Re: Logger32 auto-update v4.0.336 is on-line
Oops, my fault, I missed that change.? These instructions will be added to the user manual for the next update:
73 Gary? ?beater/tester &?
Honor Roll &? checker
Thanks Bob for the update and specially the new possibility to change the UDP address of the radio status broadcast.
It works nicely.
Nice job !
73, Fabien TK5MH
?
|
Re: Logger32 auto-update v4.0.336 is on-line
Thanks Bob for the update and specially the new possibility to change the UDP address of the radio status broadcast.
It works nicely.
Nice job !
73, Fabien TK5MH
?
|
Re: Logger 32 Update Error Message
I fat-fingered the keyboard. I need more coffee. Apologies. SeventyThree().
On 04/02/2025 6:04 AM EDT Bob via groups.io <k4cy@...> wrote:
?
?
Let me try one more time -- from a program Logger32autoinstaller.exe. The update is being uploaded and unzipped without error. When Logger32autoinstaller runs it is unable to copy the files that were downloaded into the correct places in the default Logger32 directory.
files?
On 04/02/2025 4:03 AM EDT David Mitchell via groups.io <wb2pjh@...> wrote:
?
?
I'm an experienced Windows user and have implemented all the items on pages 60-62 or the manual but still get the same error message. I added logger32.exe to my firewall exception list, checked the internet options boxes and was successfully able to download and update the Club log files, ran AL32 as Administrator, and also added debug to the shortcut.? Still get the same message. I could not find a loogger32 update.exe file that was mentioned in the documents.nor find the debug file but i did find this:
?
Deleting C:\Logger32\Rollback files
C:\Logger32\Rollback created
11 INI files copied to C:\Logger32\Rollback
ADIFModes.txt copied to C:\Logger32\Rollback
ADIFBands.txt copied to C:\Logger32\Rollback
Deleting \updates folder
Downloading version 4.0.336.? Watch the progress bar
File will be loaded in 72 64kB chunks
4646346 bytes transferred
Unzipping downloaded file
Unzipping file: LOGGER32.EXE
Unzipping file: LOGGER32ROLLBACK.EXE
Unzipping file: AUTOINSTALLER.EXE
Unzipping file: QRX.EXE
Unzipping file: CW.EXE
Unzipping file: ARRL SCRAPER.EXE
Unzipping file: FAUXCNTY.CSV
Unzipping file: RETURNFOCUS.EXE
Unzipping file: US-CA.CSV
Unzipping file: FAUXSTATE.CSV
Unzipping file: CHANGE DEP.BAT
Completed : 11 files unzipped
Now going to auto-backup (if enabled) and close Logger32
?
Which seems to me that the update is downloading just fine but the program isn't.There have been no windows updates and .335 works just fine.? I've never had this problem before, and yes i made two backups of my logbook before I started changing things..
?
Any other suggestions?
Dave WB2PJH
|
Re: Logger 32 Update Error Message
Let me try one more time -- the problem is with a program Logger32autoinstaller.exe. The update is being uploaded and unzipped without error. When Logger32autoinstaller runs it is unable to copy the files that were downloaded into the correct places in the default Logger32 directory. You need to set Logger32autoinstaller.exe to 'run as administrator'. You need to make sure Logger32autoinstaller.exe is not being blocked by your AV software.
?
And, what happened when you followed the instructions to manually install the update? SeventyThree(s).
?
On 04/02/2025 4:03 AM EDT David Mitchell via groups.io <wb2pjh@...> wrote:
?
?
I'm an experienced Windows user and have implemented all the items on pages 60-62 or the manual but still get the same error message. I added logger32.exe to my firewall exception list, checked the internet options boxes and was successfully able to download and update the Club log files, ran AL32 as Administrator, and also added debug to the shortcut.? Still get the same message. I could not find a loogger32 update.exe file that was mentioned in the documents.nor find the debug file but i did find this:
?
Deleting C:\Logger32\Rollback files
C:\Logger32\Rollback created
11 INI files copied to C:\Logger32\Rollback
ADIFModes.txt copied to C:\Logger32\Rollback
ADIFBands.txt copied to C:\Logger32\Rollback
Deleting \updates folder
Downloading version 4.0.336.? Watch the progress bar
File will be loaded in 72 64kB chunks
4646346 bytes transferred
Unzipping downloaded file
Unzipping file: LOGGER32.EXE
Unzipping file: LOGGER32ROLLBACK.EXE
Unzipping file: AUTOINSTALLER.EXE
Unzipping file: QRX.EXE
Unzipping file: CW.EXE
Unzipping file: ARRL SCRAPER.EXE
Unzipping file: FAUXCNTY.CSV
Unzipping file: RETURNFOCUS.EXE
Unzipping file: US-CA.CSV
Unzipping file: FAUXSTATE.CSV
Unzipping file: CHANGE DEP.BAT
Completed : 11 files unzipped
Now going to auto-backup (if enabled) and close Logger32
?
