger32 (Version
4.0) ADIF file import exception(s).
Source file - c:\users\py2ny - vitor\documents\adif
corrigido.adi
Created 31 out 24, 11:20:16
Operator - PY2NY
<EOH>
Error in the STATE field: ?<CALL:5>KH6KW
<QSO_DATE:8>20231210 <TIME_ON:6>233226
<TIME_OFF:6>233226 <STATE:2>HI
<BAND:3>10M <STATION_CALLSIGN:5>PY2NY
<FREQ:7>28.4073 <CONTEST_ID:7>ARRL-10
<FREQ_RX:8>28.40730 <MODE:3>SSB
<RST_RCVD:2>59 <RST_SENT:2>59
<TX_PWR:3>100 <OPERATOR:5>PY2NY
<CQZ:2>31 <STX:4>1276
<APP_N1MM_POINTS:1>0
<APP_N1MM_RADIO_NR:1>1
<APP_N1MM_CONTINENT:2>OC
<APP_N1MM_RUN1RUN2:1>1
<APP_N1MM_RADIOINTERFACED:1>1
<APP_N1MM_ISORIGINAL:4>True
<APP_N1MM_NETBIOSNAME:15>DESKTOP-EJIUMTF
<APP_N1MM_ISRUNQSO:1>1 <PFX:3>KH6
<APP_N1MM_MULT1:1>0 <APP_N1MM_MULT2:1>0
<APP_N1MM_MULT3:1>0
<APP_N1MM_ID:32>d4a8bdafe4ad4040996209df04571af2
<APP_N1MM_CLAIMEDQSO:1>1
<APP_N1MM_CONTACTTYPE:1>D <EOR>
.
..
...
--------------------------------
PY2NY / SP9NY / V26NY? - Vitor Luis
Aidar dos Santos
?
If you
won't show me the ADIF record for the KH6KW
contact, will you at least tell me what the
DXCC field was? SeventyThree(s).
?
?
Thanks
Bob
I got BAD file,
made STATE blank for HI?(KH6KW) from the
file, and changed XE2X
TAM province to
TMS. That was enough to import those missed
3 QSOs into my
Logger32.
Now, I am just
preparing another message about "EDIT"
function.
Thanks a thousand
times. [ Vitor ]
.
..
...
--------------------------------
PY2NY / SP9NY / V26NY? -
Vitor Luis Aidar dos Santos
?
If the QSO was not imported correctly,
the ADIF record will be in the BAD.ADI
file. Please copy/past the record here.
SeventyThree(s).
?
?
Good
morning
I did my research
in the logger32 archive and even the
1000 pages
manual. Can't
import STATE [HI] from ADIF
generated by N1MM.
I solved?problem
with NF changing to NL. But what to
do with
Hawaii?
Thanks...
.
..
...
--------------------------------
PY2NY / SP9NY /
V26NY? - Vitor Luis
Aidar dos Santos
?
?
?
?
?
?
|
AKI,
Thanks to my friend Yves, I have just found the solution to my problem... my TQSL was not up to date and was on a very old version .. I just did the update and everything works fine..
I thank you AKI for looking at my problem. I apologize to you for having made you look for nothing I wish you a good day. F5JVP Didier
------ Message d'origine ------
Date 01/11/2024 12:23:17
Objet Re: [hamlogger] Hawaii
Didier I think It does not cause your problem.
Go to here to get the latest version.
https://www.n2amg.com/software/l32-logsync/
On 2024-11-01 ½ðê×ÈÕ 20:18:39, DIDIER DIENNE via groups.io <f5jvp@...> wrote: My version is:?2.0.19 So I'll try to find the version?2.0.19.7
NOTA the L32Logsync folder is at home under C:\
?like? ? ? c:\L32Logsync
and not under c:\logger32
like c:\logger32\L32Logsync
Does it matter?
Thank you very much Didier
------ Message d'origine ------
Date 01/11/2024 12:01:29
Objet Re: [hamlogger] Hawaii
Dider I think you said "it does not work"
If so, what is version of LogSync ? I am testing this with ver2.0.19.7 and everything works as expected.
On 2024-11-01 ½ðê×ÈÕ 19:09:40, DIDIER DIENNE via groups.io <f5jvp@...> wrote: OK After restarting logger32 ila agree to create a LOTW export file (with 1 single record) We can see: that he didn't put a check mark in front of him?""SEND LOTW FILE"" and of course not in front of ""LOTW QSL SENT""
------ Message d'origine ------
Date 01/11/2024 10:29:58
Objet Re: [hamlogger] Hawaii
OK Next test Run LogSync again. Uncheck Auto upload.... Try to click Create LoTW export file....
Does this work ?
On 2024-11-01 ½ðê×ÈÕ 18:23:44, DIDIER DIENNE via groups.io <f5jvp@...> wrote: Bonjour AKI,
je viens de faire exactement ce que vous m'avez indiqu¨¦ ... cela fonction bien ...
on ""SEND LOTW QSL""???the check mark is well removed? and on """LOTW QSL SENT ""?The check mark is present?
thank you AKI for your help
F5JVP Didier
------ Message d'origine ------
Date 01/11/2024 10:04:08
Objet Re: [hamlogger] Hawaii
Didier
I think you are using LogSync utility to upload to LoTW. If so, stop LogSync utility temporally. In Logger32 main menu, Click File/Export files/Export LoTW file. When you have this window, click Yes.
Do you see LoTW QSL Send is unchecked and LoTW QSL Sent is checked ?
On 2024-11-01 ½ðê×ÈÕ 17:45:59, DIDIER DIENNE via groups.io <f5jvp@...> wrote: Hello
Maybe I can give you more explanation, to understand where the problem is....
See below for an example.
I use LOTW with LOGGER32.
