Re: Please assist with Pfx?? Error - Nothing is populated in Pfx Column just ??
Looks like you've done everything as suggested. Before you attempt to uninstall/reinstall Logger32, be sure to save all your logbooks safely in ADIF format. Check that all QSOs have been saved, and keep them safely somewhere off your PC. 73.
On 04/27/2025 11:25 PM EDT Avi 4X1WQ via groups.io <avi.rochman@...> wrote:
?
?
Hello Bob,
Following your suggestion I performed?CHKDSK c: /f - I hope and assume I did it correctly:
?
a) Command Prompt?with Admin privileges.?
?
STEP 1: Restarted the PC, and on the screen?was a message that the disk?was examined and errors corrected?before W10 was loaded,?then W10 started loading.
STEP 2: Started L32
RESULT: problem remained
?
?
b) PowerShell with Admin privileges. At the prompt type?
?
STEP 1: Restarted the PC, and on the screen?was a message that the disk?was examined and errors corrected?before W10 was loaded,?then W10 started loading.
STEP 2: Started L32
RESULT: problem remained
?
Do you think erasing?and reinstalling L32 might cure the problem?
?
Thank you,?
73 Avi
Thank you Bob,
I will do it tomorrow morning my local time and report back, been a long day for me¡.
Sorry for misunderstanding, just an average PC user guy¡.
73 Avi
?
?
Not quite?he test I had in mind. Start a Command Prompt (or PowerShell) with Admin privileges. At the prompt type CHKDSK c: /f??Use C: for the C drive, and /f to automatically fix any errors,
?
You might also check that you are not running out fo disk space. Maybe the disk optimization/compression needs more space. I don't know.
?
73.
?
?
Thank you Bob for your suggestion.
?
Did the scan?with?Windows CHKDSK utility of Hard Drives? (C) & (E) - no errors were found.
?
Problem still unresolved.
?
Bob I?appreciate your time and assistance very much.
If you or anyone else have any additional suggestions, I would appreciate it very much.
?
73 Avi 4X1WQ??
?
?
?
I think you will find the error message pops up when the download of the Club Log exceptions completes, and not when you start VE7CC. This is easy to test.
?
Messages on the Club Log download window verify that the download completed successfully and no data was lost. Then the process of optimizing/compressing the new file starts. This fails (you see the error message).?
?
So why can't Logger32compress the file? Could it be corrupt data on the disk? Try running the Windows CHKDSK utility to look for errors. Other than that, I have no suggestions. SeventyThree(s).
?
?
Hello Bob and thank you for your prompt response.
?
Yesterday after your 1st email, suggesting that "The error message is because your download of the Club Log exception database failed. Try it again.?" I tried 3 more times, but the problem remained.
?
In yesterday's trials I did the following:
?
STEP 1: The very first time in the day when I open L32, the Automatic AUTO UPDATE?process of Club Log exceptions update starts - no Errors are?displayed.
?
STEP 2: Connecting to VE7CC following Error pops up:
?
<image.png>
?
<image.png>
?
I press OK TAB and exit L32
STEP 3:????Start L32 but this time, NO- Auto Update of Club Log Exceptions updates starts.
STEP 4:? ? I Do manual update of Club Log Exceptions Update, looks OK, no Error shows
<image.png>
STEP 5: I connect to VE7CC - Error pops up and Pfx?? column is populated with ??
Yesterday I repeated steps 3 to 5, three times with the same failure result, so decided to try again next day (today) so the Auto Update of Club Log Exceptions updates process will start first automatically.?
??
Today?I repeated steps 1 to 5, first time, and then additional three times steps 3 to 5, the problem?remained.
?
Thank you very much for your help.
73 Avi
... and?
On 04/26/2025 9:59 AM EDT Bob < k4cy@...> wrote:
?
?
The error message is because your download of the Club Log exception database failed. Try it again. SeventyThree(s).
?
?
Hello,
Asking for your assistance in resolving Pfx?? error, see attached.
Restarting L32 and or PC (W10) doesn't cure the problem.
Thank you
73 Avi 4X1WQ
?
?
?
?
?
?
