开云体育

I have all the fields set to automatically capitalize the first letter on the name and QTH but not the state,? nor can find how to do it in the superbly written manual? I would also like to know how

Who is AD1C. what is the/a CTY file? Logger32 uses a file called CTY.XML from Club Log to keep the country/prefix databases up to date. This file is updates daily, and can be loaded into Logger32

Hi Aki, Many thanks for the prompt reply, I did not know that, TNX for the info. 73, Dusan YU1EA Sent: 03 May 2025 07:45 To: Hanlogger <[email protected]> Subject: Re: [hamlogger] Logger32 and CTY

Dusan Why you need? that ??? Logger32 has perfect Country/Prefix database which is regularly updated by ClubLog exception list. 73 de aki JA1NLX

Hi, I have asked Jim AD1C to install cty file in Logger32 but right now it is not possible to install. Here is the answer from him-see bwlow. 73 Dusan YU1EA. Hello Dusan, Please ask the software

The original setup of SSB=xxx, RTTY=xxx, and CW=xxx was correct. The mode used here is the operating mode, not the radio mode. I have made changes to the #ModeModifier# function and will send you a

ALAMOGORDO AMATEUR RADIO CLUB'S 39TH ANNUAL HAMFEST ARRL SANCTIONED 30 Aug ?2025 Otero County Fair grounds (in Alamogordo NM) 7am to 3pm-ish Admission: Free!!! Vendors can set up day before 3 to 7pm

Works fine. Thanks for info Frank and Bob. Correct config is CW|CWL to work with Radio 1 and Radio 2 [cid:9c592633-3fee-42b3-bf97-d7f6260f9e06] Many thanks! ________________________________ Fabián

Bob, I do not think so. I have changed to CWU and USB, but it did not help, please... Best regards, Alec ------ Wiadomo?? oryginalna ------ Nadawca "Bob via groups.io" <k4cy@...>

Section 34.9 (page 780) of the help file is dedicated to this topic. SeventyThree(s).

Hi Dirk ...thank you ...will do that 73's Mike sp5ewx pt., 2 maj 2025, 09:00 u?ytkownik ON4CT via groups.io <on4ct= [email protected]> napisa?:

Hi Fabian, Smartsdr understands cwl or cwu NOT cw and you must change the radio mode in bands&modes to cwl or cwu - whichever sideband you have configured in Smartsdr. You really need to read section

You haven't read the manual have you? Try CW/CWL This sets the radio mode as CW for radio 1, and CWL for radio 2. SeventyThree(s).

I haven't tested this, but is the problem that SmartSDR does not have a mode of CW, it uses CWL or CWR. SeventyThree(s).

Thanks Frank for answer… This is my config (band/mode) for 40m (for example). This works OK on my RADIO 1 (Elecraft K3) but wrong mode, as I said, on RADIO 2 (FlexRadio 8400). [Captura de pantalla

Hi Fabian, In Smartsdr navigate to settings -> radio setup -> phone/cw and select which sideband you wish to use in cw either CWL or CWU,? CWL preferred. In Logger32 navigate to Tools -> setup bands

Look at your BandPlan (TOOLS | SETUP BANDS & MODES). Column 6 for Radio Mode What is the Radio Mode set to on the CW rows? Flex radios do not have a "CW" radio mode, they use CWL or CWR.

Hi, I have tested the following RCP DX Spot macro set-ups: All is OK, except for #ModeModifier# which is supposed to change the radio filters depending on the mode. Commands are correct - when applied

Debug data: [IMAGE 2025-05-02 09:50:15.jpg] [IMAGE 2025-05-02 09:50:18.jpg] [IMAGE 2025-05-02 09:50:24.jpg] ________________________________ Fabián Malnero Maccari, EB1TR https://www.eb1tr.com

Good morning, I have a problem and I'm not sure if it could be related to configuration. When I change frequency, the mode change command to CW doesn't seem to be sent correctly. Switching to USB and