Logger32 auto-update v4.0.337 is on-line
Fixes/changes for this release?include:
?
Fixed a bug on the WAZ award window where Confirmed/Granted zones were not showing correctly.
?
If the Slave port is configured for Kenwood radio, the FR0; command (Set VFO-A) is no longer sent with the frequency when the primary radio is QSYd.
?
The menus on the Tracking Window and NCDXF Beacons Windows to select Miller cylindrical projection maps have been changed to Equidistant cylindrical Projection. No need to change the maps, it is just the menu captions that were wrong.
?
Ver 4.0.54 of the CW Machine is included in this update. It corrects a typographical error on the Software keyer setup window.
?
Previously the Shift+DX Spot click to send the frequency to VFO-B or the SO2R only worked for the DX Spot Window and the BandMap. Changes have been made so it now works with?the Monitor BandMaps as well. Also, you can use Shift+DX Spot click, Ctrl+DX Spot click, or Alt+DX Spot click.
?
Added a 'Dark Mode' theme to the Logbook Entry Window.
For DXpedition alerts that do not provide IOTA information, and the IOTA can not be derived from the prefix, Try this practical example to address the problem. Look at the DXpeditionsxx.txt file for April (or May) and you will see an entry for TX9A^45772^45777^https://www.dx-world.net/tx9a-austral-islands-dxpedition-202/ for the current?Austral Island DXpadition. There is no information about what IOTA this is. If you Google //www.dx-world.net/tx9a-austral-islands-dxpedition-202/ you will see the DXpedition is on OC-152. Edit the entry to add the IOTA like this TX9A^45772^45777^https://www.dx-world.net/tx9a-austral-islands-dxpedition-202/"OC-152 Save the change. For the duration?of the DXpedition, Logger32 knows where the IOTA of the TX8A DX Spot is, and will log QSOs with the IOTA, and show TX8A on the IOTA DX Spot map. NOTE: The first character of the red text is a circumflex or caret. ASCII 94.
And remember to backup, backup,, and backup again. Enjoy.
|
Re: Problems with lagging / MMTTY engine
Sounds to me like the PC periodically needs to take a time out to page fault, swap memory, or do some other high priority housekeeping.
?
Have you tries using MMVari set to RTTY? What is the % memory utilization when the problem occurs? What is the disk activity when the problem occurs?
?
I just made five quick dummy RTTY QSOs with MMTTY, and no problem with freezing/lagging. SeventyThree(s).
On 04/30/2025 10:04 AM EDT Peter Koch via groups.io <pk@...> wrote:
?
?
Hi Group,
?
Just curious to know... Anyone who have experienced that the software is lagging...??
?
I have the latest version of the software, and when I'm running RTTY with the MMTTY engine embedded, I frequently encounter lagging.
Everything freezes, buttons, spectrogram, everything for say 10-15 seconds, and then it resumes into normal operation. Despite that an ongoing transmission of a macro continues, it is absolutely annoying in a contest.
It happens randomly, but it seems that when I right click the mouse to enter serial number, QTH, locator, etc., it often triggers a lag -- not every time, but often.
?
I have tried to monitor the CPU load for Logger32 (i5 processor), and it is quite high (30-40%) when the event occurs.
I'm using the microHAM DXP interface attached via USB to the PC. The rig is a Kenwood TS-870 also connected to the DXP via RS-232.
?
The problem only occurs when running the MMTTY engine in Logger32. Running MMTTY as stand alone, everything works flawlessly. Similarly, no problems at all when running fldigi or WSJT.
?
Any idea...??
?
Thanks in advance.
?
Best 73 de OZ1LFI, Peter
|
Problems with lagging / MMTTY engine
Hi Group,
?
Just curious to know... Anyone who have experienced that the software is lagging...??
?
I have the latest version of the software, and when I'm running RTTY with the MMTTY engine embedded, I frequently encounter lagging.
Everything freezes, buttons, spectrogram, everything for say 10-15 seconds, and then it resumes into normal operation. Despite that an ongoing transmission of a macro continues, it is absolutely annoying in a contest.
It happens randomly, but it seems that when I right click the mouse to enter serial number, QTH, locator, etc., it often triggers a lag -- not every time, but often.
?
I have tried to monitor the CPU load for Logger32 (i5 processor), and it is quite high (30-40%) when the event occurs.
I'm using the microHAM DXP interface attached via USB to the PC. The rig is a Kenwood TS-870 also connected to the DXP via RS-232.
?
The problem only occurs when running the MMTTY engine in Logger32. Running MMTTY as stand alone, everything works flawlessly. Similarly, no problems at all when running fldigi or WSJT.
?
Any idea...??
?
Thanks in advance.
?
Best 73 de OZ1LFI, Peter
|
Re: Logger Radio Configuration for Yaesu FT-891
Observant as usual Bob. 4SEC is a bit slow but there are times when its nice to have it slow, like when it keeps interrupting something. normally I set it to 1sec.
Damian
|
Re: Logger Radio Configuration for Yaesu FT-891
Polling looks a little slow to me. SeventyThree(s).
On 04/29/2025 10:36 AM EDT DamianM0BKV via groups.io <kammdp@...> wrote:
?
?
Screenshot of config for my FTdx1200
?
?