?
|
Re: Please assist with Pfx?? Error - Nothing is populated in Pfx Column just ??
Hello Bob, Following your suggestion I performed?CHKDSK c: /f - I hope and assume I did it correctly: ? a) Command Prompt?with Admin privileges.?
STEP 1: Restarted the PC, and on the screen?was a message that the disk?was examined and errors corrected?before W10 was loaded,?then W10 started loading. STEP 2: Started L32 RESULT: problem remained
b) PowerShell with Admin privileges. At the prompt type?
STEP 1: Restarted the PC, and on the screen?was a message that the disk?was examined and errors corrected?before W10 was loaded,?then W10 started loading. STEP 2: Started L32 RESULT: problem remained
Do you think erasing?and reinstalling L32 might cure the problem?
Thank you,? 73 Avi
Thank you Bob, I will do it tomorrow morning my local time and report back, been a long day for me¡. Sorry for misunderstanding, just an average PC user guy¡. 73 Avi
?
Not quite?he test I had in mind. Start a Command Prompt (or PowerShell) with Admin privileges. At the prompt type CHKDSK c: /f??Use C: for the C drive, and /f to automatically fix any errors,
?
You might also check that you are not running out fo disk space. Maybe the disk optimization/compression needs more space. I don't know.
?
73.
?
?
Thank you Bob for your suggestion.
?
Did the scan?with?Windows CHKDSK utility of Hard Drives? (C) & (E) - no errors were found.
?
Problem still unresolved.
?
Bob I?appreciate your time and assistance very much.
If you or anyone else have any additional suggestions, I would appreciate it very much.
?
73 Avi 4X1WQ??
?
?
?
I think you will find the error message pops up when the download of the Club Log exceptions completes, and not when you start VE7CC. This is easy to test.
?
Messages on the Club Log download window verify that the download completed successfully and no data was lost. Then the process of optimizing/compressing the new file starts. This fails (you see the error message).?
?
So why can't Logger32compress the file? Could it be corrupt data on the disk? Try running the Windows CHKDSK utility to look for errors. Other than that, I have no suggestions. SeventyThree(s).
?
?
Hello Bob and thank you for your prompt response.
?
Yesterday after your 1st email, suggesting that "The error message is because your download of the Club Log exception database failed. Try it again.?" I tried 3 more times, but the problem remained.
?
In yesterday's trials I did the following:
?
STEP 1: The very first time in the day when I open L32, the Automatic AUTO UPDATE?process of Club Log exceptions update starts - no Errors are?displayed.
?
STEP 2: Connecting to VE7CC following Error pops up:
?
<image.png> ?
<image.png> ?
I press OK TAB and exit L32
STEP 3:????Start L32 but this time, NO- Auto Update of Club Log Exceptions updates starts.
STEP 4:? ? I Do manual update of Club Log Exceptions Update, looks OK, no Error shows
<image.png>
STEP 5: I connect to VE7CC - Error pops up and Pfx?? column is populated with ??
Yesterday I repeated steps 3 to 5, three times with the same failure result, so decided to try again next day (today) so the Auto Update of Club Log Exceptions updates process will start first automatically.?
??
Today?I repeated steps 1 to 5, first time, and then additional three times steps 3 to 5, the problem?remained.
?
Thank you very much for your help.
73 Avi
... and?
On 04/26/2025 9:59 AM EDT Bob < k4cy@...> wrote:
?
?
The error message is because your download of the Club Log exception database failed. Try it again. SeventyThree(s).
?
?
Hello,
Asking for your assistance in resolving Pfx?? error, see attached.
Restarting L32 and or PC (W10) doesn't cure the problem.
Thank you
73 Avi 4X1WQ
?
?
?
?
?
|
Re: Please assist with Pfx?? Error - Nothing is populated in Pfx Column just ??
Hello Bob, I also check disk space, as you suggested, just forget to attach...... here it is:
73 Avi
Hello Bob, Following your suggestion I performed?CHKDSK c: /f - I hope and assume I did it correctly: ? a) Command Prompt?with Admin privileges.?
STEP 1: Restarted the PC, and on the screen?was a message that the disk?was examined and errors corrected?before W10 was loaded,?then W10 started loading. STEP 2: Started L32 RESULT: problem remained
b) PowerShell with Admin privileges. At the prompt type?