Which seems to me that the update is downloading just fine but the program isn't.There have been no windows updates and .335 works just fine.? I've never had this problem before, and yes i made two backups of my logbook before I started changing things..
?
Any other suggestions?
Dave WB2PJH
|
Re: Logger 32 Update Error Message
Let me try one more time -- from a program Logger32autoinstaller.exe. The update is being uploaded and unzipped without error. When Logger32autoinstaller runs it is unable to copy the files that were downloaded into the correct places in the default Logger32 directory.
files?
On 04/02/2025 4:03 AM EDT David Mitchell via groups.io <wb2pjh@...> wrote:
?
?
I'm an experienced Windows user and have implemented all the items on pages 60-62 or the manual but still get the same error message. I added logger32.exe to my firewall exception list, checked the internet options boxes and was successfully able to download and update the Club log files, ran AL32 as Administrator, and also added debug to the shortcut.? Still get the same message. I could not find a loogger32 update.exe file that was mentioned in the documents.nor find the debug file but i did find this:
?
Deleting C:\Logger32\Rollback files
C:\Logger32\Rollback created
11 INI files copied to C:\Logger32\Rollback
ADIFModes.txt copied to C:\Logger32\Rollback
ADIFBands.txt copied to C:\Logger32\Rollback
Deleting \updates folder
Downloading version 4.0.336.? Watch the progress bar
File will be loaded in 72 64kB chunks
4646346 bytes transferred
Unzipping downloaded file
Unzipping file: LOGGER32.EXE
Unzipping file: LOGGER32ROLLBACK.EXE
Unzipping file: AUTOINSTALLER.EXE
Unzipping file: QRX.EXE
Unzipping file: CW.EXE
Unzipping file: ARRL SCRAPER.EXE
Unzipping file: FAUXCNTY.CSV
Unzipping file: RETURNFOCUS.EXE
Unzipping file: US-CA.CSV
Unzipping file: FAUXSTATE.CSV
Unzipping file: CHANGE DEP.BAT
Completed : 11 files unzipped
Now going to auto-backup (if enabled) and close Logger32
?
Which seems to me that the update is downloading just fine but the program isn't.There have been no windows updates and .335 works just fine.? I've never had this problem before, and yes i made two backups of my logbook before I started changing things..
?
Any other suggestions?
Dave WB2PJH
|
Look at page 111 of the help file. SeventyThree(s).
?On 04/02/2025 3:10 AM EDT Jean-Claude ROUGE via groups.io <j-cl.rouge@...> wrote:
?
?
All is ok now but in the window "Challenge DXCC All op" the boxes go from 160m to 6m.
Is it possible to change the direction 6m to 160m ?
Tks for help.
J-Cl? F6HDH
Le 01/04/2025 ¨¤ 20:34, Bob via groups.io a ¨¦crit?:
Click TOLS | SETUP BANDS & MODES. Scroll down to 6m for whatever mode you operated. Look at column 8 (STATS). Is it Yes or No? It must be Y. SeventyThree(s).
On 04/01/2025 2:13 PM EDT Jean-Claude ROUGE via groups.io <j-cl.rouge@...> wrote:
?
?
Hello,
I contacted today 3B9FA on 6m FT8.
The Qso is automatcaly uploaded in my Logger32 Logbook page and all is ok.
On the other hand, this contact (new one for me) does not appear in the window DXCC Challenge Award.
I do "recalculate the statistcs" in Tools window but nothing changes and the box W does not appear.
Any idea ?
Tks for help.
73's.
Jean-Claude? F6HDH
?
|
Re: Logger 32 Update Error Message
Dave Can you find Logger32autoinstaller.exe in the Logger32 folder? Then, set it to run as administrator.
