First thanks to Rick for the QSL utility and his other add-ins that work great. One issue with the QSL utility that I wish could be addressed is the following. The utility removes all the Flag to Upload to LOTW before it actually uploads the file. Today I attempted to upload almost 800 QSO'S to LOTW and the utility indicated the ADIF file was signed and uploaded and asked if I wanted to remove the QSL upload flag to which I said yes. When I attempted to download from LOTW I was told there was an error and to try again later. Well, the server was not available so now I have almost 800 QSO's that should still be flagged as Send LOTW QSL.
Isn't there a way that the Send LOTW QSL flag wouldn't get removed until there is an actual confirmation of a successful upload, not just the signing of the ADIF file by TQSL?
?
Thanks...K2QB
|
I have no idea what a AGHIv?font is, but if it works for you on the Logbook Entry Window, use it. SeventyThree(s).
On 03/03/2025 8:55 AM EST Valery Prodanov via groups.io <ur5wca@...> wrote:
?
?
Okay, then explain to me why it is possible to enter information in Cyrillic when using the AGHIv Cyrillic Normal font?
?
|
Okay, then explain to me why it is possible to enter information in Cyrillic when using the AGHIv Cyrillic Normal font?
?
|
In your example, Logger32 uses the ADIF fields NAME and QTH, not NAME_INTL and QTH_INTL
?
The ADIF fields NAME and QTH use ASCII characters 32 to 126. The NAME_INTL and QTH_INTL use UTF-8 encoded Unicode.
?
Logger32 does not support import/export of ASX files, only ADIF files. Unicode fields (like NAME_INTL and QTH_INTL) are not allowed in ADIF files, only ADX files.
?
The short answer to your question is no, the Logbook Entry Window entry fields support ASCCI characters 32 to 126 only. This is by design.
?
Or something like that. SeventyThree(s).
On 03/03/2025 5:09 AM EST Valery Prodanov via groups.io <ur5wca@...> wrote:
?
?
Hello Bob
in the QSO input window, not a single font supports Cyrillic. Can this be fixed? In other windows and tables everything is fine. Thank you,
Valery 73
?
|
Hello Bob
in the QSO input window, not a single font supports
Cyrillic. Can this be fixed? In other windows and tables everything is fine.
Thank you,
Valery 73
?
|
If, as you say, there are no decoded callsigns appearing the UDP BandMap, then it is possible/probable that Logger32 and JTDX (or whatever) are not talking to each other by UDP messages. One of the numerous messages is the all important 'Log this contact' message.
?
You should probably check that the UDP port in JTDX (or whatever) and Logger32 are both open, and they are both using?the same port #. You could also look at the UDP port debug window to see in JTDX (or whatever) is talking to Logger32.
?
SeventyThree(s).
On 02/28/2025 8:44 AM EST Ron Rushton via groups.io <cqdxer@...> wrote:
?
?
?
Sorry about ?little information , the call signs don¡¯t show up in the band map panel and I also checked the tcp/adif is and it was unchecked Bob, ?every thing working on the 26th of Feb and nothing was installed on or after shutdown my evening time, using windows 10 pro and to be honest I¡¯ve had this as the only issue in a hell of a while
?
Ron G6GA
On 27 Feb 2025, at 7:49?pm, Bob via groups.io <k4cy@...> wrote:
Precious little information ....I'll assume you're using UDP logging. I'll further assume the Logger32 UDP BandMap is alive as well, and showing decoded stations callsigns.
?
If my assumptions are correct, then on the UDP BandMap click CONFIG. Click LOGGING OPTIONS. Make sure the TCP/ADIF LOGGING option is UNchecked. If it is checked, it turns UDP logging off.
?
SeventyThree(s).
On 02/27/2025 2:36 PM EST Ron Rushton via groups.io <g6ga@...> wrote:
?
?
Anyone had any problems today as regard to logging FT8 and FT4 qso¡¯s direct into to logger32
none of qso¡¯s were logged into my logbook using?
JTDX WSJTX luck has if the went info there respective logbooks. Everything worked as normal yesterday nothing added today or removed?