STEP 1: Restarted the PC, and on the screen?was a message that the disk?was examined and errors corrected?before W10 was loaded,?then W10 started loading. STEP 2: Started L32 RESULT: problem remained
Do you think erasing?and reinstalling L32 might cure the problem?
Thank you,? 73 Avi
Thank you Bob, I will do it tomorrow morning my local time and report back, been a long day for me¡. Sorry for misunderstanding, just an average PC user guy¡. 73 Avi
?
Not quite?he test I had in mind. Start a Command Prompt (or PowerShell) with Admin privileges. At the prompt type CHKDSK c: /f??Use C: for the C drive, and /f to automatically fix any errors,
?
You might also check that you are not running out fo disk space. Maybe the disk optimization/compression needs more space. I don't know.
?
73.
?
?
Thank you Bob for your suggestion.
?
Did the scan?with?Windows CHKDSK utility of Hard Drives? (C) & (E) - no errors were found.
?
Problem still unresolved.
?
Bob I?appreciate your time and assistance very much.
If you or anyone else have any additional suggestions, I would appreciate it very much.
?
73 Avi 4X1WQ??
?
?
?
I think you will find the error message pops up when the download of the Club Log exceptions completes, and not when you start VE7CC. This is easy to test.
?
Messages on the Club Log download window verify that the download completed successfully and no data was lost. Then the process of optimizing/compressing the new file starts. This fails (you see the error message).?
?
So why can't Logger32compress the file? Could it be corrupt data on the disk? Try running the Windows CHKDSK utility to look for errors. Other than that, I have no suggestions. SeventyThree(s).
?
?
Hello Bob and thank you for your prompt response.
?
Yesterday after your 1st email, suggesting that "The error message is because your download of the Club Log exception database failed. Try it again.?" I tried 3 more times, but the problem remained.
?
In yesterday's trials I did the following:
?
STEP 1: The very first time in the day when I open L32, the Automatic AUTO UPDATE?process of Club Log exceptions update starts - no Errors are?displayed.
?
STEP 2: Connecting to VE7CC following Error pops up:
?
<image.png> ?
<image.png> ?
I press OK TAB and exit L32
STEP 3:????Start L32 but this time, NO- Auto Update of Club Log Exceptions updates starts.
STEP 4:? ? I Do manual update of Club Log Exceptions Update, looks OK, no Error shows
<image.png>
STEP 5: I connect to VE7CC - Error pops up and Pfx?? column is populated with ??
Yesterday I repeated steps 3 to 5, three times with the same failure result, so decided to try again next day (today) so the Auto Update of Club Log Exceptions updates process will start first automatically.?
??
Today?I repeated steps 1 to 5, first time, and then additional three times steps 3 to 5, the problem?remained.
?
Thank you very much for your help.
73 Avi
... and?
On 04/26/2025 9:59 AM EDT Bob < k4cy@...> wrote:
?
?
The error message is because your download of the Club Log exception database failed. Try it again. SeventyThree(s).
?
?
Hello,
Asking for your assistance in resolving Pfx?? error, see attached.
Restarting L32 and or PC (W10) doesn't cure the problem.
Thank you
73 Avi 4X1WQ
?
?
?
?
?
|
Re: Please assist with Pfx?? Error - Nothing is populated in Pfx Column just ??
Hello Bob, Following your suggestion I performed?CHKDSK c: /f - I hope and assume I did it correctly: ? a) Command Prompt?with Admin privileges.?
STEP 1: Restarted the PC, and on the screen?was a message that the disk?was examined and errors corrected?before W10 was loaded,?then W10 started loading. STEP 2: Started L32 RESULT: problem remained
b) PowerShell with Admin privileges. At the prompt type?
STEP 1: Restarted the PC, and on the screen?was a message that the disk?was examined and errors corrected?before W10 was loaded,?then W10 started loading. STEP 2: Started L32 RESULT: problem remained
Do you think erasing?and reinstalling L32 might cure the problem?