F5JVP Didier DIENNE wINDOW 11 Version 23H2 Tqsl Verstion V2.3.1 PC I7-11700 32GO 64Bits
In the logger32 settings, I indicated that I wanted to? ? ? - automatic? download (this works normally) and that? ? ? -I wanted the flags after loading (? it doesn't work )
Sample:
my QSO? in Logger32
configurtion de Logger32: auto Upload and flag Logger32 after Upload
in fact we can see
The "  " sign placed in front of the 6th? should be removed and The "  " sign should be placed in front of the 9th line?
exactly like the information from E-QSL
si l'on regarde LOTW
we can see that LOTW did record the QSO but did not give the order to modify the?  ?in logger32
With thanks F5JVP Didier
------ Message d'origine ------
Date 01/11/2024 05:58:46
Objet Re: [hamlogger] Hawaii
I have not figured that one out yet. Need more time to try and
see whats going on..
73 Rick N2AMG
On 10/31/2024 5:36 PM, DIDIER DIENNE
wrote:
why are my QSOs not flagged on?''''confirmation
envoy¨¦e avec Lotw''''
MERCI
------ Message d'origine ------
Date 31/10/2024 22:30:49
Objet Re: [hamlogger] Hawaii
Understood. There is
abundant evidence that the station is/was in Hawaii - CQ
Zone, Continent, and Prefix. I'm still narrowing down the
possibilities as to why Logger32 rejected HI as the STATE
for a station in Hawaii. What Country it was logged as is
one of them. SeventyThree(s).
?
?
When N1MM exports qso's the DXCC field is never
included.? N1MM figures where ever it is imported to will
figure it out..
73 Rick n2AMG
On 10/31/2024 5:17 PM, Bob via
groups.io wrote:
I notice there is
no DXCC field in the ADIF record. Is the QSO logged
with the DXCC of 291 or 110? SeventyThree(s).
?
?
Bob, good
evening...
I am very sorry, was my mistake about deleting
BAD.adi file.
Of course I could show you, really, I have no
problems with?
public logs (I
am finally doing LoTW today, for the first time
).
I am trying to
recover from?"deleted files".
?
Logger32 (Version
4.0) ADIF file import exception(s).
Source file - c:\users\py2ny - vitor\documents\adif
corrigido.adi
Created 31 out 24, 11:20:16
Operator - PY2NY
<EOH>
Error in the STATE field: ?<CALL:5>KH6KW
<QSO_DATE:8>20231210 <TIME_ON:6>233226
<TIME_OFF:6>233226 <STATE:2>HI
<BAND:3>10M <STATION_CALLSIGN:5>PY2NY
<FREQ:7>28.4073 <CONTEST_ID:7>ARRL-10
<FREQ_RX:8>28.40730 <MODE:3>SSB
<RST_RCVD:2>59 <RST_SENT:2>59
<TX_PWR:3>100 <OPERATOR:5>PY2NY
<CQZ:2>31 <STX:4>1276
<APP_N1MM_POINTS:1>0
<APP_N1MM_RADIO_NR:1>1
<APP_N1MM_CONTINENT:2>OC
<APP_N1MM_RUN1RUN2:1>1
<APP_N1MM_RADIOINTERFACED:1>1
<APP_N1MM_ISORIGINAL:4>True
<APP_N1MM_NETBIOSNAME:15>DESKTOP-EJIUMTF
<APP_N1MM_ISRUNQSO:1>1 <PFX:3>KH6
<APP_N1MM_MULT1:1>0 <APP_N1MM_MULT2:1>0
<APP_N1MM_MULT3:1>0
<APP_N1MM_ID:32>d4a8bdafe4ad4040996209df04571af2
<APP_N1MM_CLAIMEDQSO:1>1
<APP_N1MM_CONTACTTYPE:1>D <EOR>
.
..
...
--------------------------------
PY2NY / SP9NY / V26NY? - Vitor Luis
Aidar dos Santos
?
If you
won't show me the ADIF record for the KH6KW
contact, will you at least tell me what the
DXCC field was? SeventyThree(s).
?
?
Thanks
Bob
I got BAD file,
made STATE blank for HI?(KH6KW) from the
file, and changed XE2X
TAM province to
TMS. That was enough to import those missed
3 QSOs into my
Logger32.
Now, I am just
preparing another message about "EDIT"
function.
Thanks a thousand
times. [ Vitor ]
.
..
...
--------------------------------
PY2NY / SP9NY / V26NY? -
Vitor Luis Aidar dos Santos
?
If the QSO was not imported correctly,
the ADIF record will be in the BAD.ADI
file. Please copy/past the record here.
SeventyThree(s).
?
?
Good
morning
I did my research
in the logger32 archive and even the
1000 pages
manual. Can't
import STATE [HI] from ADIF
generated by N1MM.
I solved?problem
with NF changing to NL. But what to
do with
Hawaii?
Thanks...
.
..
...
--------------------------------
PY2NY / SP9NY /
V26NY? - Vitor Luis
Aidar dos Santos
?
?
?
?
?
?
|
As expected, the ADIF record for KH6KW imports correctly with the DXCC set to 110 and the STATE to HI.
?
Is it possible that you have modified the WAS award to include the imaginary STATE of DC, and somehow not included the Country of Hawaii as one of the three Countries for the award?
?
I suspect your problem is self inflicted injury. SeventyThree(s).
?
PS. And, your problem with NF/NL and TAM/TMS could be corrected automatically using the FauxSTATE database.
?
?
On 10/31/2024 5:04 PM EDT PY2NY <py2ny.vitor@...> wrote:
?
?
Bob, good evening...
I am very sorry, was my mistake about deleting BAD.adi file.
Of course I could show you, really, I have no problems with?
public logs (I am finally doing LoTW today, for the first time).
I am trying to recover from?"deleted files".
?
Logger32 (Version 4.0) ADIF file import exception(s).
