I'm trying to export it as an adif backup file to a thumb drive.
Just a SWAG, but are you trying to export a file to LoTW (or eQSL, or somewhere)? If my guess is correct, someone else will have to answer your question, I don't use LoTW (or eQSL). SeventyThree(s).
?
PS. Whatever you're using, at least it works which is better than Logger32 :)
?
?
I should have said, EXPORT my log, rather than download. This problem has been on-going for many years here at my shack. Without?resolution, I am using another inferior logging program until I can figure out what is happening with Logger32.
?
73,
Bob/W4GJ
Huh? Download your log from where? Same problem as who? SeventyThree(s)
?
?
I keep experiencing the same problem with Logger 32 freezing and not responding when I attempt to download my log.
?
I have Logger 32 version 4.0.335 and Windows 12.
?
Anyone have any ideas on how I can overcome this problem???
?
TNX,
Bob/W4GJ
?
?
?
?
?
--
Train like you've never won, fence like you've never lost!? 'stro
|
Just a SWAG, but are you trying to export a file to LoTW (or eQSL, or somewhere)? If my guess is correct, someone else will have to answer your question, I don't use LoTW (or eQSL). SeventyThree(s).
?
PS. Whatever you're using, at least it works which is better than Logger32 :)
On 03/11/2025 10:16 AM EDT Bob Lightner via groups.io <bobw4gj@...> wrote:
?
?
I should have said, EXPORT my log, rather than download. This problem has been on-going for many years here at my shack. Without?resolution, I am using another inferior logging program until I can figure out what is happening with Logger32.
?
73,
Bob/W4GJ
Huh? Download your log from where? Same problem as who? SeventyThree(s)
?
?
I keep experiencing the same problem with Logger 32 freezing and not responding when I attempt to download my log.
?
I have Logger 32 version 4.0.335 and Windows 12.
?
Anyone have any ideas on how I can overcome this problem???
?
TNX,
Bob/W4GJ
?
?
?
?
?
--
Train like you've never won, fence like you've never lost!? 'stro
|
I should have said, EXPORT my log, rather than download. This problem has been on-going for many years here at my shack. Without?resolution, I am using another inferior logging program until I can figure out what is happening with Logger32.
73, Bob/W4GJ
Huh? Download your log from where? Same problem as who? SeventyThree(s)
?
?
I keep experiencing the same problem with Logger 32 freezing and not responding when I attempt to download my log.
?
I have Logger 32 version 4.0.335 and Windows 12.
?
Anyone have any ideas on how I can overcome this problem???
?
TNX,
Bob/W4GJ
?
-- Train like you've never won, fence like you've never lost!? 'stro
|
Huh? Download your log from where? Same problem as who? SeventyThree(s)
On 03/11/2025 9:38 AM EDT Bob Lightner via groups.io <bobw4gj@...> wrote:
?
?
I keep experiencing the same problem with Logger 32 freezing and not responding when I attempt to download my log.
?
I have Logger 32 version 4.0.335 and Windows 12.
?
Anyone have any ideas on how I can overcome this problem???
?
TNX,
Bob/W4GJ
?
|
Re: since v 4033 clicking on bandmap in CW changes it to USB
I see the pictures, but I don't know what I'm looking at.
?
I repeat - PowerSDR and Smart SDR does not know what radio mode CW and radio mode PKT-USB is. There entries in the Radio Mode column of the Setup Bands and Modes window are incorrect. CW Radio Mode must be CWL or CWU. PKT-USB must be DIGUL or DIGU..
?
SeventyThree(s).
On 03/11/2025 5:17 AM EDT ic8pof via groups.io <ic8pof@...> wrote:
?
?
GM Bob, I repeat : for me the problem is elsewhere in the L32 settings.
Maybe in the EDIT BAND&MODES ?
I have tried L32-telnet connection alone and it makes the same error.
Of course it goes on USB if the freq is above 10Mhz and goes to LSB if below 10Mhz...