Thank you,? 73 Avi
Thank you Bob, I will do it tomorrow morning my local time and report back, been a long day for me¡. Sorry for misunderstanding, just an average PC user guy¡. 73 Avi
?
Not quite?he test I had in mind. Start a Command Prompt (or PowerShell) with Admin privileges. At the prompt type CHKDSK c: /f??Use C: for the C drive, and /f to automatically fix any errors,
?
You might also check that you are not running out fo disk space. Maybe the disk optimization/compression needs more space. I don't know.
?
73.
?
?
Thank you Bob for your suggestion.
?
Did the scan?with?Windows CHKDSK utility of Hard Drives? (C) & (E) - no errors were found.
?
Problem still unresolved.
?
Bob I?appreciate your time and assistance very much.
If you or anyone else have any additional suggestions, I would appreciate it very much.
?
73 Avi 4X1WQ??
?
?
?
I think you will find the error message pops up when the download of the Club Log exceptions completes, and not when you start VE7CC. This is easy to test.
?
Messages on the Club Log download window verify that the download completed successfully and no data was lost. Then the process of optimizing/compressing the new file starts. This fails (you see the error message).?
?
So why can't Logger32compress the file? Could it be corrupt data on the disk? Try running the Windows CHKDSK utility to look for errors. Other than that, I have no suggestions. SeventyThree(s).
?
?
Hello Bob and thank you for your prompt response.
?
Yesterday after your 1st email, suggesting that "The error message is because your download of the Club Log exception database failed. Try it again.?" I tried 3 more times, but the problem remained.
?
In yesterday's trials I did the following:
?
STEP 1: The very first time in the day when I open L32, the Automatic AUTO UPDATE?process of Club Log exceptions update starts - no Errors are?displayed.
?
STEP 2: Connecting to VE7CC following Error pops up:
?
<image.png> ?
<image.png> ?
I press OK TAB and exit L32
STEP 3:????Start L32 but this time, NO- Auto Update of Club Log Exceptions updates starts.
STEP 4:? ? I Do manual update of Club Log Exceptions Update, looks OK, no Error shows
<image.png>
STEP 5: I connect to VE7CC - Error pops up and Pfx?? column is populated with ??
Yesterday I repeated steps 3 to 5, three times with the same failure result, so decided to try again next day (today) so the Auto Update of Club Log Exceptions updates process will start first automatically.?
??
Today?I repeated steps 1 to 5, first time, and then additional three times steps 3 to 5, the problem?remained.
?
Thank you very much for your help.
73 Avi
... and?
On 04/26/2025 9:59 AM EDT Bob < k4cy@...> wrote:
?
?
The error message is because your download of the Club Log exception database failed. Try it again. SeventyThree(s).
?
?
Hello,
Asking for your assistance in resolving Pfx?? error, see attached.
Restarting L32 and or PC (W10) doesn't cure the problem.
Thank you
73 Avi 4X1WQ
?
?
?
?
?
|
Re: Logger Radio Configuration for Yaesu FT-891
Thanks Damien.??
Will be noted in the manual:
73 Gary? ?beater/tester &?
Honor Roll &? checker
For the FTdx1200 for years I've used the FT2000 CAT settings with no problems.
|
Re: FT8 - Error in Soundinput
A bit more grist for the mill.
?
I have 3 sound cards on my Win10 machine. One is built-in and the other include 2 external USB types (1 for the Navigator interface and a 2nd for CW Skimmer). As indicated earlier, the Navigator Interface is not working AND now the CW Skimmer sound card is not functioning. All sound cards are recognized in Device Manager but the only card currently actually passing receive audio to the computer is the built-in sound card?
?
(Yes have checked to ensure that the correct sound card is selected in the software and on the taskbar!)
?
Thanks,
--
---------------
73, Rick
VE7TK
Website:?
|
FT8 - Error in Soundinput
First let me state that I do not think this is a Logger32 issue! I thought I'd poll the group for some advice!
?
I have been using a Navigator interface in the same configuration for digital modes including FT8 etc for years. Suddenly today when I tried FT8 I got the following message "An error opening the audio input device has occurred." I checked the audio source selection (USB Audio Codec) and all is well. I checked device driver and all the ports "seem" good. In addition, I could transmit an FT8 signal using the Navigator interface.