Source file - c:\users\py2ny - vitor\documents\adif corrigido.adi
Created 31 out 24, 11:20:16
Operator - PY2NY
<EOH>
Error in the STATE field: ?<CALL:5>KH6KW <QSO_DATE:8>20231210 <TIME_ON:6>233226 <TIME_OFF:6>233226 <STATE:2>HI <BAND:3>10M <STATION_CALLSIGN:5>PY2NY <FREQ:7>28.4073 <CONTEST_ID:7>ARRL-10 <FREQ_RX:8>28.40730 <MODE:3>SSB <RST_RCVD:2>59 <RST_SENT:2>59 <TX_PWR:3>100 <OPERATOR:5>PY2NY <CQZ:2>31 <STX:4>1276 <APP_N1MM_POINTS:1>0 <APP_N1MM_RADIO_NR:1>1 <APP_N1MM_CONTINENT:2>OC <APP_N1MM_RUN1RUN2:1>1 <APP_N1MM_RADIOINTERFACED:1>1 <APP_N1MM_ISORIGINAL:4>True <APP_N1MM_NETBIOSNAME:15>DESKTOP-EJIUMTF <APP_N1MM_ISRUNQSO:1>1 <PFX:3>KH6 <APP_N1MM_MULT1:1>0 <APP_N1MM_MULT2:1>0 <APP_N1MM_MULT3:1>0 <APP_N1MM_ID:32>d4a8bdafe4ad4040996209df04571af2 <APP_N1MM_CLAIMEDQSO:1>1 <APP_N1MM_CONTACTTYPE:1>D <EOR>
.
..
...
--------------------------------
PY2NY / SP9NY / V26NY? - Vitor Luis Aidar dos Santos
?
If you won't show me the ADIF record for the KH6KW contact, will you at least tell me what the DXCC field was? SeventyThree(s).
?
?
Thanks Bob
I got BAD file, made STATE blank for HI?(KH6KW) from the file, and changed XE2X
TAM province to TMS. That was enough to import those missed 3 QSOs into my
Logger32.
Now, I am just preparing another message about "EDIT" function.
Thanks a thousand times. [ Vitor ]
.
..
...
--------------------------------
PY2NY / SP9NY / V26NY? - Vitor Luis Aidar dos Santos
?
If the QSO was not imported correctly, the ADIF record will be in the BAD.ADI file. Please copy/past the record here. SeventyThree(s).
?
?
Good morning
I did my research in the logger32 archive and even the 1000 pages
manual. Can't import STATE [HI] from ADIF generated by N1MM.
I solved?problem with NF changing to NL. But what to do with
Hawaii?
Thanks...
.
..
...
--------------------------------
PY2NY / SP9NY / V26NY? - Vitor Luis Aidar dos Santos
?
?
?
?
?
?
|
Didier I think It does not cause your problem.
Go to here to get the latest version.
https://www.n2amg.com/software/l32-logsync/
On 2024-11-01 ½ðê×ÈÕ 20:18:39, DIDIER DIENNE via groups.io <f5jvp@...> wrote: My version is:?2.0.19 So I'll try to find the version?2.0.19.7
NOTA the L32Logsync folder is at home under C:\
?like? ? ? c:\L32Logsync
and not under c:\logger32
like c:\logger32\L32Logsync
Does it matter?
Thank you very much Didier
------ Message d'origine ------
Date 01/11/2024 12:01:29
Objet Re: [hamlogger] Hawaii
Dider I think you said "it does not work"
If so, what is version of LogSync ? I am testing this with ver2.0.19.7 and everything works as expected.
On 2024-11-01 ½ðê×ÈÕ 19:09:40, DIDIER DIENNE via groups.io <f5jvp@...> wrote: OK After restarting logger32 ila agree to create a LOTW export file (with 1 single record) We can see: that he didn't put a check mark in front of him?""SEND LOTW FILE"" and of course not in front of ""LOTW QSL SENT""
------ Message d'origine ------
Date 01/11/2024 10:29:58
Objet Re: [hamlogger] Hawaii
OK Next test Run LogSync again. Uncheck Auto upload.... Try to click Create LoTW export file....
Does this work ?
On 2024-11-01 ½ðê×ÈÕ 18:23:44, DIDIER DIENNE via groups.io <f5jvp@...> wrote: Bonjour AKI,
je viens de faire exactement ce que vous m'avez indiqu¨¦ ... cela fonction bien ...
on ""SEND LOTW QSL""???the check mark is well removed? and on """LOTW QSL SENT ""?The check mark is present?
thank you AKI for your help
F5JVP Didier
------ Message d'origine ------
Date 01/11/2024 10:04:08
Objet Re: [hamlogger] Hawaii
Didier
I think you are using LogSync utility to upload to LoTW. If so, stop LogSync utility temporally. In Logger32 main menu, Click File/Export files/Export LoTW file. When you have this window, click Yes.
Do you see LoTW QSL Send is unchecked and LoTW QSL Sent is checked ?
On 2024-11-01 ½ðê×ÈÕ 17:45:59, DIDIER DIENNE via groups.io <f5jvp@...> wrote: Hello
Maybe I can give you more explanation, to understand where the problem is....
See below for an example.
I use LOTW with LOGGER32.
F5JVP Didier DIENNE wINDOW 11 Version 23H2 Tqsl Verstion V2.3.1 PC I7-11700 32GO 64Bits
In the logger32 settings, I indicated that I wanted to? ? ? - automatic? download (this works normally) and that? ? ? -I wanted the flags after loading (? it doesn't work )
Sample:
my QSO? in Logger32
configurtion de Logger32: auto Upload and flag Logger32 after Upload
in fact we can see
The "  " sign placed in front of the 6th? should be removed and The "  " sign should be placed in front of the 9th line?
exactly like the information from E-QSL
si l'on regarde LOTW
we can see that LOTW did record the QSO but did not give the order to modify the?  ?in logger32
With thanks F5JVP Didier
------ Message d'origine ------
Date 01/11/2024 05:58:46
Objet Re: [hamlogger] Hawaii
I have not figured that one out yet. Need more time to try and
see whats going on..
73 Rick N2AMG
On 10/31/2024 5:36 PM, DIDIER DIENNE
wrote:
why are my QSOs not flagged on?''''confirmation
envoy¨¦e avec Lotw''''
MERCI
------ Message d'origine ------
Date 31/10/2024 22:30:49
Objet Re: [hamlogger] Hawaii
Understood. There is
abundant evidence that the station is/was in Hawaii - CQ
Zone, Continent, and Prefix. I'm still narrowing down the
possibilities as to why Logger32 rejected HI as the STATE
for a station in Hawaii. What Country it was logged as is
one of them. SeventyThree(s).
