No it is any slot I check, tried it on a different award and still no QSO's
?
toggle quoted message
Show quoted text
----- Original Message -----
Sent: 22/07/2021 16:46:15
Subject: Re: [hamlogger] Generic QSO Window
... and, is it just 15m/3B8 that returns no QSOs, or are there no QSOs regardless of the band/prefix? 73.
On 07/22/2021 11:40 AM g4girhb0 via groups.io <ian.frith@...> wrote:
I see this on the one that don't Work and a good one :-
All Operators : QSOs with 3B8 [Mauritius Island] on 15m Mixed Mode. QSL and LOTW confirmations, All credits.
----- Original Message -----
Sent: 22/07/2021 16:30:51
Subject: Re: [hamlogger] Generic QSO Window
OK, so tell me what you do see. 73.
On 07/22/2021 11:25 AM G4GIR via groups.io <i.frith@...> wrote:
Hello Bob
I can't see any difference in the Caption between the windows which work and the one that doesn't, apart from the selections i.e All Operators or just me.
iAN
----- Original Message -----
Sent: 22/07/2021 15:10:06
Subject: Re: [hamlogger] Generic QSO Window
On the configuration that doesn't work, is the generic?QSOs window caption correct? 73.
On 07/22/2021 9:57 AM G4GIR via groups.io <i.frith@...> wrote:
I have a problem with the Generic QSO Window not showing any QSO's when left clicking a confirmation box in the DXCC Awards window.
I have 6 different Configuration start ups for different rigs JTDX etc. All the configurations WORK OK when clicking a confirmation box in the DXCC Awards window (i.e the QSO'S appear) except? one? configuration, where no QSO's appear.
I am guessing this could be a problem in the configurations .ini file?
Any Ideas please.
73
Ian G4GIR
|
... and, is it just 15m/3B8 that returns no QSOs, or are there no QSOs regardless of the band/prefix? 73.
On 07/22/2021 11:40 AM g4girhb0 via groups.io <ian.frith@...> wrote:
?
?
I see this on the one that don't Work and a good one :-
?
All Operators : QSOs with 3B8 [Mauritius Island] on 15m Mixed Mode. QSL and LOTW confirmations, All credits.
----- Original Message -----
Sent: 22/07/2021 16:30:51
Subject: Re: [hamlogger] Generic QSO Window
OK, so tell me what you do see. 73.
On 07/22/2021 11:25 AM G4GIR via groups.io <i.frith@...> wrote:
?
?
Hello Bob
?
I can't see any difference in the Caption between the windows which work and the one that doesn't, apart from the selections i.e All Operators or just me.
?
iAN
?
----- Original Message -----
Sent: 22/07/2021 15:10:06
Subject: Re: [hamlogger] Generic QSO Window
On the configuration that doesn't work, is the generic?QSOs window caption correct? 73.
On 07/22/2021 9:57 AM G4GIR via groups.io <i.frith@...> wrote:
?
?
I have a problem with the Generic QSO Window not showing any QSO's when left clicking a confirmation box in the DXCC Awards window.
I have 6 different Configuration start ups for different rigs JTDX etc. All the configurations WORK OK when clicking a confirmation box in the DXCC Awards window (i.e the QSO'S appear) except? one? configuration, where no QSO's appear.
I am guessing this could be a problem in the configurations .ini file?
Any Ideas please.
73
Ian G4GIR
|
I see this on the one that don't Work and a good one :-
?
All Operators : QSOs with 3B8 [Mauritius Island] on 15m Mixed Mode. QSL and LOTW confirmations, All credits.
toggle quoted message
Show quoted text
----- Original Message -----
Sent: 22/07/2021 16:30:51
Subject: Re: [hamlogger] Generic QSO Window
OK, so tell me what you do see. 73.
On 07/22/2021 11:25 AM G4GIR via groups.io <i.frith@...> wrote:
Hello Bob
I can't see any difference in the Caption between the windows which work and the one that doesn't, apart from the selections i.e All Operators or just me.
iAN
----- Original Message -----
Sent: 22/07/2021 15:10:06
Subject: Re: [hamlogger] Generic QSO Window
On the configuration that doesn't work, is the generic?QSOs window caption correct? 73.
On 07/22/2021 9:57 AM G4GIR via groups.io <i.frith@...> wrote:
I have a problem with the Generic QSO Window not showing any QSO's when left clicking a confirmation box in the DXCC Awards window.
I have 6 different Configuration start ups for different rigs JTDX etc. All the configurations WORK OK when clicking a confirmation box in the DXCC Awards window (i.e the QSO'S appear) except? one? configuration, where no QSO's appear.