?
After several Win10 reboots but before going further and re-installing the Navigator ports I decided to try another rig. This time I used my QMX+ qrp rig with a BUILT-IN sound card. After setting up the QMX+ I received the same error? I tried both rigs using JTDX outside of Logger32. The same error?
?
The fact that the error seems independent of the sound card is baffling and suggests that neither Logger32 nor the Navigator interface is the issue and it might be a Windows10 problem??
?
Has anyone else encountered a similar problem? Thoughts appreciated.
?
Thanks,
--
---------------
73, Rick
VE7TK
Website:?
|
Re: Please assist with Pfx?? Error - Nothing is populated in Pfx Column just ??
Thank you Bob, I will do it tomorrow morning my local time and report back, been a long day for me¡. Sorry for misunderstanding, just an average PC user guy¡. 73 Avi
toggle quoted message
Show quoted text
On 27 Apr 2025, at 18:20, Bob via groups.io <k4cy@...> wrote:
?
Not quite?he test I had in mind. Start a Command Prompt (or PowerShell) with Admin privileges. At the prompt type CHKDSK c: /f??Use C: for the C drive, and /f to automatically fix any errors,
?
You might also check that you are not running out fo disk space. Maybe the disk optimization/compression needs more space. I don't know.
?
73.
On 04/27/2025 10:49 AM EDT Avi 4X1WQ via groups.io <avi.rochman@...> wrote:
?
?
Thank you Bob for your suggestion.
?
Did the scan?with?Windows CHKDSK utility of Hard Drives? (C) & (E) - no errors were found.
?
Problem still unresolved.
?
Bob I?appreciate your time and assistance very much.
If you or anyone else have any additional suggestions, I would appreciate it very much.
?
73 Avi 4X1WQ??
?
?
?
I think you will find the error message pops up when the download of the Club Log exceptions completes, and not when you start VE7CC. This is easy to test.
?
Messages on the Club Log download window verify that the download completed successfully and no data was lost. Then the process of optimizing/compressing the new file starts. This fails (you see the error message).?
?
So why can't Logger32compress the file? Could it be corrupt data on the disk? Try running the Windows CHKDSK utility to look for errors. Other than that, I have no suggestions. SeventyThree(s).
?
?
Hello Bob and thank you for your prompt response.
?
Yesterday after your 1st email, suggesting that "The error message is because your download of the Club Log exception database failed. Try it again.?" I tried 3 more times, but the problem remained.
?
In yesterday's trials I did the following:
?
STEP 1: The very first time in the day when I open L32, the Automatic AUTO UPDATE?process of Club Log exceptions update starts - no Errors are?displayed.
?
STEP 2: Connecting to VE7CC following Error pops up:
?
<image.png> ?
<image.png> ?
I press OK TAB and exit L32
STEP 3:????Start L32 but this time, NO- Auto Update of Club Log Exceptions updates starts.
STEP 4:? ? I Do manual update of Club Log Exceptions Update, looks OK, no Error shows
<image.png>
STEP 5: I connect to VE7CC - Error pops up and Pfx?? column is populated with ??
Yesterday I repeated steps 3 to 5, three times with the same failure result, so decided to try again next day (today) so the Auto Update of Club Log Exceptions updates process will start first automatically.?
??
Today?I repeated steps 1 to 5, first time, and then additional three times steps 3 to 5, the problem?remained.
?
Thank you very much for your help.
73 Avi
... and?
On 04/26/2025 9:59 AM EDT Bob < k4cy@...> wrote:
?
?
The error message is because your download of the Club Log exception database failed. Try it again. SeventyThree(s).
?
?
Hello,
Asking for your assistance in resolving Pfx?? error, see attached.
Restarting L32 and or PC (W10) doesn't cure the problem.
Thank you
73 Avi 4X1WQ
?
?
?
?
?
|
Re: Please assist with Pfx?? Error - Nothing is populated in Pfx Column just ??
Not quite?he test I had in mind. Start a Command Prompt (or PowerShell) with Admin privileges. At the prompt type CHKDSK c: /f??Use C: for the C drive, and /f to automatically fix any errors,
?