?
?
When N1MM exports qso's the DXCC field is never
included.? N1MM figures where ever it is imported to will
figure it out..
73 Rick n2AMG
On 10/31/2024 5:17 PM, Bob via
groups.io wrote:
I notice there is
no DXCC field in the ADIF record. Is the QSO logged
with the DXCC of 291 or 110? SeventyThree(s).
?
?
Bob, good
evening...
I am very sorry, was my mistake about deleting
BAD.adi file.
Of course I could show you, really, I have no
problems with?
public logs (I
am finally doing LoTW today, for the first time
).
I am trying to
recover from?"deleted files".
?
Logger32 (Version
4.0) ADIF file import exception(s).
Source file - c:\users\py2ny - vitor\documents\adif
corrigido.adi
Created 31 out 24, 11:20:16
Operator - PY2NY
<EOH>
Error in the STATE field: ?<CALL:5>KH6KW
<QSO_DATE:8>20231210 <TIME_ON:6>233226
<TIME_OFF:6>233226 <STATE:2>HI
<BAND:3>10M <STATION_CALLSIGN:5>PY2NY
<FREQ:7>28.4073 <CONTEST_ID:7>ARRL-10
<FREQ_RX:8>28.40730 <MODE:3>SSB
<RST_RCVD:2>59 <RST_SENT:2>59
<TX_PWR:3>100 <OPERATOR:5>PY2NY
<CQZ:2>31 <STX:4>1276
<APP_N1MM_POINTS:1>0
<APP_N1MM_RADIO_NR:1>1
<APP_N1MM_CONTINENT:2>OC
<APP_N1MM_RUN1RUN2:1>1
<APP_N1MM_RADIOINTERFACED:1>1
<APP_N1MM_ISORIGINAL:4>True
<APP_N1MM_NETBIOSNAME:15>DESKTOP-EJIUMTF
<APP_N1MM_ISRUNQSO:1>1 <PFX:3>KH6
<APP_N1MM_MULT1:1>0 <APP_N1MM_MULT2:1>0
<APP_N1MM_MULT3:1>0
<APP_N1MM_ID:32>d4a8bdafe4ad4040996209df04571af2
<APP_N1MM_CLAIMEDQSO:1>1
<APP_N1MM_CONTACTTYPE:1>D <EOR>
.
..
...
--------------------------------
PY2NY / SP9NY / V26NY? - Vitor Luis
Aidar dos Santos
?
If you
won't show me the ADIF record for the KH6KW
contact, will you at least tell me what the
DXCC field was? SeventyThree(s).
?
?
Thanks
Bob
I got BAD file,
made STATE blank for HI?(KH6KW) from the
file, and changed XE2X
TAM province to
TMS. That was enough to import those missed
3 QSOs into my
Logger32.
Now, I am just
preparing another message about "EDIT"
function.
Thanks a thousand
times. [ Vitor ]
.
..
...
--------------------------------
PY2NY / SP9NY / V26NY? -
Vitor Luis Aidar dos Santos
?
If the QSO was not imported correctly,
the ADIF record will be in the BAD.ADI
file. Please copy/past the record here.
SeventyThree(s).
?
?
Good
morning
I did my research
in the logger32 archive and even the
1000 pages
manual. Can't
import STATE [HI] from ADIF
generated by N1MM.
I solved?problem
with NF changing to NL. But what to
do with
Hawaii?
Thanks...
.
..
...
--------------------------------
PY2NY / SP9NY /
V26NY? - Vitor Luis
Aidar dos Santos
?
?
?
?
?
?
|
My version is:?2.0.19 So I'll try to find the version?2.0.19.7
NOTA the L32Logsync folder is at home under C:\
?like? ? ? c:\L32Logsync
and not under c:\logger32
like c:\logger32\L32Logsync
Does it matter?
Thank you very much Didier
------ Message d'origine ------
Date 01/11/2024 12:01:29
Objet Re: [hamlogger] Hawaii
Dider I think you said "it does not work"
If so, what is version of LogSync ? I am testing this with ver2.0.19.7 and everything works as expected.
On 2024-11-01 ½ðê×ÈÕ 19:09:40, DIDIER DIENNE via groups.io <f5jvp@...> wrote: OK After restarting logger32 ila agree to create a LOTW export file (with 1 single record) We can see: that he didn't put a check mark in front of him?""SEND LOTW FILE"" and of course not in front of ""LOTW QSL SENT""
------ Message d'origine ------
Date 01/11/2024 10:29:58
Objet Re: [hamlogger] Hawaii
OK Next test Run LogSync again. Uncheck Auto upload.... Try to click Create LoTW export file....
Does this work ?
On 2024-11-01 ½ðê×ÈÕ 18:23:44, DIDIER DIENNE via groups.io <f5jvp@...> wrote: Bonjour AKI,
je viens de faire exactement ce que vous m'avez indiqu¨¦ ... cela fonction bien ...
on ""SEND LOTW QSL""???the check mark is well removed? and on """LOTW QSL SENT ""?The check mark is present?
thank you AKI for your help
F5JVP Didier
------ Message d'origine ------
Date 01/11/2024 10:04:08
Objet Re: [hamlogger] Hawaii
Didier
I think you are using LogSync utility to upload to LoTW. If so, stop LogSync utility temporally. In Logger32 main menu, Click File/Export files/Export LoTW file. When you have this window, click Yes.
Do you see LoTW QSL Send is unchecked and LoTW QSL Sent is checked ?
On 2024-11-01 ½ðê×ÈÕ 17:45:59, DIDIER DIENNE via groups.io <f5jvp@...> wrote: Hello
Maybe I can give you more explanation, to understand where the problem is....
See below for an example.
I use LOTW with LOGGER32.