I am guessing this could be a problem in the configurations .ini file?
Any Ideas please.
73
Ian G4GIR
|
OK, so tell me what you do see. 73.
On 07/22/2021 11:25 AM G4GIR via groups.io <i.frith@...> wrote:
?
?
Hello Bob
?
I can't see any difference in the Caption between the windows which work and the one that doesn't, apart from the selections i.e All Operators or just me.
?
iAN
?
----- Original Message -----
Sent: 22/07/2021 15:10:06
Subject: Re: [hamlogger] Generic QSO Window
On the configuration that doesn't work, is the generic?QSOs window caption correct? 73.
On 07/22/2021 9:57 AM G4GIR via groups.io <i.frith@...> wrote:
?
?
I have a problem with the Generic QSO Window not showing any QSO's when left clicking a confirmation box in the DXCC Awards window.
I have 6 different Configuration start ups for different rigs JTDX etc. All the configurations WORK OK when clicking a confirmation box in the DXCC Awards window (i.e the QSO'S appear) except? one? configuration, where no QSO's appear.
I am guessing this could be a problem in the configurations .ini file?
Any Ideas please.
73
Ian G4GIR
|
Hello Bob
?
I can't see any difference in the Caption between the windows which work and the one that doesn't, apart from the selections i.e All Operators or just me.
?
iAN
?
toggle quoted message
Show quoted text
----- Original Message -----
Sent: 22/07/2021 15:10:06
Subject: Re: [hamlogger] Generic QSO Window
On the configuration that doesn't work, is the generic?QSOs window caption correct? 73.
On 07/22/2021 9:57 AM G4GIR via groups.io <i.frith@...> wrote:
I have a problem with the Generic QSO Window not showing any QSO's when left clicking a confirmation box in the DXCC Awards window.
I have 6 different Configuration start ups for different rigs JTDX etc. All the configurations WORK OK when clicking a confirmation box in the DXCC Awards window (i.e the QSO'S appear) except? one? configuration, where no QSO's appear.
I am guessing this could be a problem in the configurations .ini file?
Any Ideas please.
73
Ian G4GIR
|
On the configuration that doesn't work, is the generic?QSOs window caption correct? 73.
On 07/22/2021 9:57 AM G4GIR via groups.io <i.frith@...> wrote:
?
?
I have a problem with the Generic QSO Window not showing any QSO's when left clicking a confirmation box in the DXCC Awards window.
I have 6 different Configuration start ups for different rigs JTDX etc. All the configurations WORK OK when clicking a confirmation box in the DXCC Awards window (i.e the QSO'S appear) except? one? configuration, where no QSO's appear.
I am guessing this could be a problem in the configurations .ini file?
Any Ideas please.
73
Ian G4GIR
|
I have a problem with the Generic QSO Window not showing any QSO's when left clicking a confirmation box in the DXCC Awards window.
I have 6 different Configuration start ups for different rigs JTDX etc. All the configurations WORK OK when clicking a confirmation box in the DXCC Awards window (i.e the QSO'S appear) except? one? configuration, where no QSO's appear.
I am guessing this could be a problem in the configurations .ini file?
Any Ideas please.
73
Ian G4GIR
|
Generic QSO Window Problem
I have a problem with the?
|
Re: Update: Cherry picking
Hi Jay, I na using JTDX for FT4/FT8 and cherry picking from L32 working fine with station calling CQ, station sending 73 (RR73), new grids, new ones etc. 73 Martin OK1WCF ______________________________________________________________ Od: "F4CVO" <f4cvo@...>
Komu: [email protected]
Datum: 21.07.2021 15:28
P?edmět: Re: [hamlogger] Update: Cherry picking
The cherry-picking work again but only with the stations calling CQ, he didn’t work for the grid square…?73 qro?Jay F4CVOEnvoyé de mon iPhoneLe 20 juil. 2021 à 22:48, Bob <k4cy@...> a écrit?:? Can you describe 'doesn't work anymore' please. SeventyThree(s). On 07/19/2021 10:55 PM F4CVO <f4cvo@...> wrote: ? ? Hi everyone, Just before the update, I discovered the cherry-picking. It was worked on MSHV software, and without make something, cherry-picking didn’t work anymore.? 73 Jay F4CVO ? Le 20 juil. 2021 à 03:26, Howard McVay <kd7ma.ae@...> a écrit?: Just discovered that,? in JTDX, the "AutoTx" button needs to be enabled for Logger32 Cherry Picking to work.? Guess I inadvertently toggled it off somehow.? Nothing to do with Logge32 update.? Might there be a similar setting in WSJT-X?? At least for me, puzzle solved.
|
Re: Update: Cherry picking
Friday last week I released v4.0.269. I also put this message on the reflector:
?