73 Damian
|
Re: Logger Radio Configuration for Yaesu FT-891
Screenshot of config for my FTdx1200
?
?
73 Damian
|
Re: Logger32 and ... XIEGU G90
Hi
?
Link? at top of page seems to be broken but the one below may be helpfull.
?
?
?
I think 19200 baud and 2 stop bits
Dave
GM4NFI
|
Re: Logger 32 telnet problem
Hi,? you can try connecting to my cluster. I'm using it with logger32 and never had any issues.
port: 7373
Andrea iz2lsc
Il giorno ven 25 apr 2025 alle ore 14:58 Bill Neumann via <billn= [email protected]> ha scritto: I connect to the VE7CC cluster, using the internal telnet and have no problems. Was working fine the other day anyway.
|
Re: Please assist with Pfx?? Error - Nothing is populated in Pfx Column just ?? - PROBLEM SOLVED!!!!
toggle quoted message
Show quoted text
On 04/28/2025 12:02 PM EDT Avi 4X1WQ via groups.io <avi.rochman@...> wrote:
?
?
Hello Bob,
?
Just wanted to notify you that, suggested by you uninstall/reinstall Logger32 simply did the trick and completely cured the problem! Now all works as it should be.
?
THANK YOU very much for the support and AMAZING PROGRAM!
73 Avi
?
?
?
?
Thank you so much Bob for your support and advice.
On 28 Apr 2025, at 12:15, Bob via groups.io <k4cy@...> wrote:
?
Looks like you've done everything as suggested. Before you attempt to uninstall/reinstall Logger32, be sure to save all your logbooks safely in ADIF format. Check that all QSOs have been saved, and keep them safely somewhere off your PC. 73.
On 04/27/2025 11:25 PM EDT Avi 4X1WQ via groups.io <avi.rochman@...> wrote:
Following your suggestion I performed?CHKDSK c: /f - I hope and assume I did it correctly:
a) Command Prompt?with Admin privileges.?
STEP 1: Restarted the PC, and on the screen?was a message that the disk?was examined and errors corrected?before W10 was loaded,?then W10 started loading.
b) PowerShell with Admin privileges. At the prompt type?
STEP 1: Restarted the PC, and on the screen?was a message that the disk?was examined and errors corrected?before W10 was loaded,?then W10 started loading.
Do you think erasing?and reinstalling L32 might cure the problem?
?
I will do it tomorrow morning my local time and report back, been a long day for me¡.
Sorry for misunderstanding, just an average PC user guy¡.
Not quite?he test I had in mind. Start a Command Prompt (or PowerShell) with Admin privileges. At the prompt type CHKDSK c: /f??Use C: for the C drive, and /f to automatically fix any errors,
You might also check that you are not running out fo disk space. Maybe the disk optimization/compression needs more space. I don't know.
Thank you Bob for your suggestion.
Did the scan?with?Windows CHKDSK utility of Hard Drives? (C) & (E) - no errors were found.
Problem still unresolved.
Bob I?appreciate your time and assistance very much.
If you or anyone else have any additional suggestions, I would appreciate it very much.
?
I think you will find the error message pops up when the download of the Club Log exceptions completes, and not when you start VE7CC. This is easy to test.
Messages on the Club Log download window verify that the download completed successfully and no data was lost. Then the process of optimizing/compressing the new file starts. This fails (you see the error message).?
So why can't Logger32compress the file? Could it be corrupt data on the disk? Try running the Windows CHKDSK utility to look for errors. Other than that, I have no suggestions. SeventyThree(s).
Hello Bob and thank you for your prompt response.
Yesterday after your 1st email, suggesting that "The error message is because your download of the Club Log exception database failed. Try it again.?" I tried 3 more times, but the problem remained.
In yesterday's trials I did the following:
STEP 1: The very first time in the day when I open L32, the Automatic AUTO UPDATE?process of Club Log exceptions update starts - no Errors are?displayed.
STEP 2: Connecting to VE7CC following Error pops up:
?
?
?
I press OK TAB and exit L32
STEP 3:????Start L32 but this time, NO- Auto Update of Club Log Exceptions updates starts.
STEP 4:? ? I Do manual update of Club Log Exceptions Update, looks OK, no Error shows
STEP 5: I connect to VE7CC - Error pops up and Pfx?? column is populated with ??
Yesterday I repeated steps 3 to 5, three times with the same failure result, so decided to try again next day (today) so the Auto Update of Club Log Exceptions updates process will start first automatically.?
Today?I repeated steps 1 to 5, first time, and then additional three times steps 3 to 5, the problem?remained.
Thank you very much for your help.
?
On 04/26/2025 9:59 AM EDT Bob <k4cy@...> wrote:
The error message is because your download of the Club Log exception database failed. Try it again. SeventyThree(s).
Asking for your assistance in resolving Pfx?? error, see attached.
Restarting L32 and or PC (W10) doesn't cure the problem.
?
?
?
?
?
?
|
Re: Please assist with Pfx?? Error - Nothing is populated in Pfx Column just ?? - PROBLEM SOLVED!!!!
Hello Bob, ? Just wanted to notify you that, suggested by you uninstall/reinstall Logger32 simply did the trick and completely cured the problem! Now all works as it should be. ? THANK YOU very much for the support and AMAZING PROGRAM! 73 Avi ? 