You might also check that you are not running out fo disk space. Maybe the disk optimization/compression needs more space. I don't know.
?
73.
On 04/27/2025 10:49 AM EDT Avi 4X1WQ via groups.io <avi.rochman@...> wrote:
?
?
Thank you Bob for your suggestion.
?
Did the scan?with?Windows CHKDSK utility of Hard Drives? (C) & (E) - no errors were found.
?
Problem still unresolved.
?
Bob I?appreciate your time and assistance very much.
If you or anyone else have any additional suggestions, I would appreciate it very much.
?
73 Avi 4X1WQ??
?
?
?
I think you will find the error message pops up when the download of the Club Log exceptions completes, and not when you start VE7CC. This is easy to test.
?
Messages on the Club Log download window verify that the download completed successfully and no data was lost. Then the process of optimizing/compressing the new file starts. This fails (you see the error message).?
?
So why can't Logger32compress the file? Could it be corrupt data on the disk? Try running the Windows CHKDSK utility to look for errors. Other than that, I have no suggestions. SeventyThree(s).
?
?
Hello Bob and thank you for your prompt response.
?
Yesterday after your 1st email, suggesting that "The error message is because your download of the Club Log exception database failed. Try it again.?" I tried 3 more times, but the problem remained.
?
In yesterday's trials I did the following:
?
STEP 1: The very first time in the day when I open L32, the Automatic AUTO UPDATE?process of Club Log exceptions update starts - no Errors are?displayed.
?
STEP 2: Connecting to VE7CC following Error pops up:
?
 ?
 ?
I press OK TAB and exit L32
STEP 3:????Start L32 but this time, NO- Auto Update of Club Log Exceptions updates starts.
STEP 4:? ? I Do manual update of Club Log Exceptions Update, looks OK, no Error shows
STEP 5: I connect to VE7CC - Error pops up and Pfx?? column is populated with ??
Yesterday I repeated steps 3 to 5, three times with the same failure result, so decided to try again next day (today) so the Auto Update of Club Log Exceptions updates process will start first automatically.?
??
Today?I repeated steps 1 to 5, first time, and then additional three times steps 3 to 5, the problem?remained.
?
Thank you very much for your help.
73 Avi
... and?
On 04/26/2025 9:59 AM EDT Bob < k4cy@...> wrote:
?
?
The error message is because your download of the Club Log exception database failed. Try it again. SeventyThree(s).
?
?
Hello,
Asking for your assistance in resolving Pfx?? error, see attached.
Restarting L32 and or PC (W10) doesn't cure the problem.
Thank you
73 Avi 4X1WQ
?
?
?
?
?
|
Re: Please assist with Pfx?? Error - Nothing is populated in Pfx Column just ??
Thank you Bob for your suggestion.
Did the scan?with?Windows CHKDSK utility of Hard Drives? (C) & (E) - no errors were found.
Problem still unresolved.
Bob I?appreciate your time and assistance very much. If you or anyone else have any additional suggestions, I would appreciate it very much.
73 Avi 4X1WQ??
I think you will find the error message pops up when the download of the Club Log exceptions completes, and not when you start VE7CC. This is easy to test.
?
Messages on the Club Log download window verify that the download completed successfully and no data was lost. Then the process of optimizing/compressing the new file starts. This fails (you see the error message).?
?
So why can't Logger32compress the file? Could it be corrupt data on the disk? Try running the Windows CHKDSK utility to look for errors. Other than that, I have no suggestions. SeventyThree(s).
?
?
Hello Bob and thank you for your prompt response.
?
Yesterday after your 1st email, suggesting that "The error message is because your download of the Club Log exception database failed. Try it again.?" I tried 3 more times, but the problem remained.
?
In yesterday's trials I did the following:
?
STEP 1: The very first time in the day when I open L32, the Automatic AUTO UPDATE?process of Club Log exceptions update starts - no Errors are?displayed.
?
STEP 2: Connecting to VE7CC following Error pops up:
?
 ?
 ?
I press OK TAB and exit L32
STEP 3:????Start L32 but this time, NO- Auto Update of Club Log Exceptions updates starts.