For those who use the FT4/8 cherry-picker, there is a new option added. On the UDP BandMap click CONFIG | CHERRY_PICKING OPTIONS. There is a new option to enable sympathy calls to stations sending 73/RR73. With the option UNchecked, Logger32 will only call a station sending 73 or RR73 is it is a new band/mode/gridsquare. With the option checked, Logger32 will call anyone sending 73 or RR73 if the station has not been contacted this band/mode before.?I have not tested this?option with WSJT, but I suspect it may work on FT4 and almost certainly not work on FT8.
?
Also, on the cherry-picking event viewer window, under the CONFIG menu there is a new color selection option to change?the text color of the 'QSO ended with 73/RR73' message.
?
Finally, there is a minor change to the TUNE menu of the CW Machine. It now turns itself off after 30 seconds.
?
Please read the red text. I assume MSHV works the same way as WSJT.
SeventyThree(s).
On 07/21/2021 9:27 AM F4CVO <f4cvo@...> wrote:
?
?
The cherry-picking work again but only with the stations calling CQ, he didn’t work for the grid square…?
73 qro?
Jay F4CVO
Envoyé de mon iPhone
Le 20 juil. 2021 à 22:48, Bob <k4cy@...> a écrit?:
Can you describe 'doesn't work anymore' please. SeventyThree(s).
On 07/19/2021 10:55 PM F4CVO <f4cvo@...> wrote:
?
?
Hi everyone,
Just before the update, I discovered the cherry-picking. It was worked on MSHV software, and without make something, cherry-picking didn’t work anymore.?
73 Jay F4CVO
?
Le 20 juil. 2021 à 03:26, Howard McVay <kd7ma.ae@...> a écrit?:
Just discovered that,? in JTDX, the "AutoTx" button needs to be enabled for Logger32 Cherry Picking to work.? Guess I inadvertently toggled it off somehow.? Nothing to do with Logge32 update.? Might there be a similar setting in WSJT-X?? At least for me, puzzle solved.
|
Re: Update: Cherry picking
Jay
Use JTDX. It supports everything.
------ Original message ------
Date: 2021/07/21 22:27:59
Subject Re: [hamlogger] Update: Cherry picking
The cherry-picking work again but only with the stations calling CQ, he didn’t work for the grid square…?73 qro? Jay F4CVO Envoyé de mon iPhone Le 20 juil. 2021 à 22:48, Bob <k4cy@...> a écrit?:
?
Can you describe 'doesn't work anymore' please. SeventyThree(s).
On 07/19/2021 10:55 PM F4CVO < f4cvo@...> wrote:
?
?
Hi everyone,
Just before the update, I discovered the cherry-picking. It was worked on MSHV software, and without make something, cherry-picking didn’t work anymore.?
73 Jay F4CVO
?
Le 20 juil. 2021 à 03:26, Howard McVay <kd7ma.ae@...> a écrit?:
Just discovered that,? in JTDX, the "AutoTx" button needs to be enabled for Logger32 Cherry Picking to work.? Guess I inadvertently toggled it off somehow.? Nothing to do with Logge32 update.? Might there be a similar setting in WSJT-X?? At least for me, puzzle solved.
|
Re: Update: Cherry picking
The cherry-picking work again but only with the stations calling CQ, he didn’t work for the grid square…? 73 qro? Jay F4CVO Envoyé de mon iPhone
toggle quoted message
Show quoted text
Le 20 juil. 2021 à 22:48, Bob <k4cy@...> a écrit?:
?
Can you describe 'doesn't work anymore' please. SeventyThree(s).
On 07/19/2021 10:55 PM F4CVO <f4cvo@...> wrote:
?
?
Hi everyone,
Just before the update, I discovered the cherry-picking. It was worked on MSHV software, and without make something, cherry-picking didn’t work anymore.?
73 Jay F4CVO
?
Le 20 juil. 2021 à 03:26, Howard McVay <kd7ma.ae@...> a écrit?:
Just discovered that,? in JTDX, the "AutoTx" button needs to be enabled for Logger32 Cherry Picking to work.? Guess I inadvertently toggled it off somehow.? Nothing to do with Logge32 update.? Might there be a similar setting in WSJT-X?? At least for me, puzzle solved.
|
Re: Update: Cherry picking
Can you describe 'doesn't work anymore' please. SeventyThree(s).
On 07/19/2021 10:55 PM F4CVO <f4cvo@...> wrote:
?
?
