开云体育

That did it, thank you. [email protected]> wrote:

Look at the parallel logging configuration. There is an option there to reroute clicked-on DX Spots to the other PC. SeventyThree(s).

Several weeks ago, Logger32 lost the ability to send my radio to a dx spot frequency and to populate the entry window. Rig control works fine and I can type a frequency in and the radio will go there.

Alain, it IS painful. As I cannot define the added value in that venture I had to rollback to the previous version, too... Best regards, Alec ------ Wiadomo?? oryginalna ------ Nadawca "Bob via

Yes, there were changes made that slow down the opening of the Quick QSL window, but no changes that slow down how long it takes to change whatever you wanted to change. And, the delay in opening the

Since version v4.0.329 I have a problem with the Quick QSL window any update takes on this version very long time before applying and block any other action. On v4.0.328 the update is done instantly.

Only the last 10 are kept. Anything older is automatically deleted. SeventyThree(s).

Hello, On my rollback window, I have 4.0.318 to 4.0.328 possibility. Is possible to go back to an earlier versionn (before 4.0.318), and if yes, how ? Tks for your help and your answer. 73's.

So,? just recently starting seeing L32 with an odd radio connection problem... Radio is FTdx101D connected to L32 via a Microham Station Master box at 19200, N, 8, 1 and polling is set at 50mS, but

the software win4yaesu may do that winkey function https://yaesu.va2fsq.com/download-win4yaesu/ from Tom aka va2fsq . . .

My configuration, and it works perfectly :-) CW machine ->> CONFIG ->> flag SOFTWARE Keyer setup (wait a moment) SERIAL PORT choose the port com# STANDARD (not Enhanced) Flaggare -->> flag Use PTT to

Clark I do not know why PC keying does not work. However WinKeyer is better than software mode. I myself prefer WinKeyer. Mine is WinKeyMini by K1EL. Good luck 73 de aki JA1NLX

Hello Aki, I am sure I tried that and it did not work either.? So, I have given up trying to get CW Machine to send CW from my FTdx10 via software.? A local friend had a WinKeyer he was not using

Clark Try RTS keying instead of DTR keying. (Select RTS keying in your radio, check "CW keying use RTS,,," in CW machine) 73 de aki JA1NLX

Thanks for the tip. Will give it a go tomorrow.

Hmmmmm, OK. Your PTT is working fine using the CAT commands, so it seems it's just the CW keying using the DTR line on 'standard' virtual serial port Com23 that's playing up. I don't know why - sorry

Assuming your Logger32 installations were doing a full install, and not simply copying files/folders from one computer to another. My SWAG is that the dysfunctional PC has a Windows component, that

I have been using Logger 32 for many years. I did a fresh installed on a new computer. The CW machine under config, I click keyer setup and get the dreaded hour glass, and then nothing happens.

First, thanks guys for the speedy responses! Gary, thanks for the detailed info.? I had seen that info during my searches but was hoping to be able to do it without the hardware interface.? The

There are 2 ways to send CW. One is explained by Gary. Anther is to use RTS or DTR line in created virtual com port. You should set CW keying option in your radio. (DTR or RTS) You should set proper