STEP 4:? ? I Do manual update of Club Log Exceptions Update, looks OK, no Error shows
STEP 5: I connect to VE7CC - Error pops up and Pfx?? column is populated with ??
Yesterday I repeated steps 3 to 5, three times with the same failure result, so decided to try again next day (today) so the Auto Update of Club Log Exceptions updates process will start first automatically.?
??
Today?I repeated steps 1 to 5, first time, and then additional three times steps 3 to 5, the problem?remained.
?
Thank you very much for your help.
73 Avi
... and?
On 04/26/2025 9:59 AM EDT Bob < k4cy@...> wrote:
?
?
The error message is because your download of the Club Log exception database failed. Try it again. SeventyThree(s).
?
?
Hello,
Asking for your assistance in resolving Pfx?? error, see attached.
Restarting L32 and or PC (W10) doesn't cure the problem.
Thank you
73 Avi 4X1WQ
?
?
?
|
Re: Please assist with Pfx?? Error - Nothing is populated in Pfx Column just ??
I think you will find the error message pops up when the download of the Club Log exceptions completes, and not when you start VE7CC. This is easy to test.
?
Messages on the Club Log download window verify that the download completed successfully and no data was lost. Then the process of optimizing/compressing the new file starts. This fails (you see the error message).?
?
So why can't Logger32compress the file? Could it be corrupt data on the disk? Try running the Windows CHKDSK utility to look for errors. Other than that, I have no suggestions. SeventyThree(s).
On 04/27/2025 12:28 AM EDT Avi 4X1WQ via groups.io <avi.rochman@...> wrote:
?
?
Hello Bob and thank you for your prompt response.
?
Yesterday after your 1st email, suggesting that "The error message is because your download of the Club Log exception database failed. Try it again.?" I tried 3 more times, but the problem remained.
?
In yesterday's trials I did the following:
?
STEP 1: The very first time in the day when I open L32, the Automatic AUTO UPDATE?process of Club Log exceptions update starts - no Errors are?displayed.
?
STEP 2: Connecting to VE7CC following Error pops up:
?
 ?
 ?
I press OK TAB and exit L32
STEP 3:????Start L32 but this time, NO- Auto Update of Club Log Exceptions updates starts.
STEP 4:? ? I Do manual update of Club Log Exceptions Update, looks OK, no Error shows
STEP 5: I connect to VE7CC - Error pops up and Pfx?? column is populated with ??
Yesterday I repeated steps 3 to 5, three times with the same failure result, so decided to try again next day (today) so the Auto Update of Club Log Exceptions updates process will start first automatically.?
??
Today?I repeated steps 1 to 5, first time, and then additional three times steps 3 to 5, the problem?remained.
?
Thank you very much for your help.
73 Avi
... and?
On 04/26/2025 9:59 AM EDT Bob < k4cy@...> wrote:
?
?
The error message is because your download of the Club Log exception database failed. Try it again. SeventyThree(s).
?
?
Hello,
Asking for your assistance in resolving Pfx?? error, see attached.
Restarting L32 and or PC (W10) doesn't cure the problem.
Thank you
73 Avi 4X1WQ
?
?
?
|
Re: Please assist with Pfx?? Error - Nothing is populated in Pfx Column just ??
Hello Bob and thank you for your prompt response.
Yesterday after your 1st email, suggesting that "The error message is because your download of the Club Log exception database failed. Try it again.?" I tried 3 more times, but the problem remained.
In yesterday's trials I did the following:
STEP 1: The very first time in the day when I open L32, the Automatic AUTO UPDATE?process of Club Log exceptions update starts - no Errors are?displayed.
STEP 2: Connecting to VE7CC following Error pops up: ?  ?  ? I press OK TAB and exit L32 STEP 3:????Start L32 but this time, NO- Auto Update of Club Log Exceptions updates starts. STEP 4:? ? I Do manual update of Club Log Exceptions Update, looks OK, no Error shows 
STEP 5: I connect to VE7CC - Error pops up and Pfx?? column is populated with ??