?
The Flex radio and SDC combo work ok as I use also N1MM and here is all ok.
?
L32 takes the spots from the SDC server ( or itself alone ) but something has happened after
upgrading from v.40333-34-35 , but now makes same error also in v.40332 as I have copies of
old directories.
?
I recall I have changed the CW in the BAND&MODES edit ... but cannot individuate the error.
?
?
?
73
Phil
?
?
?
|
I keep experiencing the same problem with Logger 32 freezing and not responding when I attempt to download my log.
I have Logger 32 version 4.0.335 and Windows 12.
Anyone have any ideas on how I can overcome this problem???
TNX, Bob/W4GJ
|
Re: since v 4033 clicking on bandmap in CW changes it to USB
I keep experiencing the same problem with Logger 32 freezing and not responding when I attempt to download my log.
I have Logger 32 version 4.0.335 and Windows 12.
Anyone have any ideas on how I can overcome this problem???
TNX, Bob/W4GJ
HI, this behaviour happens from v4033,
if I click a CW spot on the L32 bandmap it is changed to USB.
That happens also on other bands.
I have already "backrolled" to v.4032 and the bandmap click is OK.
In the mean time a solution is found I go back to v.4032
73
Phil
ex-ic8pof, now iu0ebv
-- Train like you've never won, fence like you've never lost!? 'stro
|
Possible bug with Radio custom setting
Hi Bob,
I configured the radio custom setting to send specific CAT commands on QSY (enable break-in, set preamp, set the monitor off). Following the documented syntax the command sent to the radio is messed up (see the semicolon position).
Custom setting: SSB=BI1;PA01;ML0000;
Command sent to the radio (the semicolon is in the wrong position):
QSY Marker Set : Cleared
User action : I'm busy, poll reply ignored
Set radio Freq/Mode : FA014330000;MD02;SH0BI1;PA01;ML0000;;FA014330000;
DX Spot sequence completed : 1 command lines executed in 0,135 seconds. Poll every 100 ms
Poll : IF;
QSY Marker Set : Radio Freq: 14330 ? QSY Marker: 14330,000
To have it working I need a trick configuring the custom setting like following (always note the semicolon position) : SSB=;BI1;PA01;ML0000
with this the command is OK:
QSY Marker Set : Cleared
User action : I'm busy, poll reply ignored
Set radio Freq/Mode : FA014320000;MD02;SH0;BI1;PA01;ML0000;FA014320000;
DX Spot sequence completed : 1 command lines executed in 0,025 seconds. Poll every 100 ms
Poll : IF;
QSY Marker Set : Radio Freq: 14320 ? QSY Marker: 14320,000
73s
Andrea, IZ2LSC
|
Re: since v 4033 clicking on bandmap in CW changes it to USB
GM Bob, I repeat : for me the problem is elsewhere in the L32 settings.
Maybe in the EDIT BAND&MODES ?
I have tried L32-telnet connection alone and it makes the same error.
Of course it goes on USB if the freq is above 10Mhz and goes to LSB if below 10Mhz...
?
The Flex radio and SDC combo work ok as I use also N1MM and here is all ok.
?
L32 takes the spots from the SDC server ( or itself alone ) but something has happened after
upgrading from v.40333-34-35 , but now makes same error also in v.40332 as I have copies of
old directories.
?
I recall I have changed the CW in the BAND&MODES edit ... but cannot individuate the error.
?
?
?
73
Phil
?
?
?
|
Re: Getting those Granted QSO's right
Finaly got Clublog updated, don't know what went wrong the first time, anyhow, now I was able to import all to Logger32.
?
Thanks for listening ;-)
|
Re: Getting those Granted QSO's right
|
Re: Getting those Granted QSO's right
I never bother with logger and use LOTW as my bible...
Tom
I have never submitted a paper qsl for DXCC, they are all LoTW.?