F5JVP Didier DIENNE wINDOW 11 Version 23H2 Tqsl Verstion V2.3.1 PC I7-11700 32GO 64Bits
In the logger32 settings, I indicated that I wanted to? ? ? - automatic? download (this works normally) and that? ? ? -I wanted the flags after loading (? it doesn't work )
Sample:
my QSO? in Logger32
configurtion de Logger32: auto Upload and flag Logger32 after Upload
in fact we can see
The "  " sign placed in front of the 6th? should be removed and The "  " sign should be placed in front of the 9th line?
exactly like the information from E-QSL
si l'on regarde LOTW
we can see that LOTW did record the QSO but did not give the order to modify the?  ?in logger32
With thanks F5JVP Didier
------ Message d'origine ------
Date 01/11/2024 05:58:46
Objet Re: [hamlogger] Hawaii
I have not figured that one out yet. Need more time to try and
see whats going on..
73 Rick N2AMG
On 10/31/2024 5:36 PM, DIDIER DIENNE
wrote:
why are my QSOs not flagged on?''''confirmation
envoy¨¦e avec Lotw''''
MERCI
------ Message d'origine ------
Date 31/10/2024 22:30:49
Objet Re: [hamlogger] Hawaii
Understood. There is
abundant evidence that the station is/was in Hawaii - CQ
Zone, Continent, and Prefix. I'm still narrowing down the
possibilities as to why Logger32 rejected HI as the STATE
for a station in Hawaii. What Country it was logged as is
one of them. SeventyThree(s).
?
?
When N1MM exports qso's the DXCC field is never
included.? N1MM figures where ever it is imported to will
figure it out..
73 Rick n2AMG
On 10/31/2024 5:17 PM, Bob via
groups.io wrote:
I notice there is
no DXCC field in the ADIF record. Is the QSO logged
with the DXCC of 291 or 110? SeventyThree(s).
?
?
Bob, good
evening...
I am very sorry, was my mistake about deleting
BAD.adi file.
Of course I could show you, really, I have no
problems with?
public logs (I
am finally doing LoTW today, for the first time
).
I am trying to
recover from?"deleted files".
?
Logger32 (Version
4.0) ADIF file import exception(s).
Source file - c:\users\py2ny - vitor\documents\adif
corrigido.adi
Created 31 out 24, 11:20:16
Operator - PY2NY
<EOH>
Error in the STATE field: ?<CALL:5>KH6KW
<QSO_DATE:8>20231210 <TIME_ON:6>233226
<TIME_OFF:6>233226 <STATE:2>HI
<BAND:3>10M <STATION_CALLSIGN:5>PY2NY
<FREQ:7>28.4073 <CONTEST_ID:7>ARRL-10
<FREQ_RX:8>28.40730 <MODE:3>SSB
<RST_RCVD:2>59 <RST_SENT:2>59
<TX_PWR:3>100 <OPERATOR:5>PY2NY
<CQZ:2>31 <STX:4>1276
<APP_N1MM_POINTS:1>0
<APP_N1MM_RADIO_NR:1>1
<APP_N1MM_CONTINENT:2>OC
<APP_N1MM_RUN1RUN2:1>1
<APP_N1MM_RADIOINTERFACED:1>1
<APP_N1MM_ISORIGINAL:4>True
<APP_N1MM_NETBIOSNAME:15>DESKTOP-EJIUMTF
<APP_N1MM_ISRUNQSO:1>1 <PFX:3>KH6
<APP_N1MM_MULT1:1>0 <APP_N1MM_MULT2:1>0
<APP_N1MM_MULT3:1>0
<APP_N1MM_ID:32>d4a8bdafe4ad4040996209df04571af2
<APP_N1MM_CLAIMEDQSO:1>1
<APP_N1MM_CONTACTTYPE:1>D <EOR>
.
..
...
--------------------------------
PY2NY / SP9NY / V26NY? - Vitor Luis
Aidar dos Santos
?
If you
won't show me the ADIF record for the KH6KW
contact, will you at least tell me what the
DXCC field was? SeventyThree(s).
?
?
Thanks
Bob
I got BAD file,
made STATE blank for HI?(KH6KW) from the
file, and changed XE2X
TAM province to
TMS. That was enough to import those missed
3 QSOs into my
Logger32.
Now, I am just
preparing another message about "EDIT"
function.
Thanks a thousand
times. [ Vitor ]
.
..
...
--------------------------------
PY2NY / SP9NY / V26NY? -
Vitor Luis Aidar dos Santos
?
If the QSO was not imported correctly,
the ADIF record will be in the BAD.ADI
file. Please copy/past the record here.
SeventyThree(s).
?
?
Good
morning
I did my research
in the logger32 archive and even the
1000 pages
manual. Can't
import STATE [HI] from ADIF
generated by N1MM.
I solved?problem
with NF changing to NL. But what to
do with
Hawaii?
Thanks...
.
..
...
--------------------------------
PY2NY / SP9NY /
V26NY? - Vitor Luis
Aidar dos Santos
?
?
?
?
?
?
|
Dider I think you said "it does not work"
If so, what is version of LogSync ? I am testing this with ver2.0.19.7 and everything works as expected.
On 2024-11-01 ½ðê×ÈÕ 19:09:40, DIDIER DIENNE via groups.io <f5jvp@...> wrote: OK After restarting logger32 ila agree to create a LOTW export file (with 1 single record) We can see: that he didn't put a check mark in front of him?""SEND LOTW FILE"" and of course not in front of ""LOTW QSL SENT""
------ Message d'origine ------
Date 01/11/2024 10:29:58
Objet Re: [hamlogger] Hawaii
OK Next test Run LogSync again. Uncheck Auto upload.... Try to click Create LoTW export file....
Does this work ?
On 2024-11-01 ½ðê×ÈÕ 18:23:44, DIDIER DIENNE via groups.io <f5jvp@...> wrote: Bonjour AKI,
je viens de faire exactement ce que vous m'avez indiqu¨¦ ... cela fonction bien ...
on ""SEND LOTW QSL""???the check mark is well removed? and on """LOTW QSL SENT ""?The check mark is present?
thank you AKI for your help
F5JVP Didier
------ Message d'origine ------
Date 01/11/2024 10:04:08
Objet Re: [hamlogger] Hawaii
Didier
I think you are using LogSync utility to upload to LoTW. If so, stop LogSync utility temporally. In Logger32 main menu, Click File/Export files/Export LoTW file. When you have this window, click Yes.
