|
|
You might want to experiment with changing the Regional settings on the PC to something other than standard Norway. SeventyThree(s).
On 05/10/2025 9:58 AM EDT Markku OH2BLV via groups.io <markku.vanonen@...> wrote:
?
?
I tried changing the time of the old QSO, it worked correctly. Then I opened the ADD QSO MANUALLY function, where the TIME was now correct. I opened the laptop and that also seemed to work correctly NOW. I am surprised. The computers are not connected to each other.
|
I tried changing the time of the old QSO, it worked correctly. Then I opened the ADD QSO MANUALLY function, where the TIME was now correct. I opened the laptop and that also seemed to work correctly NOW. I am surprised. The computers are not connected to each other.
|
I have tried all time formats with and without seconds. The problem seems to have started when the QSO time correction function was enabled.
?
|
What time format have you setup (click SETUP | TIME FORMAT), and are you setup for showing seconds or not? SeventyThree(s).
On 05/10/2025 4:53 AM EDT Markku OH2BLV via groups.io <markku.vanonen@...> wrote:
?
?
When I log new QSO, sometimes the log time becomes 00.00.00, even though the computer and logger clock (bottom left corner) show the correct time.
The same problem occurs in the TIME window (00,00,00) when I start " ADD QSOS MANUALLY".
Same problem on two different PCs.
What could be wrong?
|
|
|
|
|
Try right clicking on the call field in the log entry window then setup -> qso start time and check callsign field loses focus.
73, Frank GI4NKB
On Saturday, May 10, 2025 at 09:53:16 AM GMT+1, Markku OH2BLV via groups.io <markku.vanonen@...> wrote:
When I log new QSO, sometimes the log time becomes 00.00.00, even though the computer and logger clock (bottom left corner) show the correct time.
The same problem occurs in the TIME window (00,00,00) when I start " ADD QSOS MANUALLY".
Same problem on two different PCs.
What could be wrong?
|
When I log new QSO, sometimes the log time becomes 00.00.00, even though the computer and logger clock (bottom left corner) show the correct time.
The same problem occurs in the TIME window (00,00,00) when I start " ADD QSOS MANUALLY".
Same problem on two different PCs.
What could be wrong?
|
Thank you AKI,
I found the problem. It was actually the 9700 transceiver; I¡¯m not sure why the settings in the CIV options changed
So it has nothing to do with Logger32. Everything is back to normal now
?
Thank you very much AKI
?
73' Thierry
|
Thierry OK Then try "Rollback to previous version"? (Click Tools in main menu)
On 2025-05-10 ÍÁ 15:32:43, tk1cx@... via groups.io <tk1cx.thierry@...> wrote: Yes, this option is checked
?
I forgot to mention that the frequency displays correctly in other software
?
?
73' Thierry
|
Yes, this option is checked
?
I forgot to mention that the frequency displays correctly in other software
?
?
73' Thierry
|
Click Setup in main menu. Click Frequency. Is this option checked ?
On 2025-05-10 ÍÁ 15:17:05, tk1cx@... via groups.io <tk1cx.thierry@...> wrote:
Hello, ?
I¡¯m currently encountering an issue with Logger32 (QO-100 version). For the past two days, when I open the software, the frequency no longer appears¡ªneither in the Radio Panel nor in the Logbook Entry window. ?
However, all macro commands still function correctly in the Radio Panel.
I haven¡¯t made any changes to my configuration. My other Logger32 setups, such as the one for my IC-7600, are working normally.
I launch Logger32 using the batch file that allows me to choose the desired configuration. ?
I would appreciate your assistance in resolving this issue.
?
Thank you 73' Thierry tk1cx
|
Hello, ?
I¡¯m currently encountering an issue with Logger32 (QO-100 version). For the past two days, when I open the software, the frequency no longer appears¡ªneither in the Radio Panel nor in the Logbook Entry window. ?
However, all macro commands still function correctly in the Radio Panel.
I haven¡¯t made any changes to my configuration. My other Logger32 setups, such as the one for my IC-7600, are working normally.
I launch Logger32 using the batch file that allows me to choose the desired configuration. ?
I would appreciate your assistance in resolving this issue.
?
Thank you 73' Thierry tk1cx
|
Thank you so much 73 ? FM8TF ? ? if you do not change parameters in your transceiver, this also works: ?
toggle quoted message
Show quoted text
El mi¨¦, 7 may 2025 a las 19:26, Jean-Jos¨¦ JULIEN via (<fm8tf972= [email protected]>) escribi¨®: Thank you so much 73 FM8TF ? ? check the setting in the 710 radio, the CAT / COM port speed. I think the default value is all the way up in 50-100,000 range, not 9,600 like you have in the logger ? On Wed, May 7, 2025 at 9:52?AM Jean-Jos¨¦ JULIEN via <fm8tf972=[email protected]> wrote: Aki, I installed the driver and have the two serial ports as you said. I had configured the radio on the enhanced port in Logger32 but I don't have any reaction when changing band or frequency on the transceiver in Logger32. How do I check if they are linked ? ? 73 de Jean-Jose FM8TF ? 
? 
? 
