Does your Logger32 know what 60m is? I just looked, and there is no 60m in my version. SeventyThree(s).
On 05/16/2025 1:58 AM EDT IK6CGO via groups.io <ik6cgo@...> wrote:
?
?
Hi,?
Logger32 version 4.0.336
L32LogSyncg version ?2.019.8
JTDX v2.2.160-rc7-d2
LogSync flagged with Auto Upload qsos to Lotw upon qso completion.
Same flag with Auto Upload qsos to ClubLog upon qso completion
So all qsos are always uploaded to Lotw and ClubLog without problems at the end of the qso
A popup appears when I work on 60 meters:
I am about to reset the complex keys in the database and have temporarily lost track of data for your QSO with (call station worked) on FT8. dbBusy flag is set to False. I have not modified your logbook. Please try this again
The qso is not uploaded to Lotw and ClubLog but is recorded on Logger32
Well... I change band, I do not touch anything on Logger32 or on L32LogSynch, I make the qso and at the end the qso is uploaded regularly on Lotw and Clublog
I change the band again, I go back to 60 meters and the same issue occurs, the qso make on 60 meter is not uploaded to Lotw and ClubLog
The issue only occurs when I'm working in 60 meters
Unfortunately I have not tested with WSJTX
What should I do to solve the problem?
Many thanks and best 73 de Gianni IK6CGO
?
|
Hi,?
Logger32 version 4.0.336
L32LogSyncg version ?2.019.8
JTDX v2.2.160-rc7-d2
LogSync flagged with Auto Upload qsos to Lotw upon qso completion.
Same flag with Auto Upload qsos to ClubLog upon qso completion
So all qsos are always uploaded to Lotw and ClubLog without problems at the end of the qso
A popup appears when I work on 60 meters:
I am about to reset the complex keys in the database and have temporarily lost track of data for your QSO with (call station worked) on FT8. dbBusy flag is set to False. I have not modified your logbook. Please try this again
The qso is not uploaded to Lotw and ClubLog but is recorded on Logger32
Well... I change band, I do not touch anything on Logger32 or on L32LogSynch, I make the qso and at the end the qso is uploaded regularly on Lotw and Clublog
I change the band again, I go back to 60 meters and the same issue occurs, the qso make on 60 meter is not uploaded to Lotw and ClubLog
The issue only occurs when I'm working in 60 meters
Unfortunately I have not tested with WSJTX
What should I do to solve the problem?
Many thanks and best 73 de Gianni IK6CGO
?
|
Re: Macros before starting JTDX
It looks like there is a timing problem. Looking at the radio debug window, I see manual start of JTDX? by clicking the menu it shows a line Sent $command blah;blah;blah;$' then another line Direct radio command blah;blah;blah;? The first line says the macro is queued to be sent. The second line says it has been sent to the radio.
?
With quick switch enabled, and clicking on an FT8 DX Spot, the Direct radio command is not sent before the port is closed.
?
I will make changes for the next auto-update.?
?
?
On 05/15/2025 1:19 AM EDT Vytas VQ via groups.io <v.kudelis@...> wrote:
?
?
Hello, when I start JTDX from UDP, the written macros work. If I start JTDX from DX Spot, the macros do not work. Delay after starting JTDX does not affect this.
Thanks!
73?? Vytas?? LZ2VQ
|
Re: Macros before starting JTDX
Hi Aki.? You misunderstood me. JTDX starts, but macros don't run.
73??? Vytas? LZ2VQ
2025-05-15 08:24, ja1nlx via groups.io:
toggle quoted message
Show quoted text
Vytas
This macro does nothing when you click DX spot.
If you want, then "Quick switch" option should be enabled.
On 2025-05-15 ľ
14:19:10, Vytas VQ via groups.io
<v.kudelis@...> wrote:
Hello, when I start JTDX from UDP, the written macros
work. If I start JTDX from DX Spot, the macros do not
work. Delay after starting JTDX does not affect this.
Thanks!
73?? Vytas?? LZ2VQ
|
Re: Macros before starting JTDX
Vytas This macro does nothing when you click DX spot. If you want, then "Quick switch" option should be enabled.
On 2025-05-15 ľ 14:19:10, Vytas VQ via groups.io <v.kudelis@...> wrote:
Hello, when I start JTDX from UDP, the written macros work. If I
start JTDX from DX Spot, the macros do not work. Delay after
starting JTDX does not affect this.