? ?
toggle quoted message
Show quoted text
From: [email protected] < [email protected]> On Behalf Of Avi 4X1WQ via groups.io Sent: Monday, April 28, 2025 12:36 To: [email protected]Subject: Re: [hamlogger] Please assist with Pfx?? Error - Nothing is populated in Pfx Column just ?? ? Thank you so much Bob for your support and advice.
On 28 Apr 2025, at 12:15, Bob via groups.io <k4cy@...> wrote:
? Looks like you've done everything as suggested. Before you attempt to uninstall/reinstall Logger32, be sure to save all your logbooks safely in ADIF format. Check that all QSOs have been saved, and keep them safely somewhere off your PC. 73. On 04/27/2025 11:25 PM EDT Avi 4X1WQ via groups.io <avi.rochman@...> wrote: Following your suggestion I performed?CHKDSK c: /f - I hope and assume I did it correctly: a) Command Prompt?with Admin privileges.? STEP 1: Restarted the PC, and on the screen?was a message that the disk?was examined and errors corrected?before W10 was loaded,?then W10 started loading. b) PowerShell with Admin privileges. At the prompt type? STEP 1: Restarted the PC, and on the screen?was a message that the disk?was examined and errors corrected?before W10 was loaded,?then W10 started loading. Do you think erasing?and reinstalling L32 might cure the problem? ? I will do it tomorrow morning my local time and report back, been a long day for me¡. Sorry for misunderstanding, just an average PC user guy¡. Not quite?he test I had in mind. Start a Command Prompt (or PowerShell) with Admin privileges. At the prompt type CHKDSK c: /f??Use C: for the C drive, and /f to automatically fix any errors, You might also check that you are not running out fo disk space. Maybe the disk optimization/compression needs more space. I don't know. Thank you Bob for your suggestion. Did the scan?with?Windows CHKDSK utility of Hard Drives? (C) & (E) - no errors were found. Problem still unresolved. Bob I?appreciate your time and assistance very much. If you or anyone else have any additional suggestions, I would appreciate it very much. ? I think you will find the error message pops up when the download of the Club Log exceptions completes, and not when you start VE7CC. This is easy to test. Messages on the Club Log download window verify that the download completed successfully and no data was lost. Then the process of optimizing/compressing the new file starts. This fails (you see the error message).? So why can't Logger32compress the file? Could it be corrupt data on the disk? Try running the Windows CHKDSK utility to look for errors. Other than that, I have no suggestions. SeventyThree(s). Hello Bob and thank you for your prompt response. Yesterday after your 1st email, suggesting that "The error message is because your download of the Club Log exception database failed. Try it again.?" I tried 3 more times, but the problem remained. In yesterday's trials I did the following: STEP 1: The very first time in the day when I open L32, the Automatic AUTO UPDATE?process of Club Log exceptions update starts - no Errors are?displayed. STEP 2: Connecting to VE7CC following Error pops up:
? ? ? I press OK TAB and exit L32
STEP 3:????Start L32 but this time, NO- Auto Update of Club Log Exceptions updates starts.
STEP 4:? ? I Do manual update of Club Log Exceptions Update, looks OK, no Error shows
STEP 5: I connect to VE7CC - Error pops up and Pfx?? column is populated with ?? Yesterday I repeated steps 3 to 5, three times with the same failure result, so decided to try again next day (today) so the Auto Update of Club Log Exceptions updates process will start first automatically.? Today?I repeated steps 1 to 5, first time, and then additional three times steps 3 to 5, the problem?remained. Thank you very much for your help. ? On 04/26/2025 9:59 AM EDT Bob <k4cy@...> wrote: The error message is because your download of the Club Log exception database failed. Try it again. SeventyThree(s). Asking for your assistance in resolving Pfx?? error, see attached. Restarting L32 and or PC (W10) doesn't cure the problem.
? ?
? ?
? ?
|
Re: Please assist with Pfx?? Error - Nothing is populated in Pfx Column just ??
Thank you so much Bob for your support and advice. I will do it. 73 Avi 4X1WQ
toggle quoted message
Show quoted text
On 28 Apr 2025, at 12:15, Bob via groups.io <k4cy@...> wrote:
?
Looks like you've done everything as suggested. Before you attempt to uninstall/reinstall Logger32, be sure to save all your logbooks safely in ADIF format. Check that all QSOs have been saved, and keep them safely somewhere off your PC. 73.
On 04/27/2025 11:25 PM EDT Avi 4X1WQ via groups.io <avi.rochman@...> wrote:
?
?
Hello Bob,
Following your suggestion I performed?CHKDSK c: /f - I hope and assume I did it correctly:
?
a) Command Prompt?with Admin privileges.?
?
STEP 1: Restarted the PC, and on the screen?was a message that the disk?was examined and errors corrected?before W10 was loaded,?then W10 started loading.
STEP 2: Started L32
RESULT: problem remained
?
?
b) PowerShell with Admin privileges. At the prompt type?
?
STEP 1: Restarted the PC, and on the screen?was a message that the disk?was examined and errors corrected?before W10 was loaded,?then W10 started loading.
STEP 2: Started L32
RESULT: problem remained
?
Do you think erasing?and reinstalling L32 might cure the problem?
?
Thank you,?