Yesterday I repeated steps 3 to 5, three times with the same failure result, so decided to try again next day (today) so the Auto Update of Club Log Exceptions updates process will start first automatically.? ?? Today?I repeated steps 1 to 5, first time, and then additional three times steps 3 to 5, the problem?remained.
Thank you very much for your help. 73 Avi
... and?
On 04/26/2025 9:59 AM EDT Bob < k4cy@...> wrote:
?
?
The error message is because your download of the Club Log exception database failed. Try it again. SeventyThree(s).
?
?
Hello,
Asking for your assistance in resolving Pfx?? error, see attached.
Restarting L32 and or PC (W10) doesn't cure the problem.
Thank you
73 Avi 4X1WQ
?
|
Re: Please assist with Pfx?? Error - Nothing is populated in Pfx Column just ??
toggle quoted message
Show quoted text
On 04/26/2025 9:59 AM EDT Bob <k4cy@...> wrote:
?
?
The error message is because your download of the Club Log exception database failed. Try it again. SeventyThree(s).
On 04/26/2025 9:42 AM EDT Avi 4X1WQ via groups.io <avi.rochman@...> wrote:
?
?
Hello,
Asking for your assistance in resolving Pfx?? error, see attached.
Restarting L32 and or PC (W10) doesn't cure the problem.
Thank you
73 Avi 4X1WQ
?
|
Re: Please assist with Pfx?? Error - Nothing is populated in Pfx Column just ??
The error message is because your download of the Club Log exception database failed. Try it again. SeventyThree(s).
On 04/26/2025 9:42 AM EDT Avi 4X1WQ via groups.io <avi.rochman@...> wrote:
?
?
Hello,
Asking for your assistance in resolving Pfx?? error, see attached.
Restarting L32 and or PC (W10) doesn't cure the problem.
Thank you
73 Avi 4X1WQ
?
|
Please assist with Pfx?? Error - Nothing is populated in Pfx Column just ??
Hello, Asking for your assistance in resolving Pfx?? error, see attached. Restarting L32 and or PC (W10) doesn't cure the problem. Thank you 73 Avi 4X1WQ
|
Re: Logger Radio Configuration for Yaesu FT-891
For the FTdx1200 for years I've used the FT2000 CAT settings with no problems.
|
Re: Logger 32 telnet problem
I connect to the VE7CC cluster, using the internal telnet and have no problems. Was working fine the other day anyway.
|
Re: Logger 32 telnet problem
Had the same problem changed to another cluster all ok and yet to change back? Ron G6GA?
toggle quoted message
Show quoted text
On 24 Apr 2025, at 8:14?pm, n5kd via groups.io <n5kd@...> wrote:
?
Mark,
I'd suggest using the VE7CC user program as a front end, then get
L32 to connect to VE7CC.
73' Pete, N5KD.
On 4/24/2025 16:40, Mark M0UTD via
groups.io wrote:
Hi
all
Has
anyone had any issues with losing telnet connection using
logger 32 ? I have tried various servers but still cannot get
a connection on the bottom task bar i have previously never
had any issues but now i am racking my brains and can¡¯t find
an answer, it maybe firewall related but i have changed
nothing on my laptop it also does not work on my back up
laptop neither which also used to work with no problem
Any
ideas welcome
Regards
Mark
M0UTD
|
Re: Logger 32 telnet problem
Mark,
I'd suggest using the VE7CC user program as a front end, then get
L32 to connect to VE7CC.
73' Pete, N5KD.
On 4/24/2025 16:40, Mark M0UTD via
groups.io wrote:
toggle quoted message
Show quoted text
Hi
all
Has
anyone had any issues with losing telnet connection using
logger 32 ? I have tried various servers but still cannot get
a connection on the bottom task bar i have previously never
had any issues but now i am racking my brains and can¡¯t find
an answer, it maybe firewall related but i have changed
nothing on my laptop it also does not work on my back up
laptop neither which also used to work with no problem
Any
ideas welcome
Regards
Mark
M0UTD
|
Re: Logger 32 telnet problem
Check with your Internet service provider, maybe they have started blocking telnet due to it being insecure.
?
Good luck, N0NC
?
|
Avi 4X1WQ
ZL2iFB
Rick Williams - VE7TK
DamianM0BKV