开云体育

What is the "stop displaying spots" option? When you say "Logger32 turns itself off" do you mean Logger32 disappears from the screen and stops running? Is this a new problem? Did everything work as

included in logger32:JTDX, Cherry-picking, DX Spot logger32 turns itself off in a short time When DX Spot has the "stop displaying spots" option enabled, everything is ok

... and what problem would that be? There are so many that I loose track. SeventyThree(s).

Hi. Has anyone else encountered this problem? Even with the logger32 update, the problem is still not resolved

... and you could/should probably filter out DX Spots that originated outside of Europe. DX Spots originating from North Ealing and East Ealing may be of interest, but probably not those from

There are two additional settings to reduce the flow of excrement from the RBNs. Go to the DUPES tab of DX Spot blocking filters. Check these two options - i) Block RBN DX Spots match callsign and

rbncw is sending way too many stations.

Thanks again Prasad.? I am trying Ham Alert now because I use Club Log, I upload QSOs to Club Log automatically after each one. I am only getting needed band-slots for the whole of my log-book on

Hi Prasad Nice to see you again 73 Jan PA4JJ Op 23-11-2024 om 11:41 schreef Prasad via groups.io:

Chris, A good way to overcome this would be to use the wonderful hamalert.org site. That is if you also use Clublog. You can then set up the filter you want and get a Telnet feed only for the wanted

Thanks John and Prasad, that is exactly what I need? The spots appearing in the DX Spots Window have now slowed to a speed that I can read and click on them.? I have made one new band-slot already!

Chris, there is an option to display only highlighted DX spots. Right click in the DX Spots Window and navigate to this option: The same option is avaible in each of the Band Maps menus too. -- 73,

Hi Chris, Just enable this on the menu of each bandmap: * Show only Highlighted Spots* [image: image.png] 73, Prasad VU2PTT [email protected]> wrote:

I use the RBN to obtain CW spots in the DX Spots Window.? I am aware of the DX Spots Blocking/Pass Filters option to filter bands, continents, modes, etc, but is there a way to filter band-slots I

Bob, You know what ? That works ! Thanks ooooonce again ! 73 Paul ________________________________ De : [email protected] <[email protected]> de la part de Bob via groups.io

ulticast ? Could that be an option ? ________________________________ De : [email protected] <[email protected]> de la part de Bob via groups.io <k4cy@...> Envoyé : jeudi 21

Ciao Bob, tnx so much, now all it's ok 73 Lenio IZ5ILJ

Look at https://www.logger32.net/files/Logger32_v4_User_Manual.pdf section 2.12 (page 68) of the help file. SeventyThtrr(s).

Good morning everyone, after having closed Logger32 correctly yesterday evening, this morning I am unable to start it because when it almost reaches the end of loading, that is, when "Check database

Gary, Thanks that was it. I had a problem and had to rebuild the log. So I set it to update every 10 QSOs. Since I import most of my Q’s from N1MM, it isn’t a big problem. If it becomes so, I’ll