Do you see LoTW QSL Send is unchecked and LoTW QSL Sent is checked ?
On 2024-11-01 ½ðê×ÈÕ 17:45:59, DIDIER DIENNE via groups.io <f5jvp@...> wrote: Hello
Maybe I can give you more explanation, to understand where the problem is....
See below for an example.
I use LOTW with LOGGER32.
F5JVP Didier DIENNE wINDOW 11 Version 23H2 Tqsl Verstion V2.3.1 PC I7-11700 32GO 64Bits
In the logger32 settings, I indicated that I wanted to? ? ? - automatic? download (this works normally) and that? ? ? -I wanted the flags after loading (? it doesn't work )
Sample:
my QSO? in Logger32
configurtion de Logger32: auto Upload and flag Logger32 after Upload
in fact we can see
The "  " sign placed in front of the 6th? should be removed and The "  " sign should be placed in front of the 9th line?
exactly like the information from E-QSL
si l'on regarde LOTW
we can see that LOTW did record the QSO but did not give the order to modify the?  ?in logger32
With thanks F5JVP Didier
------ Message d'origine ------
Date 01/11/2024 05:58:46
Objet Re: [hamlogger] Hawaii
I have not figured that one out yet. Need more time to try and
see whats going on..
73 Rick N2AMG
On 10/31/2024 5:36 PM, DIDIER DIENNE
wrote:
why are my QSOs not flagged on?''''confirmation
envoy¨¦e avec Lotw''''
MERCI
------ Message d'origine ------
Date 31/10/2024 22:30:49
Objet Re: [hamlogger] Hawaii
Understood. There is
abundant evidence that the station is/was in Hawaii - CQ
Zone, Continent, and Prefix. I'm still narrowing down the
possibilities as to why Logger32 rejected HI as the STATE
for a station in Hawaii. What Country it was logged as is
one of them. SeventyThree(s).
?
?
When N1MM exports qso's the DXCC field is never
included.? N1MM figures where ever it is imported to will
figure it out..
73 Rick n2AMG
On 10/31/2024 5:17 PM, Bob via
groups.io wrote:
I notice there is
no DXCC field in the ADIF record. Is the QSO logged
with the DXCC of 291 or 110? SeventyThree(s).
?
?
Bob, good
evening...
I am very sorry, was my mistake about deleting
BAD.adi file.
Of course I could show you, really, I have no
problems with?
public logs (I
am finally doing LoTW today, for the first time
).
I am trying to
recover from?"deleted files".
?
Logger32 (Version
4.0) ADIF file import exception(s).
Source file - c:\users\py2ny - vitor\documents\adif
corrigido.adi
Created 31 out 24, 11:20:16
Operator - PY2NY
<EOH>
Error in the STATE field: ?<CALL:5>KH6KW
<QSO_DATE:8>20231210 <TIME_ON:6>233226
<TIME_OFF:6>233226 <STATE:2>HI
<BAND:3>10M <STATION_CALLSIGN:5>PY2NY
<FREQ:7>28.4073 <CONTEST_ID:7>ARRL-10
<FREQ_RX:8>28.40730 <MODE:3>SSB
<RST_RCVD:2>59 <RST_SENT:2>59
<TX_PWR:3>100 <OPERATOR:5>PY2NY
<CQZ:2>31 <STX:4>1276
<APP_N1MM_POINTS:1>0
<APP_N1MM_RADIO_NR:1>1
<APP_N1MM_CONTINENT:2>OC
<APP_N1MM_RUN1RUN2:1>1
<APP_N1MM_RADIOINTERFACED:1>1
<APP_N1MM_ISORIGINAL:4>True
<APP_N1MM_NETBIOSNAME:15>DESKTOP-EJIUMTF
<APP_N1MM_ISRUNQSO:1>1 <PFX:3>KH6
<APP_N1MM_MULT1:1>0 <APP_N1MM_MULT2:1>0
<APP_N1MM_MULT3:1>0
<APP_N1MM_ID:32>d4a8bdafe4ad4040996209df04571af2
<APP_N1MM_CLAIMEDQSO:1>1
<APP_N1MM_CONTACTTYPE:1>D <EOR>
.
..
...
--------------------------------
PY2NY / SP9NY / V26NY? - Vitor Luis
Aidar dos Santos
?
If you
won't show me the ADIF record for the KH6KW
contact, will you at least tell me what the
DXCC field was? SeventyThree(s).
?
?
Thanks
Bob
I got BAD file,
made STATE blank for HI?(KH6KW) from the
file, and changed XE2X
TAM province to
TMS. That was enough to import those missed
3 QSOs into my
Logger32.
Now, I am just
preparing another message about "EDIT"
function.
Thanks a thousand
times. [ Vitor ]
.
..
...
--------------------------------
PY2NY / SP9NY / V26NY? -
Vitor Luis Aidar dos Santos
?
If the QSO was not imported correctly,
the ADIF record will be in the BAD.ADI
file. Please copy/past the record here.
SeventyThree(s).
?
?
Good
morning
I did my research
in the logger32 archive and even the
1000 pages
manual. Can't
import STATE [HI] from ADIF
generated by N1MM.
I solved?problem
with NF changing to NL. But what to
do with
Hawaii?
Thanks...
.
..
...
--------------------------------
PY2NY / SP9NY /
V26NY? - Vitor Luis
Aidar dos Santos
?
?
?
?
?
?
|
OK After restarting logger32 ila agree to create a LOTW export file (with 1 single record) We can see: that he didn't put a check mark in front of him?""SEND LOTW FILE"" and of course not in front of ""LOTW QSL SENT""
------ Message d'origine ------
Date 01/11/2024 10:29:58
Objet Re: [hamlogger] Hawaii
OK Next test Run LogSync again. Uncheck Auto upload.... Try to click Create LoTW export file....
Does this work ?