? ? Jiean-Jose Please read USB driver install manual provided by Yaesu. On 2025-05-07 Ë® 10:58:03, Jean-Jos¨¦ JULIEN via <fm8tf972@...> wrote: Hi Aki, ? It seems I have some problem to install the driver. When I connect the USB Cable the unit is not known. So the two serial port as you said doesn't appear. ? ? ? Jiean-Jose You need following steps. 1. Download and install USB driver (Yaesu web site) 3. Look at Windows device manager. You see two serial port"'Enhanced" and "Standard") 4. Select FT991 as radio and correct com port (Enhanced) in Logger32 radio setup table. 5. Baudrate is the same as one in FT891 menu setting. What is your problem with the USB driver ? On 2025-05-07 Ë® 8:54:50, Jean-Jos¨¦ JULIEN via <fm8tf972@...> wrote: Hi, ? I just received my new YAESU FT-710 could you please help me to have it connected to Logger32. I have the USB Cable but seems to have some matter with the USB Driver. ? Thank you for your answer. ? 73 FM8TF Jean-Jose
|
I found a misleading (well OK, plain wrong!) answer for this issue in the FAQs for the CW Machine chapter of the manual, so I'll replace it with this:
 73 Gary? ?beater/tester &?
Honor Roll &? checker
On Fri, 9 May 2025 at 07:04, William Q Meeker via <wqmeeker= [email protected]> wrote: Thanks, Bob.
?
That fixed.
?
73,
?
Bill
K0KT
|
Thanks, Bob.
?
That fixed.
?
73,
?
Bill
K0KT
|
Sounds/looks like the CW Machine is opening when Logger32 starts, but is off screen somewhere and you can't see it. The FIND lost windows feature in Logger32 will not find the CW Machine because it is not a Logger32 window, it is a standalone program.
?
With Logger32 running, type CtrL+Alt+Del to open the windows task manager.?Scroll down and find CW Machine. Right click on it, and click END TASK. The Morse key button should change back to blue.
?
Now you can manually start the CW Machine at will. But wait, it'll probably start off screen somewhere again, and you'll be back to square?one. So, stop Logger 32. Look in the default Logger32 directory for a file CW.INI. It is a simple text file. Open it and look for two?lines
?
Top=xxxx
Left=xxx
?
Change the xxx to 0. Save the changes
?
Now, when you start the CW Machine it will be at the top left corner of the screen.
?
Or something like that. SeventyThree(s).
?
?
On 05/08/2025 1:55 PM EDT William Q Meeker via groups.io <wqmeeker@...> wrote:
?
?
I have moved Logger32 to a new computer used all of the files from my backup and everything seems to be working fine except that the CW Machine is not available. The key icon and "Show CW machine" under View are grayed out. I am running version 4.0.337 and the cw.ini and cw.exe files are on the Logger32 folder (along with everything else).
?
I tried to open the cw.exe file and got a popup telling me "Invalid port number," mentioning Port 8. In my MK2R, Winkeyer2 is assigned to Com port 8.
?
Any suggestions on what I am missing?
?
73,
?
Bill
K0KT
|
I have moved Logger32 to a new computer used all of the files from my backup and everything seems to be working fine except that the CW Machine is not available. The key icon and "Show CW machine" under View are grayed out. I am running version 4.0.337 and the cw.ini and cw.exe files are on the Logger32 folder (along with everything else).
?
I tried to open the cw.exe file and got a popup telling me "Invalid port number," mentioning Port 8. In my MK2R, Winkeyer2 is assigned to Com port 8.
?
Any suggestions on what I am missing?
?
73,
?
Bill
K0KT
|
Hi
if you do not change parameters in your transceiver, this also works:
73? jose EA4AFP
El mi¨¦, 7 may 2025 a las 19:26, Jean-Jos¨¦ JULIEN via (<fm8tf972= [email protected]>) escribi¨®: Thank you so much 73 FM8TF ? ? check the setting in the 710 radio, the CAT / COM port speed. I think the default value is all the way up in 50-100,000 range, not 9,600 like you have in the logger ? On Wed, May 7, 2025 at 9:52?AM Jean-Jos¨¦ JULIEN via <fm8tf972=[email protected]> wrote: Aki, I installed the driver and have the two serial ports as you said. I had configured the radio on the enhanced port in Logger32 but I don't have any reaction when changing band or frequency on the transceiver in Logger32. How do I check if they are linked ? ? 73 de Jean-Jose FM8TF ? 
? 
? 
? ? Jiean-Jose Please read USB driver install manual provided by Yaesu. On 2025-05-07 Ë® 10:58:03, Jean-Jos¨¦ JULIEN via <fm8tf972@...> wrote: Hi Aki, ? It seems I have some problem to install the driver. When I connect the USB Cable the unit is not known. So the two serial port as you said doesn't appear. ? ? ? Jiean-Jose You need following steps. 1. Download and install USB driver (Yaesu web site) 3. Look at Windows device manager. You see two serial port"'Enhanced" and "Standard") 4. Select FT991 as radio and correct com port (Enhanced) in Logger32 radio setup table. 5. Baudrate is the same as one in FT891 menu setting. What is your problem with the USB driver ? On 2025-05-07 Ë® 8:54:50, Jean-Jos¨¦ JULIEN via <fm8tf972@...> wrote: Hi, ? I just received my new YAESU FT-710 could you please help me to have it connected to Logger32. I have the USB Cable but seems to have some matter with the USB Driver. ? Thank you for your answer. ? 73 FM8TF Jean-Jose
|
Jean-Jos¨¦ JULIEN
ZL2iFB