73 Avi
Thank you Bob,
I will do it tomorrow morning my local time and report back, been a long day for me¡.
Sorry for misunderstanding, just an average PC user guy¡.
73 Avi
?
?
Not quite?he test I had in mind. Start a Command Prompt (or PowerShell) with Admin privileges. At the prompt type CHKDSK c: /f??Use C: for the C drive, and /f to automatically fix any errors,
?
You might also check that you are not running out fo disk space. Maybe the disk optimization/compression needs more space. I don't know.
?
73.
?
?
Thank you Bob for your suggestion.
?
Did the scan?with?Windows CHKDSK utility of Hard Drives? (C) & (E) - no errors were found.
?
Problem still unresolved.
?
Bob I?appreciate your time and assistance very much.
If you or anyone else have any additional suggestions, I would appreciate it very much.
?
73 Avi 4X1WQ??
?
?
?
I think you will find the error message pops up when the download of the Club Log exceptions completes, and not when you start VE7CC. This is easy to test.
?
Messages on the Club Log download window verify that the download completed successfully and no data was lost. Then the process of optimizing/compressing the new file starts. This fails (you see the error message).?
?
So why can't Logger32compress the file? Could it be corrupt data on the disk? Try running the Windows CHKDSK utility to look for errors. Other than that, I have no suggestions. SeventyThree(s).
?
?
Hello Bob and thank you for your prompt response.
?
Yesterday after your 1st email, suggesting that "The error message is because your download of the Club Log exception database failed. Try it again.?" I tried 3 more times, but the problem remained.
?
In yesterday's trials I did the following:
?
STEP 1: The very first time in the day when I open L32, the Automatic AUTO UPDATE?process of Club Log exceptions update starts - no Errors are?displayed.
?
STEP 2: Connecting to VE7CC following Error pops up:
?
<image.png>
?
<image.png>
?
I press OK TAB and exit L32
STEP 3:????Start L32 but this time, NO- Auto Update of Club Log Exceptions updates starts.
STEP 4:? ? I Do manual update of Club Log Exceptions Update, looks OK, no Error shows
<image.png>
STEP 5: I connect to VE7CC - Error pops up and Pfx?? column is populated with ??
Yesterday I repeated steps 3 to 5, three times with the same failure result, so decided to try again next day (today) so the Auto Update of Club Log Exceptions updates process will start first automatically.?
??
Today?I repeated steps 1 to 5, first time, and then additional three times steps 3 to 5, the problem?remained.
?
Thank you very much for your help.
73 Avi
... and?
On 04/26/2025 9:59 AM EDT Bob < k4cy@...> wrote:
?
?
The error message is because your download of the Club Log exception database failed. Try it again. SeventyThree(s).
?
?
Hello,
Asking for your assistance in resolving Pfx?? error, see attached.
Restarting L32 and or PC (W10) doesn't cure the problem.
Thank you
73 Avi 4X1WQ
?
?
?
?
?
?
?
|
Re: Please assist with Pfx?? Error - Nothing is populated in Pfx Column just ??
Looks like you've done everything as suggested. Before you attempt to uninstall/reinstall Logger32, be sure to save all your logbooks safely in ADIF format. Check that all QSOs have been saved, and keep them safely somewhere off your PC. 73.
On 04/27/2025 11:25 PM EDT Avi 4X1WQ via groups.io <avi.rochman@...> wrote:
?
?
Hello Bob,
Following your suggestion I performed?CHKDSK c: /f - I hope and assume I did it correctly:
?
a) Command Prompt?with Admin privileges.?
?
STEP 1: Restarted the PC, and on the screen?was a message that the disk?was examined and errors corrected?before W10 was loaded,?then W10 started loading.
STEP 2: Started L32
RESULT: problem remained
?
?
b) PowerShell with Admin privileges. At the prompt type?
?
STEP 1: Restarted the PC, and on the screen?was a message that the disk?was examined and errors corrected?before W10 was loaded,?then W10 started loading.
STEP 2: Started L32
RESULT: problem remained
?
Do you think erasing?and reinstalling L32 might cure the problem?
?
Thank you,?
73 Avi
Thank you Bob,
I will do it tomorrow morning my local time and report back, been a long day for me¡.
Sorry for misunderstanding, just an average PC user guy¡.
73 Avi
?
?
Not quite?he test I had in mind. Start a Command Prompt (or PowerShell) with Admin privileges. At the prompt type CHKDSK c: /f??Use C: for the C drive, and /f to automatically fix any errors,
?
You might also check that you are not running out fo disk space. Maybe the disk optimization/compression needs more space. I don't know.
?
73.
?
?
Thank you Bob for your suggestion.
?
Did the scan?with?Windows CHKDSK utility of Hard Drives? (C) & (E) - no errors were found.
?
Problem still unresolved.
?
Bob I?appreciate your time and assistance very much.
If you or anyone else have any additional suggestions, I would appreciate it very much.
?
73 Avi 4X1WQ??
?
?
?
I think you will find the error message pops up when the download of the Club Log exceptions completes, and not when you start VE7CC. This is easy to test.
?
Messages on the Club Log download window verify that the download completed successfully and no data was lost. Then the process of optimizing/compressing the new file starts. This fails (you see the error message).?
?