On 2024-11-01 ½ðê×ÈÕ 18:23:44, DIDIER DIENNE via groups.io <f5jvp@...> wrote: Bonjour AKI,
je viens de faire exactement ce que vous m'avez indiqu¨¦ ... cela fonction bien ...
on ""SEND LOTW QSL""???the check mark is well removed? and on """LOTW QSL SENT ""?The check mark is present?
thank you AKI for your help
F5JVP Didier
------ Message d'origine ------
Date 01/11/2024 10:04:08
Objet Re: [hamlogger] Hawaii
Didier
I think you are using LogSync utility to upload to LoTW. If so, stop LogSync utility temporally. In Logger32 main menu, Click File/Export files/Export LoTW file. When you have this window, click Yes.
Do you see LoTW QSL Send is unchecked and LoTW QSL Sent is checked ?
On 2024-11-01 ½ðê×ÈÕ 17:45:59, DIDIER DIENNE via groups.io <f5jvp@...> wrote: Hello
Maybe I can give you more explanation, to understand where the problem is....
See below for an example.
I use LOTW with LOGGER32.
F5JVP Didier DIENNE wINDOW 11 Version 23H2 Tqsl Verstion V2.3.1 PC I7-11700 32GO 64Bits
In the logger32 settings, I indicated that I wanted to? ? ? - automatic? download (this works normally) and that? ? ? -I wanted the flags after loading (? it doesn't work )
Sample:
my QSO? in Logger32
configurtion de Logger32: auto Upload and flag Logger32 after Upload
in fact we can see
The "  " sign placed in front of the 6th? should be removed and The "  " sign should be placed in front of the 9th line?
exactly like the information from E-QSL
si l'on regarde LOTW
we can see that LOTW did record the QSO but did not give the order to modify the?  ?in logger32
With thanks F5JVP Didier
------ Message d'origine ------
Date 01/11/2024 05:58:46
Objet Re: [hamlogger] Hawaii
I have not figured that one out yet. Need more time to try and
see whats going on..
73 Rick N2AMG
On 10/31/2024 5:36 PM, DIDIER DIENNE
wrote:
why are my QSOs not flagged on?''''confirmation
envoy¨¦e avec Lotw''''
MERCI
------ Message d'origine ------
Date 31/10/2024 22:30:49
Objet Re: [hamlogger] Hawaii
Understood. There is
abundant evidence that the station is/was in Hawaii - CQ
Zone, Continent, and Prefix. I'm still narrowing down the
possibilities as to why Logger32 rejected HI as the STATE
for a station in Hawaii. What Country it was logged as is
one of them. SeventyThree(s).
?
?
When N1MM exports qso's the DXCC field is never
included.? N1MM figures where ever it is imported to will
figure it out..
73 Rick n2AMG
On 10/31/2024 5:17 PM, Bob via
groups.io wrote:
I notice there is
no DXCC field in the ADIF record. Is the QSO logged
with the DXCC of 291 or 110? SeventyThree(s).
?
?
Bob, good
evening...
I am very sorry, was my mistake about deleting
BAD.adi file.
Of course I could show you, really, I have no
problems with?
public logs (I
am finally doing LoTW today, for the first time
).
I am trying to
recover from?"deleted files".
?
Logger32 (Version
4.0) ADIF file import exception(s).
Source file - c:\users\py2ny - vitor\documents\adif
corrigido.adi
Created 31 out 24, 11:20:16
Operator - PY2NY
<EOH>
Error in the STATE field: ?<CALL:5>KH6KW
<QSO_DATE:8>20231210 <TIME_ON:6>233226
<TIME_OFF:6>233226 <STATE:2>HI
<BAND:3>10M <STATION_CALLSIGN:5>PY2NY
<FREQ:7>28.4073 <CONTEST_ID:7>ARRL-10
<FREQ_RX:8>28.40730 <MODE:3>SSB
<RST_RCVD:2>59 <RST_SENT:2>59
<TX_PWR:3>100 <OPERATOR:5>PY2NY
<CQZ:2>31 <STX:4>1276
<APP_N1MM_POINTS:1>0
<APP_N1MM_RADIO_NR:1>1
<APP_N1MM_CONTINENT:2>OC
<APP_N1MM_RUN1RUN2:1>1
<APP_N1MM_RADIOINTERFACED:1>1
<APP_N1MM_ISORIGINAL:4>True
<APP_N1MM_NETBIOSNAME:15>DESKTOP-EJIUMTF
<APP_N1MM_ISRUNQSO:1>1 <PFX:3>KH6
<APP_N1MM_MULT1:1>0 <APP_N1MM_MULT2:1>0
<APP_N1MM_MULT3:1>0
<APP_N1MM_ID:32>d4a8bdafe4ad4040996209df04571af2
<APP_N1MM_CLAIMEDQSO:1>1
<APP_N1MM_CONTACTTYPE:1>D <EOR>
.
..
...
--------------------------------
PY2NY / SP9NY / V26NY? - Vitor Luis
Aidar dos Santos
?
If you
won't show me the ADIF record for the KH6KW
contact, will you at least tell me what the
DXCC field was? SeventyThree(s).
?
?
Thanks
Bob
I got BAD file,
made STATE blank for HI?(KH6KW) from the
file, and changed XE2X
TAM province to
TMS. That was enough to import those missed
3 QSOs into my
Logger32.
Now, I am just
preparing another message about "EDIT"
function.
Thanks a thousand
times. [ Vitor ]
.
..
...
--------------------------------
PY2NY / SP9NY / V26NY? -
Vitor Luis Aidar dos Santos
?
If the QSO was not imported correctly,
the ADIF record will be in the BAD.ADI
file. Please copy/past the record here.
SeventyThree(s).
?
?
Good
morning
I did my research
in the logger32 archive and even the
1000 pages
manual. Can't
import STATE [HI] from ADIF
generated by N1MM.
I solved?problem
with NF changing to NL. But what to
do with
Hawaii?
Thanks...
.
..
...
--------------------------------
PY2NY / SP9NY /
V26NY? - Vitor Luis
Aidar dos Santos
?
?
?
?
?
?
|
OK Next test Run LogSync again. Uncheck Auto upload.... Try to click Create LoTW export file....