Thanks!
73?? Vytas?? LZ2VQ
|
Macros before starting JTDX
Hello, when I start JTDX from UDP, the written macros work. If I
start JTDX from DX Spot, the macros do not work. Delay after
starting JTDX does not affect this.
Thanks!
73?? Vytas?? LZ2VQ
|
Not for GEN, or some VHF/UHF/uWave bands. Too many lines to draw on the graticule. SeventyThree(s).
?On 05/14/2025 3:20 PM EDT Gerry VE6LB via groups.io <ve6lb@...> wrote:
?
?
Is there a way to get the MON BandMap to show a frequencies scale?
?
Gerry VE6LB
|
Is there a way to get the MON BandMap to show a frequencies scale?
?
Gerry VE6LB
|
Re: soemtimes Flex (SmartSDR) and logger lose each other
Hi Frank and Oom Bob. (It is a South African thing)
First of all. I believe Logger32 is by far the best out there. I am a devoted Icom man having had Icoms all my life, but I changed to Flex to see how it is...I will never turn back but I still love Icoms too.
Ok I will from now on start Smart SDR first then Logger32 .? I also changed? the radio setup from Power SDR to Smart SDR..
Thanks Bob I enabled the Error Trapping.
Lets roll and see how it goes.
Thanks to all.
ZS1A
|
Logger32 on cloud server ??
Hi,
?
I?m just wondering if there is a configuration option to run Logger32 locally but keep the data files in any remote or could server.
That would allow us to run Logger32 on any device, computer or even mobile phone, and access the same and unique log data file.
?
Thank you
73, Maximo EA1DDO
|
The home of Lakka. How could I forget.
?
Shows how much DX I work. Anyway, we're only interested in Greenland, Canada and the Panama Canal. You're safe. SeventyThree(s).
On 05/10/2025 11:32 AM EDT Markku OH2BLV via groups.io <markku.vanonen@...> wrote:
?
?
"OH" is FINLAND, HI
|
|
|
You might want to experiment with changing the Regional settings on the PC to something other than standard Norway. SeventyThree(s).
On 05/10/2025 9:58 AM EDT Markku OH2BLV via groups.io <markku.vanonen@...> wrote:
?
?
I tried changing the time of the old QSO, it worked correctly. Then I opened the ADD QSO MANUALLY function, where the TIME was now correct. I opened the laptop and that also seemed to work correctly NOW. I am surprised. The computers are not connected to each other.
|
I tried changing the time of the old QSO, it worked correctly. Then I opened the ADD QSO MANUALLY function, where the TIME was now correct. I opened the laptop and that also seemed to work correctly NOW. I am surprised. The computers are not connected to each other.
|
I have tried all time formats with and without seconds. The problem seems to have started when the QSO time correction function was enabled.
?
|
What time format have you setup (click SETUP | TIME FORMAT), and are you setup for showing seconds or not? SeventyThree(s).
On 05/10/2025 4:53 AM EDT Markku OH2BLV via groups.io <markku.vanonen@...> wrote:
?
?
When I log new QSO, sometimes the log time becomes 00.00.00, even though the computer and logger clock (bottom left corner) show the correct time.
The same problem occurs in the TIME window (00,00,00) when I start " ADD QSOS MANUALLY".
Same problem on two different PCs.
What could be wrong?
|
|
|
|
|
Try right clicking on the call field in the log entry window then setup -> qso start time and check callsign field loses focus.
73, Frank GI4NKB
On Saturday, May 10, 2025 at 09:53:16 AM GMT+1, Markku OH2BLV via groups.io <markku.vanonen@...> wrote:
When I log new QSO, sometimes the log time becomes 00.00.00, even though the computer and logger clock (bottom left corner) show the correct time.
The same problem occurs in the TIME window (00,00,00) when I start " ADD QSOS MANUALLY".
Same problem on two different PCs.
What could be wrong?
|
When I log new QSO, sometimes the log time becomes 00.00.00, even though the computer and logger clock (bottom left corner) show the correct time.
The same problem occurs in the TIME window (00,00,00) when I start " ADD QSOS MANUALLY".
Same problem on two different PCs.
What could be wrong?
|
IK6CGO
Maximo EA1DDO - M0HAO - HK1H