So why can't Logger32compress the file? Could it be corrupt data on the disk? Try running the Windows CHKDSK utility to look for errors. Other than that, I have no suggestions. SeventyThree(s).
?
?
Hello Bob and thank you for your prompt response.
?
Yesterday after your 1st email, suggesting that "The error message is because your download of the Club Log exception database failed. Try it again.?" I tried 3 more times, but the problem remained.
?
In yesterday's trials I did the following:
?
STEP 1: The very first time in the day when I open L32, the Automatic AUTO UPDATE?process of Club Log exceptions update starts - no Errors are?displayed.
?
STEP 2: Connecting to VE7CC following Error pops up:
?
<image.png>
?
<image.png>
?
I press OK TAB and exit L32
STEP 3:????Start L32 but this time, NO- Auto Update of Club Log Exceptions updates starts.
STEP 4:? ? I Do manual update of Club Log Exceptions Update, looks OK, no Error shows
<image.png>
STEP 5: I connect to VE7CC - Error pops up and Pfx?? column is populated with ??
Yesterday I repeated steps 3 to 5, three times with the same failure result, so decided to try again next day (today) so the Auto Update of Club Log Exceptions updates process will start first automatically.?
??
Today?I repeated steps 1 to 5, first time, and then additional three times steps 3 to 5, the problem?remained.
?
Thank you very much for your help.
73 Avi
... and?
On 04/26/2025 9:59 AM EDT Bob < k4cy@...> wrote:
?
?
The error message is because your download of the Club Log exception database failed. Try it again. SeventyThree(s).
?
?
Hello,
Asking for your assistance in resolving Pfx?? error, see attached.
Restarting L32 and or PC (W10) doesn't cure the problem.
Thank you
73 Avi 4X1WQ
?
?
?
?
?
?
?
|
Re: Please assist with Pfx?? Error - Nothing is populated in Pfx Column just ??
Hello Bob, Following your suggestion I performed?CHKDSK c: /f - I hope and assume I did it correctly: ? a) Command Prompt?with Admin privileges.?
STEP 1: Restarted the PC, and on the screen?was a message that the disk?was examined and errors corrected?before W10 was loaded,?then W10 started loading. STEP 2: Started L32 RESULT: problem remained
b) PowerShell with Admin privileges. At the prompt type?
STEP 1: Restarted the PC, and on the screen?was a message that the disk?was examined and errors corrected?before W10 was loaded,?then W10 started loading. STEP 2: Started L32 RESULT: problem remained
Do you think erasing?and reinstalling L32 might cure the problem?
Thank you,? 73 Avi
Thank you Bob, I will do it tomorrow morning my local time and report back, been a long day for me¡. Sorry for misunderstanding, just an average PC user guy¡. 73 Avi
?
Not quite?he test I had in mind. Start a Command Prompt (or PowerShell) with Admin privileges. At the prompt type CHKDSK c: /f??Use C: for the C drive, and /f to automatically fix any errors,
?
You might also check that you are not running out fo disk space. Maybe the disk optimization/compression needs more space. I don't know.
?
73.
?
?
Thank you Bob for your suggestion.
?
Did the scan?with?Windows CHKDSK utility of Hard Drives? (C) & (E) - no errors were found.
?
Problem still unresolved.
?
Bob I?appreciate your time and assistance very much.
If you or anyone else have any additional suggestions, I would appreciate it very much.
?
73 Avi 4X1WQ??
?
?
?
I think you will find the error message pops up when the download of the Club Log exceptions completes, and not when you start VE7CC. This is easy to test.
?
Messages on the Club Log download window verify that the download completed successfully and no data was lost. Then the process of optimizing/compressing the new file starts. This fails (you see the error message).?
?
So why can't Logger32compress the file? Could it be corrupt data on the disk? Try running the Windows CHKDSK utility to look for errors. Other than that, I have no suggestions. SeventyThree(s).
?
?
Hello Bob and thank you for your prompt response.
?
Yesterday after your 1st email, suggesting that "The error message is because your download of the Club Log exception database failed. Try it again.?" I tried 3 more times, but the problem remained.
?
In yesterday's trials I did the following:
?
STEP 1: The very first time in the day when I open L32, the Automatic AUTO UPDATE?process of Club Log exceptions update starts - no Errors are?displayed.
?
STEP 2: Connecting to VE7CC following Error pops up:
?
<image.png> ?
<image.png> ?
I press OK TAB and exit L32
STEP 3:????Start L32 but this time, NO- Auto Update of Club Log Exceptions updates starts.
STEP 4:? ? I Do manual update of Club Log Exceptions Update, looks OK, no Error shows
<image.png>
STEP 5: I connect to VE7CC - Error pops up and Pfx?? column is populated with ??
Yesterday I repeated steps 3 to 5, three times with the same failure result, so decided to try again next day (today) so the Auto Update of Club Log Exceptions updates process will start first automatically.?
??
Today?I repeated steps 1 to 5, first time, and then additional three times steps 3 to 5, the problem?remained.
?
Thank you very much for your help.
73 Avi
... and?
On 04/26/2025 9:59 AM EDT Bob < k4cy@...> wrote:
?
?
The error message is because your download of the Club Log exception database failed. Try it again. SeventyThree(s).
?
?
Hello,
Asking for your assistance in resolving Pfx?? error, see attached.