73 Ron G6GA
|
Sorry about ?little information , the call signs don¡¯t show up in the band map panel and I also checked the tcp/adif is and it was unchecked Bob, ?every thing working on the 26th of Feb and nothing was installed on or after shutdown my evening time, using windows 10 pro and to be honest I¡¯ve had this as the only issue in a hell of a while
Ron G6GA
toggle quoted message
Show quoted text
On 27 Feb 2025, at 7:49?pm, Bob via groups.io <k4cy@...> wrote:
?
Precious little information ....I'll assume you're using UDP logging. I'll further assume the Logger32 UDP BandMap is alive as well, and showing decoded stations callsigns.
?
If my assumptions are correct, then on the UDP BandMap click CONFIG. Click LOGGING OPTIONS. Make sure the TCP/ADIF LOGGING option is UNchecked. If it is checked, it turns UDP logging off.
?
SeventyThree(s).
On 02/27/2025 2:36 PM EST Ron Rushton via groups.io <g6ga@...> wrote:
?
?
Anyone had any problems today as regard to logging FT8 and FT4 qso¡¯s direct into to logger32
none of qso¡¯s were logged into my logbook using?
JTDX WSJTX luck has if the went info there respective logbooks. Everything worked as normal yesterday nothing added today or removed?
73 Ron G6GA
|
Precious little information ....I'll assume you're using UDP logging. I'll further assume the Logger32 UDP BandMap is alive as well, and showing decoded stations callsigns.
?
If my assumptions are correct, then on the UDP BandMap click CONFIG. Click LOGGING OPTIONS. Make sure the TCP/ADIF LOGGING option is UNchecked. If it is checked, it turns UDP logging off.
?
SeventyThree(s).
On 02/27/2025 2:36 PM EST Ron Rushton via groups.io <g6ga@...> wrote:
?
?
Anyone had any problems today as regard to logging FT8 and FT4 qso¡¯s direct into to logger32
none of qso¡¯s were logged into my logbook using?
JTDX WSJTX luck has if the went info there respective logbooks. Everything worked as normal yesterday nothing added today or removed?
73 Ron G6GA
|
Anyone had any problems today as regard to logging FT8 and FT4 qso¡¯s direct into to logger32
none of qso¡¯s were logged into my logbook using?
JTDX WSJTX luck has if the went info there respective logbooks. Everything worked as normal yesterday nothing added today or removed?
73 Ron G6GA
|
GE Bob, I have learned another possibility : SPLIT
how did I live without it till today ... hehe
Incidentally I had an old L32 manual so I did not find your references, now is ok.
TNX x help
73
Phil
|
AHHH!? So you are the ONE !!!!???
73 de Larry K8YYY
If I needed to do that, I would use macros I already have ...
?
a)? Split up 5
b)??Tune
c)? Split off.
?
SeventyThree(s).
?
PS. I always tune on the TX frequency. It gives the other station warning to turn down his RF gain before I call ...
?
?
HI Gary, John et All.
Thank you for the advices, after 20 et more years of L32 use I have learned more options I never used HI.
Both options the Scratchpad and the DX-Spot_History relate to the SPOTs list,?
but these are not my almost 20Y_newby needs...
Let me be more specific: I am on QRG_A have to check the PA_tuning and dont want to TX on A_QRG
so I move to QRG_B anywhere up\down the band or just move from A to B or even C,D,E qrgs
(the ColibriNano SDR and his big brothers) have a memorized list of more that 10 positions)
and I want go back without being?related to any SPOT.
For the QRG BtoA move N1MM has F8 hotkey, only one position but it suffice in many occasions.
Bet you to recall the previous QRG....
Or take pen&paper to write on HI.
As I have written in my previous post the modern FLEXRADIO8k6 has not such feature...
but this is another story
73
Phil ex IC8POF-now IU0EBV
?
|
If I needed to do that, I would use macros I already have ...
?
a)? Split up 5
b)??Tune
c)? Split off.
?
SeventyThree(s).
?
PS. I always tune on the TX frequency. It gives the other station warning to turn down his RF gain before I call ...
On 02/26/2025 1:31 PM EST ic8pof via groups.io <ic8pof@...> wrote:
?
?
HI Gary, John et All.
Thank you for the advices, after 20 et more years of L32 use I have learned more options I never used HI.
Both options the Scratchpad and the DX-Spot_History relate to the SPOTs list,?
but these are not my almost 20Y_newby needs...