On 2024-11-01 ½ðê×ÈÕ 18:23:44, DIDIER DIENNE via groups.io <f5jvp@...> wrote: Bonjour AKI,
je viens de faire exactement ce que vous m'avez indiqu¨¦ ... cela fonction bien ...
on ""SEND LOTW QSL""???the check mark is well removed? and on """LOTW QSL SENT ""?The check mark is present?
thank you AKI for your help
F5JVP Didier
------ Message d'origine ------
Date 01/11/2024 10:04:08
Objet Re: [hamlogger] Hawaii
Didier
I think you are using LogSync utility to upload to LoTW. If so, stop LogSync utility temporally. In Logger32 main menu, Click File/Export files/Export LoTW file. When you have this window, click Yes.
Do you see LoTW QSL Send is unchecked and LoTW QSL Sent is checked ?
On 2024-11-01 ½ðê×ÈÕ 17:45:59, DIDIER DIENNE via groups.io <f5jvp@...> wrote: Hello
Maybe I can give you more explanation, to understand where the problem is....
See below for an example.
I use LOTW with LOGGER32.
F5JVP Didier DIENNE wINDOW 11 Version 23H2 Tqsl Verstion V2.3.1 PC I7-11700 32GO 64Bits
In the logger32 settings, I indicated that I wanted to? ? ? - automatic? download (this works normally) and that? ? ? -I wanted the flags after loading (? it doesn't work )
Sample:
my QSO? in Logger32
configurtion de Logger32: auto Upload and flag Logger32 after Upload
in fact we can see
The "  " sign placed in front of the 6th? should be removed and The "  " sign should be placed in front of the 9th line?
exactly like the information from E-QSL
si l'on regarde LOTW
we can see that LOTW did record the QSO but did not give the order to modify the?  ?in logger32
With thanks F5JVP Didier
------ Message d'origine ------
Date 01/11/2024 05:58:46
Objet Re: [hamlogger] Hawaii
I have not figured that one out yet. Need more time to try and
see whats going on..
73 Rick N2AMG
On 10/31/2024 5:36 PM, DIDIER DIENNE
wrote:
why are my QSOs not flagged on?''''confirmation
envoy¨¦e avec Lotw''''
MERCI
------ Message d'origine ------
Date 31/10/2024 22:30:49
Objet Re: [hamlogger] Hawaii
Understood. There is
abundant evidence that the station is/was in Hawaii - CQ
Zone, Continent, and Prefix. I'm still narrowing down the
possibilities as to why Logger32 rejected HI as the STATE
for a station in Hawaii. What Country it was logged as is
one of them. SeventyThree(s).
?
?
When N1MM exports qso's the DXCC field is never
included.? N1MM figures where ever it is imported to will
figure it out..
73 Rick n2AMG
On 10/31/2024 5:17 PM, Bob via
groups.io wrote:
I notice there is
no DXCC field in the ADIF record. Is the QSO logged
with the DXCC of 291 or 110? SeventyThree(s).
?
?
Bob, good
evening...
I am very sorry, was my mistake about deleting
BAD.adi file.
Of course I could show you, really, I have no
problems with?
public logs (I
am finally doing LoTW today, for the first time
).
I am trying to
recover from?"deleted files".
?
Logger32 (Version
4.0) ADIF file import exception(s).
Source file - c:\users\py2ny - vitor\documents\adif
corrigido.adi
Created 31 out 24, 11:20:16
Operator - PY2NY
<EOH>
Error in the STATE field: ?<CALL:5>KH6KW
<QSO_DATE:8>20231210 <TIME_ON:6>233226
<TIME_OFF:6>233226 <STATE:2>HI
<BAND:3>10M <STATION_CALLSIGN:5>PY2NY
<FREQ:7>28.4073 <CONTEST_ID:7>ARRL-10
<FREQ_RX:8>28.40730 <MODE:3>SSB
<RST_RCVD:2>59 <RST_SENT:2>59
<TX_PWR:3>100 <OPERATOR:5>PY2NY
<CQZ:2>31 <STX:4>1276
<APP_N1MM_POINTS:1>0
<APP_N1MM_RADIO_NR:1>1
<APP_N1MM_CONTINENT:2>OC
<APP_N1MM_RUN1RUN2:1>1
<APP_N1MM_RADIOINTERFACED:1>1
<APP_N1MM_ISORIGINAL:4>True
<APP_N1MM_NETBIOSNAME:15>DESKTOP-EJIUMTF
<APP_N1MM_ISRUNQSO:1>1 <PFX:3>KH6
<APP_N1MM_MULT1:1>0 <APP_N1MM_MULT2:1>0
<APP_N1MM_MULT3:1>0
<APP_N1MM_ID:32>d4a8bdafe4ad4040996209df04571af2
<APP_N1MM_CLAIMEDQSO:1>1
<APP_N1MM_CONTACTTYPE:1>D <EOR>
.
..
...
--------------------------------
PY2NY / SP9NY / V26NY? - Vitor Luis
Aidar dos Santos
?
If you
won't show me the ADIF record for the KH6KW
contact, will you at least tell me what the
DXCC field was? SeventyThree(s).
?
?
Thanks
Bob
I got BAD file,
made STATE blank for HI?(KH6KW) from the
file, and changed XE2X
TAM province to
TMS. That was enough to import those missed
3 QSOs into my
Logger32.
Now, I am just
preparing another message about "EDIT"
function.
Thanks a thousand
times. [ Vitor ]
.
..
...
--------------------------------
PY2NY / SP9NY / V26NY? -
Vitor Luis Aidar dos Santos
?
If the QSO was not imported correctly,
the ADIF record will be in the BAD.ADI
file. Please copy/past the record here.
SeventyThree(s).
?
?
Good
morning
I did my research
in the logger32 archive and even the
1000 pages
manual. Can't
import STATE [HI] from ADIF
generated by N1MM.
I solved?problem
with NF changing to NL. But what to
do with
Hawaii?
Thanks...
.
..
...
--------------------------------
PY2NY / SP9NY /
V26NY? - Vitor Luis
Aidar dos Santos
?
?
?
?
?
?
|
Gerald Boutin
Jan