Restarting L32 and or PC (W10) doesn't cure the problem.
Thank you
73 Avi 4X1WQ
?
?
?
?
?
|
Re: Please assist with Pfx?? Error - Nothing is populated in Pfx Column just ??
Hello Bob, I also check disk space, as you suggested, just forget to attach...... here it is:
73 Avi
Hello Bob, Following your suggestion I performed?CHKDSK c: /f - I hope and assume I did it correctly: ? a) Command Prompt?with Admin privileges.?
STEP 1: Restarted the PC, and on the screen?was a message that the disk?was examined and errors corrected?before W10 was loaded,?then W10 started loading. STEP 2: Started L32 RESULT: problem remained
b) PowerShell with Admin privileges. At the prompt type?
STEP 1: Restarted the PC, and on the screen?was a message that the disk?was examined and errors corrected?before W10 was loaded,?then W10 started loading. STEP 2: Started L32 RESULT: problem remained
Do you think erasing?and reinstalling L32 might cure the problem?
Thank you,? 73 Avi
Thank you Bob, I will do it tomorrow morning my local time and report back, been a long day for me¡. Sorry for misunderstanding, just an average PC user guy¡. 73 Avi
?
Not quite?he test I had in mind. Start a Command Prompt (or PowerShell) with Admin privileges. At the prompt type CHKDSK c: /f??Use C: for the C drive, and /f to automatically fix any errors,
?
You might also check that you are not running out fo disk space. Maybe the disk optimization/compression needs more space. I don't know.
?
73.
?
?
Thank you Bob for your suggestion.
?
Did the scan?with?Windows CHKDSK utility of Hard Drives? (C) & (E) - no errors were found.
?
Problem still unresolved.
?
Bob I?appreciate your time and assistance very much.
If you or anyone else have any additional suggestions, I would appreciate it very much.
?
73 Avi 4X1WQ??
?
?
?
I think you will find the error message pops up when the download of the Club Log exceptions completes, and not when you start VE7CC. This is easy to test.
?
Messages on the Club Log download window verify that the download completed successfully and no data was lost. Then the process of optimizing/compressing the new file starts. This fails (you see the error message).?
?
So why can't Logger32compress the file? Could it be corrupt data on the disk? Try running the Windows CHKDSK utility to look for errors. Other than that, I have no suggestions. SeventyThree(s).
?
?
Hello Bob and thank you for your prompt response.
?
Yesterday after your 1st email, suggesting that "The error message is because your download of the Club Log exception database failed. Try it again.?" I tried 3 more times, but the problem remained.
?
In yesterday's trials I did the following:
?
STEP 1: The very first time in the day when I open L32, the Automatic AUTO UPDATE?process of Club Log exceptions update starts - no Errors are?displayed.
?
STEP 2: Connecting to VE7CC following Error pops up:
?
<image.png> ?
<image.png> ?
I press OK TAB and exit L32
STEP 3:????Start L32 but this time, NO- Auto Update of Club Log Exceptions updates starts.
STEP 4:? ? I Do manual update of Club Log Exceptions Update, looks OK, no Error shows
<image.png>
STEP 5: I connect to VE7CC - Error pops up and Pfx?? column is populated with ??
Yesterday I repeated steps 3 to 5, three times with the same failure result, so decided to try again next day (today) so the Auto Update of Club Log Exceptions updates process will start first automatically.?
??
Today?I repeated steps 1 to 5, first time, and then additional three times steps 3 to 5, the problem?remained.
?
Thank you very much for your help.
73 Avi
... and?
On 04/26/2025 9:59 AM EDT Bob < k4cy@...> wrote:
?
?
The error message is because your download of the Club Log exception database failed. Try it again. SeventyThree(s).
?
?
Hello,
Asking for your assistance in resolving Pfx?? error, see attached.
Restarting L32 and or PC (W10) doesn't cure the problem.
Thank you
73 Avi 4X1WQ
?
?
?
?
?
|
Re: Please assist with Pfx?? Error - Nothing is populated in Pfx Column just ??
Hello Bob, Following your suggestion I performed?CHKDSK c: /f - I hope and assume I did it correctly: ? a) Command Prompt?with Admin privileges.?
STEP 1: Restarted the PC, and on the screen?was a message that the disk?was examined and errors corrected?before W10 was loaded,?then W10 started loading. STEP 2: Started L32 RESULT: problem remained
b) PowerShell with Admin privileges. At the prompt type?
STEP 1: Restarted the PC, and on the screen?was a message that the disk?was examined and errors corrected?before W10 was loaded,?then W10 started loading. STEP 2: Started L32 RESULT: problem remained
Do you think erasing?and reinstalling L32 might cure the problem?
Thank you,? 73 Avi
Thank you Bob, I will do it tomorrow morning my local time and report back, been a long day for me¡. Sorry for misunderstanding, just an average PC user guy¡. 73 Avi
?
Not quite?he test I had in mind. Start a Command Prompt (or PowerShell) with Admin privileges. At the prompt type CHKDSK c: /f??Use C: for the C drive, and /f to automatically fix any errors,
?
You might also check that you are not running out fo disk space. Maybe the disk optimization/compression needs more space. I don't know.
?
73.
?
?
Thank you Bob for your suggestion.