Let me be more specific: I am on QRG_A have to check the PA_tuning and dont want to TX on A_QRG
so I move to QRG_B anywhere up\down the band or just move from A to B or even C,D,E qrgs
(the ColibriNano SDR and his big brothers) have a memorized list of more that 10 positions)
and I want go back without being?related to any SPOT.
For the QRG BtoA move N1MM has F8 hotkey, only one position but it suffice in many occasions.
Bet you to recall the previous QRG....
Or take pen&paper to write on HI.
As I have written in my previous post the modern FLEXRADIO8k6 has not such feature...
but this is another story
73
Phil ex IC8POF-now IU0EBV
?
|
HI Gary, John et All.
Thank you for the advices, after 20 et more years of L32 use I have learned more options I never used HI.
Both options the Scratchpad and the DX-Spot_History relate to the SPOTs list,?
but these are not my almost 20Y_newby needs...
Let me be more specific: I am on QRG_A have to check the PA_tuning and dont want to TX on A_QRG
so I move to QRG_B anywhere up\down the band or just move from A to B or even C,D,E qrgs
(the ColibriNano SDR and his big brothers) have a memorized list of more that 10 positions)
and I want go back without being?related to any SPOT.
For the QRG BtoA move N1MM has F8 hotkey, only one position but it suffice in many occasions.
Bet you to recall the previous QRG....
Or take pen&paper to write on HI.
As I have written in my previous post the modern FLEXRADIO8k6 has not such feature...
but this is another story
73
Phil ex IC8POF-now IU0EBV
?
|
Thanks Rick !
73 de IK6CGO
|
There is no column for OQRS on the Logger32 Logbook Page or Previous QSOs? windows. SeventyThree(s).
On 02/26/2025 4:54 AM EST john Kalou via groups.io <z50john@...> wrote:
?
?
Good morning can my helping to where is the date on request oqrs? card i can't not to find maybe is not enable ?
?
Thanks?
|
On Logsync you will need to use the dropdown on the LOTW tab and
select the call you want to upload under. That dropdown is filled
by reading the station_data file that is created by Tqsl. If you
don't have a station_date file created then open Tqsl and it is
located on the top menu.
73 Rick N2AMG
On 2/26/2025 3:04 AM, IK6CGO via
groups.io wrote:
Hi to all,
I'm using L32LogSinch v2.0.19.8 and I have to say a big
thank to Rick N2AMG, the program works great.
Now, before I have possible problems, I ask your opinion.
On TQSL I have two certificates, my call IK6CGO
and the call IQ6MC club station.
On Logger32 I have the two calls (operators), on L32LogSinch,
both for Lotw and for ClubLog, now for the auto upload I have
set ONLY for the call IK6CGO and now I would
like to add and set also IQ6MC, it is enough that I add this
call both for ClubLog and for Lotw. My question is: will the
auto upload work separately when I use IK6CGO or IQ6MC?
Obviously on Logger32 I will have to change "operator" first
Thanks in advance and best 73' de IK6CGO
|
Sorry for the mistake, I've send this email to a
wrong group.
73's Lenio IZ5ILJ.
Il 26/02/2025 11:14, IZ5ILJ Lenio ha
scritto:
toggle quoted message
Show quoted text
Hello everyone, can anyone tell me
the name of the font used for the frequency?
Some font must be corrupted on
my PC because I can see like this!
Thanks in advance to anyone who
can help me, 73's Lenio IZ5ILJ.
|
HI John,? once I did the?OQRS request I flag also the QSL sent and this will write the date in the QSL_SENT field. I guess that if you request a QSL online, you are not going to send also paper QSL.
Andrea iz2lsc
Il giorno mer 26 feb 2025 alle ore 10:54 john Kalou via <z50john= [email protected]> ha scritto: Good morning can my helping to where is the date on request oqrs? card i can't not to find maybe is not enable ?
?
Thanks?
|
Hello everyone, can anyone tell me
the name of the font used for the frequency?
Some font must be corrupted on my
PC because I can see like this!
Thanks in advance to anyone who
can help me, 73's Lenio IZ5ILJ.
|
Good morning can my helping to where is the date on request oqrs? card i can't not to find maybe is not enable ?
?
Thanks?
|
Jim K2QB
IK6CGO
IZ5ILJ Lenio