It is the Granted ones I cant get right.
|
Re: Getting those Granted QSO's right
And how to import this file into Logger32? Cant see this described as a way to import LoTW.
|
Re: Getting those Granted QSO's right
Easy !
In LoTW page, go to Awards menu, select DXCC, and on the page that opens up, choose the lowest menu called DXCC QSL download..
?
Tom GM4FDM when they created LoTW, they manually added your "points" already credited with paper cards. But this operation was poorly done. Some QSOs were intered normally, some were
entered with a wrong date, some were entered even without a callsign (just the prefix). But for the system to work, they HAD TO include the paper card credits, otherwise, ¡ let's say you had Bouvet credited with paper cards, your LoTW numbers had to include
that, so a newer operation that would upload to LoTW would not show as not credited.
?
73
Paul F6EXV
?
?
I have never submitted a paper qsl for DXCC, they are all LoTW.?
It is the Granted ones I cant get right.
|
Re: Getting those Granted QSO's right
I have never submitted a paper qsl for DXCC, they are all LoTW.?
It is the Granted ones I cant get right.
|
Re: since v 4033 clicking on bandmap in CW changes it to USB
I just looked at the picture again. If you are using the PowerSDR or SamrtSDR selection in your Logger32 radio setup, you have more problems than just CW.
?
The signature series flex radios CAT commands support the following radio modes LSB USB CWL CWU FM AM DIGU DIGLSAM FDV and DSTR
?
Your PKT USB and CW rows do not exist in Flex speak, so they are ignored and the radio is switched to USB or LSB depending on what band it is operation.
?
Or something like that. SeventyThree(s).
On 03/09/2025 2:01 PM EDT ic8pof via groups.io <ic8pof@...> wrote:
?
?
[Edited Message Follows]
HI of course I have tried the BandMode selections... nothing
the bandmap goes always to USB even if radio&cluster are in CW
...will look again tnx for inputs
?
@Gary: this error has began from v4033, untill then was OK.... and I stay in full of the CW QRG at 14020
???????????? tried also on 40 and 15 same error
?
?
73
?
Phil
?
PS band&modes crop ?
|
Re: since v 4033 clicking on bandmap in CW changes it to USB
... and if you click on a 40m CW DX Spot, does the radio change to LSB? SeventyThree(s).
On 03/10/2025 2:27 PM EDT ic8pof via groups.io <ic8pof@...> wrote:
?
?
GE, for what I am doing nothing happens with this ERROR.
Per sure I have done a bad manouvre somewhere and now the SPOT_click changes the mode from cw to SSB
.....
looking ahead...
73
Phil
|
Re: Getting those Granted QSO's right
I assume your logger file contains QSLs from paper as wel as electronic??? LOTW only contains confirmations from other stations who have uploaded to LOTW.
Tom
GM4FDM
Hi
?
I have tried to follow the manual step by step to import my approved qso's from LoTW into Logger32, but I can't get it right.
?
I downloaded the QSO file from LoTW, imported it into Logger32 using the Synchronize LOTW from an ADIF file option, but there are huge differences between LoTW and Logger32:
?
Logger32:
?
LoTW:
?
?
Challenge Lotw 2179, Logger32 2039
?
What am I doing wrong?
?
73 de Tom, LA9GX
|
Getting those Granted QSO's right
Hi
?
I have tried to follow the manual step by step to import my approved qso's from LoTW into Logger32, but I can't get it right.
?
I downloaded the QSO file from LoTW, imported it into Logger32 using the Synchronize LOTW from an ADIF file option, but there are huge differences between LoTW and Logger32:
?
Logger32:
?
LoTW:
?
?
Challenge Lotw 2179, Logger32 2039
?
What am I doing wrong?
?
73 de Tom, LA9GX
|
Re: Import of Chinese stations
Thanks Bob, that worked very well.
?
Sorry for not finding the solution available in the manual ;-)
?
Tom, LA9GX
|