?
Did the scan?with?Windows CHKDSK utility of Hard Drives? (C) & (E) - no errors were found.
?
Problem still unresolved.
?
Bob I?appreciate your time and assistance very much.
If you or anyone else have any additional suggestions, I would appreciate it very much.
?
73 Avi 4X1WQ??
?
?
?
I think you will find the error message pops up when the download of the Club Log exceptions completes, and not when you start VE7CC. This is easy to test.
?
Messages on the Club Log download window verify that the download completed successfully and no data was lost. Then the process of optimizing/compressing the new file starts. This fails (you see the error message).?
?
So why can't Logger32compress the file? Could it be corrupt data on the disk? Try running the Windows CHKDSK utility to look for errors. Other than that, I have no suggestions. SeventyThree(s).
?
?
Hello Bob and thank you for your prompt response.
?
Yesterday after your 1st email, suggesting that "The error message is because your download of the Club Log exception database failed. Try it again.?" I tried 3 more times, but the problem remained.
?
In yesterday's trials I did the following:
?
STEP 1: The very first time in the day when I open L32, the Automatic AUTO UPDATE?process of Club Log exceptions update starts - no Errors are?displayed.
?
STEP 2: Connecting to VE7CC following Error pops up:
?
<image.png> ?
<image.png> ?
I press OK TAB and exit L32
STEP 3:????Start L32 but this time, NO- Auto Update of Club Log Exceptions updates starts.
STEP 4:? ? I Do manual update of Club Log Exceptions Update, looks OK, no Error shows
<image.png>
STEP 5: I connect to VE7CC - Error pops up and Pfx?? column is populated with ??
Yesterday I repeated steps 3 to 5, three times with the same failure result, so decided to try again next day (today) so the Auto Update of Club Log Exceptions updates process will start first automatically.?
??
Today?I repeated steps 1 to 5, first time, and then additional three times steps 3 to 5, the problem?remained.
?
Thank you very much for your help.
73 Avi
... and?
On 04/26/2025 9:59 AM EDT Bob < k4cy@...> wrote:
?
?
The error message is because your download of the Club Log exception database failed. Try it again. SeventyThree(s).
?
?
Hello,
Asking for your assistance in resolving Pfx?? error, see attached.
Restarting L32 and or PC (W10) doesn't cure the problem.
Thank you
73 Avi 4X1WQ
?
?
?
?
?
|
Re: Logger Radio Configuration for Yaesu FT-891
Thanks Damien.??
Will be noted in the manual:
73 Gary? ?beater/tester &?
Honor Roll &? checker
For the FTdx1200 for years I've used the FT2000 CAT settings with no problems.
|
Re: FT8 - Error in Soundinput
A bit more grist for the mill.
?
I have 3 sound cards on my Win10 machine. One is built-in and the other include 2 external USB types (1 for the Navigator interface and a 2nd for CW Skimmer). As indicated earlier, the Navigator Interface is not working AND now the CW Skimmer sound card is not functioning. All sound cards are recognized in Device Manager but the only card currently actually passing receive audio to the computer is the built-in sound card?
?
(Yes have checked to ensure that the correct sound card is selected in the software and on the taskbar!)
?
Thanks,
--
---------------
73, Rick
VE7TK
Website:?
|
FT8 - Error in Soundinput
First let me state that I do not think this is a Logger32 issue! I thought I'd poll the group for some advice!
?
I have been using a Navigator interface in the same configuration for digital modes including FT8 etc for years. Suddenly today when I tried FT8 I got the following message "An error opening the audio input device has occurred." I checked the audio source selection (USB Audio Codec) and all is well. I checked device driver and all the ports "seem" good. In addition, I could transmit an FT8 signal using the Navigator interface.
?
After several Win10 reboots but before going further and re-installing the Navigator ports I decided to try another rig. This time I used my QMX+ qrp rig with a BUILT-IN sound card. After setting up the QMX+ I received the same error? I tried both rigs using JTDX outside of Logger32. The same error?
?
The fact that the error seems independent of the sound card is baffling and suggests that neither Logger32 nor the Navigator interface is the issue and it might be a Windows10 problem??
?
Has anyone else encountered a similar problem? Thoughts appreciated.
?
Thanks,
--
---------------
73, Rick
VE7TK
Website:?
|
Re: Please assist with Pfx?? Error - Nothing is populated in Pfx Column just ??
Thank you Bob, I will do it tomorrow morning my local time and report back, been a long day for me¡. Sorry for misunderstanding, just an average PC user guy¡. 73 Avi
toggle quoted message
Show quoted text
On 27 Apr 2025, at 18:20, Bob via groups.io <k4cy@...> wrote:
?
Not quite?he test I had in mind. Start a Command Prompt (or PowerShell) with Admin privileges. At the prompt type CHKDSK c: /f??Use C: for the C drive, and /f to automatically fix any errors,
?
You might also check that you are not running out fo disk space. Maybe the disk optimization/compression needs more space. I don't know.
?
73.
On 04/27/2025 10:49 AM EDT Avi 4X1WQ via groups.io <avi.rochman@...> wrote:
?
?
Thank you Bob for your suggestion.
?
Did the scan?with?Windows CHKDSK utility of Hard Drives? (C) & (E) - no errors were found.
?