Hi everyone,
Just before the update, I discovered the cherry-picking. It was worked on MSHV software, and without make something, cherry-picking didn’t work anymore.?
73 Jay F4CVO
?
Le 20 juil. 2021 à 03:26, Howard McVay <kd7ma.ae@...> a écrit?:
Just discovered that,? in JTDX, the "AutoTx" button needs to be enabled for Logger32 Cherry Picking to work.? Guess I inadvertently toggled it off somehow.? Nothing to do with Logge32 update.? Might there be a similar setting in WSJT-X?? At least for me, puzzle solved.
|
Re: Update: Cherry picking
Jay
Cherry picking worked with MSHV before Logger32 update. Is this correct ?? If so something changed in UDP BandMap settings. Check all options first.
------ Original message ------
Date: 2021/07/20 11:55:12
Subject Re: [hamlogger] Update: Cherry picking
Hi everyone,Just before the update, I discovered the cherry-picking. It was worked on MSHV software, and without make something, cherry-picking didn’t work anymore.? 73 Jay F4CVO
Le 20 juil. 2021 à 03:26, Howard McVay <kd7ma.ae@...> a écrit?:
?Just discovered that,? in JTDX, the "AutoTx" button needs to be enabled for Logger32 Cherry Picking to work.? Guess I inadvertently toggled it off somehow.? Nothing to do with Logge32 update.? Might there be a similar setting in WSJT-X?? At least for me, puzzle solved.
|
Re: Update: Cherry picking
Hi everyone, Just before the update, I discovered the cherry-picking. It was worked on MSHV software, and without make something, cherry-picking didn’t work anymore.?
toggle quoted message
Show quoted text
Le 20 juil. 2021 à 03:26, Howard McVay <kd7ma.ae@...> a écrit?:
?Just discovered that,? in JTDX, the "AutoTx" button needs to be enabled for Logger32 Cherry Picking to work.? Guess I inadvertently toggled it off somehow.? Nothing to do with Logge32 update.? Might there be a similar setting in WSJT-X?? At least for me, puzzle solved.
|
Just discovered that,? in JTDX, the "AutoTx" button needs to be enabled for Logger32 Cherry Picking to work.? Guess I inadvertently toggled it off somehow.? Nothing to do with Logge32 update.? Might there be a similar setting in WSJT-X?? At least for me, puzzle solved.
|
And….. on the right hand side of the front screen, check the AutoTX button is green. ? Sent from for Windows 10 ?
toggle quoted message
Show quoted text
From: BobSent: Monday, July 19, 2021 16:51 To: [email protected]Subject: Re: [hamlogger] Cherry picking ? On JTDX click FILE | SETTINGS. Click the REPORTING tab. Make sure ACCEPT UDP REQUESTS is checked. Click OK. On JTDX Click MISC | ACCEPT UDP REPLY MESSAGES. Make sure ANY MESSAGE is checked. On 07/19/2021 12:31 PM Howard McVay <kd7ma.ae@...> wrote: I too experience this behavior using JTDX v156.? ?This began shortly after I updated Logger32 to V4.0.469.? Nothing else has changed (to my knowledge) in a while.
In the Cherry Picking Event viewer,? I see the following:? ?Note the message "JTDX did not switch to transmit".? I've verified JTDX works normally with manual activation of Txd.
Howard KD7MA
|
On JTDX click FILE | SETTINGS. Click the REPORTING tab. Make sure ACCEPT UDP REQUESTS is checked. Click OK.
?
On JTDX Click MISC | ACCEPT UDP REPLY MESSAGES. Make sure ANY MESSAGE is checked.
?
SeventyThree(s)
On 07/19/2021 12:31 PM Howard McVay <kd7ma.ae@...> wrote:
?
?
I too experience this behavior using JTDX v156.? ?This began shortly after I updated Logger32 to V4.0.469.? Nothing else has changed (to my knowledge) in a while.
In the Cherry Picking Event viewer,? I see the following:? ?Note the message "JTDX did not switch to transmit".? I've verified JTDX works normally with manual activation of Txd.
Howard KD7MA
|
I too experience this behavior using JTDX v156.? ?This began shortly after I updated Logger32 to V4.0.469.? Nothing else has changed (to my knowledge) in a while. In the Cherry Picking Event viewer,? I see the following:? ?Note the message "JTDX did not switch to transmit".? I've verified JTDX works normally with manual activation of Txd.  Howard KD7MA
|
Thanks for the update Bob. I hope Jim gets better soon. We all miss him, his calm demeanor and his expertise!
Get well soon Jim!
73, Rick
VE7TK
|
F4CVO
Rick Williams - VE7TK