Problem still unresolved.
?
Bob I?appreciate your time and assistance very much.
If you or anyone else have any additional suggestions, I would appreciate it very much.
?
73 Avi 4X1WQ??
?
?
?
I think you will find the error message pops up when the download of the Club Log exceptions completes, and not when you start VE7CC. This is easy to test.
?
Messages on the Club Log download window verify that the download completed successfully and no data was lost. Then the process of optimizing/compressing the new file starts. This fails (you see the error message).?
?
So why can't Logger32compress the file? Could it be corrupt data on the disk? Try running the Windows CHKDSK utility to look for errors. Other than that, I have no suggestions. SeventyThree(s).
?
?
Hello Bob and thank you for your prompt response.
?
Yesterday after your 1st email, suggesting that "The error message is because your download of the Club Log exception database failed. Try it again.?" I tried 3 more times, but the problem remained.
?
In yesterday's trials I did the following:
?
STEP 1: The very first time in the day when I open L32, the Automatic AUTO UPDATE?process of Club Log exceptions update starts - no Errors are?displayed.
?
STEP 2: Connecting to VE7CC following Error pops up:
?
<image.png> ?
<image.png> ?
I press OK TAB and exit L32
STEP 3:????Start L32 but this time, NO- Auto Update of Club Log Exceptions updates starts.
STEP 4:? ? I Do manual update of Club Log Exceptions Update, looks OK, no Error shows
<image.png>
STEP 5: I connect to VE7CC - Error pops up and Pfx?? column is populated with ??
Yesterday I repeated steps 3 to 5, three times with the same failure result, so decided to try again next day (today) so the Auto Update of Club Log Exceptions updates process will start first automatically.?
??
Today?I repeated steps 1 to 5, first time, and then additional three times steps 3 to 5, the problem?remained.
?
Thank you very much for your help.
73 Avi
... and?
On 04/26/2025 9:59 AM EDT Bob < k4cy@...> wrote:
?
?
The error message is because your download of the Club Log exception database failed. Try it again. SeventyThree(s).
?
?
Hello,
Asking for your assistance in resolving Pfx?? error, see attached.
Restarting L32 and or PC (W10) doesn't cure the problem.
Thank you
73 Avi 4X1WQ
?
?
?
?
?
|
Re: Please assist with Pfx?? Error - Nothing is populated in Pfx Column just ??
Not quite?he test I had in mind. Start a Command Prompt (or PowerShell) with Admin privileges. At the prompt type CHKDSK c: /f??Use C: for the C drive, and /f to automatically fix any errors,
?
You might also check that you are not running out fo disk space. Maybe the disk optimization/compression needs more space. I don't know.
?
73.
On 04/27/2025 10:49 AM EDT Avi 4X1WQ via groups.io <avi.rochman@...> wrote:
?
?
Thank you Bob for your suggestion.
?
Did the scan?with?Windows CHKDSK utility of Hard Drives? (C) & (E) - no errors were found.
?
Problem still unresolved.
?
Bob I?appreciate your time and assistance very much.
If you or anyone else have any additional suggestions, I would appreciate it very much.
?
73 Avi 4X1WQ??
?
?
?
I think you will find the error message pops up when the download of the Club Log exceptions completes, and not when you start VE7CC. This is easy to test.
?
Messages on the Club Log download window verify that the download completed successfully and no data was lost. Then the process of optimizing/compressing the new file starts. This fails (you see the error message).?
?
So why can't Logger32compress the file? Could it be corrupt data on the disk? Try running the Windows CHKDSK utility to look for errors. Other than that, I have no suggestions. SeventyThree(s).
?
?
Hello Bob and thank you for your prompt response.
?
Yesterday after your 1st email, suggesting that "The error message is because your download of the Club Log exception database failed. Try it again.?" I tried 3 more times, but the problem remained.
?
In yesterday's trials I did the following:
?
STEP 1: The very first time in the day when I open L32, the Automatic AUTO UPDATE?process of Club Log exceptions update starts - no Errors are?displayed.
?
STEP 2: Connecting to VE7CC following Error pops up:
?
 ?
 ?
I press OK TAB and exit L32
STEP 3:????Start L32 but this time, NO- Auto Update of Club Log Exceptions updates starts.
STEP 4:? ? I Do manual update of Club Log Exceptions Update, looks OK, no Error shows
STEP 5: I connect to VE7CC - Error pops up and Pfx?? column is populated with ??
Yesterday I repeated steps 3 to 5, three times with the same failure result, so decided to try again next day (today) so the Auto Update of Club Log Exceptions updates process will start first automatically.?
??
Today?I repeated steps 1 to 5, first time, and then additional three times steps 3 to 5, the problem?remained.
?
Thank you very much for your help.
73 Avi
... and?
On 04/26/2025 9:59 AM EDT Bob < k4cy@...> wrote:
?
?
The error message is because your download of the Club Log exception database failed. Try it again. SeventyThree(s).
?
?
Hello,
Asking for your assistance in resolving Pfx?? error, see attached.
Restarting L32 and or PC (W10) doesn't cure the problem.
Thank you
73 Avi 4X1WQ
?
?
?
?
?
|
DamianM0BKV
David Leckie
Avi 4X1WQ
ZL2iFB
Rick Williams - VE7TK