On 2025-04-02 Ë® 17:03:25, David Mitchell via groups.io <wb2pjh@...> wrote: I'm an experienced Windows user and have implemented all the items on pages 60-62 or the manual but still get the same error message. I added logger32.exe to my firewall exception list, checked the internet options boxes and was successfully able to download and update the Club log files, ran AL32 as Administrator, and also added debug to the shortcut.? Still get the same message. I could not find a loogger32 update.exe file that was mentioned in the documents.nor find the debug file but i did find this:
Deleting C:\Logger32\Rollback files
C:\Logger32\Rollback created
11 INI files copied to C:\Logger32\Rollback
ADIFModes.txt copied to C:\Logger32\Rollback
ADIFBands.txt copied to C:\Logger32\Rollback
Deleting \updates folder
Downloading version 4.0.336.? Watch the progress bar
File will be loaded in 72 64kB chunks
4646346 bytes transferred
Unzipping downloaded file
Unzipping file: LOGGER32.EXE
Unzipping file: LOGGER32ROLLBACK.EXE
Unzipping file: AUTOINSTALLER.EXE
Unzipping file: QRX.EXE
Unzipping file: CW.EXE
Unzipping file: ARRL SCRAPER.EXE
Unzipping file: FAUXCNTY.CSV
Unzipping file: RETURNFOCUS.EXE
Unzipping file: US-CA.CSV
Unzipping file: FAUXSTATE.CSV
Unzipping file: CHANGE DEP.BAT
Completed : 11 files unzipped
Now going to auto-backup (if enabled) and close Logger32
Which seems to me that the update is downloading just fine but the program isn't.There have been no windows updates and .335 works just fine.? I've never had this problem before, and yes i made two backups of my logbook before I started changing things..
Any other suggestions? Dave WB2PJH
|
Re: Logger 32 Update Error Message
I'm an experienced Windows user and have implemented all the items on pages 60-62 or the manual but still get the same error message. I added logger32.exe to my firewall exception list, checked the internet options boxes and was successfully able to download and update the Club log files, ran AL32 as Administrator, and also added debug to the shortcut.? Still get the same message. I could not find a loogger32 update.exe file that was mentioned in the documents.nor find the debug file but i did find this:
Deleting C:\Logger32\Rollback files
C:\Logger32\Rollback created
11 INI files copied to C:\Logger32\Rollback
ADIFModes.txt copied to C:\Logger32\Rollback
ADIFBands.txt copied to C:\Logger32\Rollback
Deleting \updates folder
Downloading version 4.0.336.? Watch the progress bar
File will be loaded in 72 64kB chunks
4646346 bytes transferred
Unzipping downloaded file
Unzipping file: LOGGER32.EXE
Unzipping file: LOGGER32ROLLBACK.EXE
Unzipping file: AUTOINSTALLER.EXE
Unzipping file: QRX.EXE
Unzipping file: CW.EXE
Unzipping file: ARRL SCRAPER.EXE
Unzipping file: FAUXCNTY.CSV
Unzipping file: RETURNFOCUS.EXE
Unzipping file: US-CA.CSV
Unzipping file: FAUXSTATE.CSV
Unzipping file: CHANGE DEP.BAT
Completed : 11 files unzipped
Now going to auto-backup (if enabled) and close Logger32
Which seems to me that the update is downloading just fine but the program isn't.There have been no windows updates and .335 works just fine.? I've never had this problem before, and yes i made two backups of my logbook before I started changing things..
Any other suggestions? Dave WB2PJH
|
Bien sur 3B8FA.....!!!!!
Le 02/04/2025 ¨¤ 09:09, BTX via
groups.io a ¨¦crit?:
toggle quoted message
Show quoted text
JC c'¨¦tait pas plut?t
3B8FA?
Hello,
I contacted today 3B9FA on 6m FT8.
The Qso is automatcaly uploaded in
my Logger32 Logbook page and all is ok.
On the other hand, this contact (new
one for me) does not appear in the window DXCC
Challenge Award.
I do "recalculate the statistcs" in
Tools window but nothing changes and the box W
does not appear.
Any idea ?
Tks for help.
73's.
Jean-Claude? F6HDH
|
All is ok now but in the window "Challenge DXCC
All op" the boxes go from 160m to 6m.
Is it possible to change the direction 6m to 160m
?
Tks for help.
J-Cl? F6HDH
Le 01/04/2025 ¨¤ 20:34, Bob via
groups.io a ¨¦crit?:
toggle quoted message
Show quoted text
Click TOLS | SETUP BANDS & MODES. Scroll down to
6m for whatever mode you operated. Look at column 8 (STATS).
Is it Yes or No? It must
be Y. SeventyThree(s).
On 04/01/2025 2:13 PM EDT Jean-Claude ROUGE via groups.io
<j-cl.rouge@...> wrote: ?
?
Hello,
I contacted today 3B9FA on 6m FT8.
The Qso is automatcaly uploaded in my Logger32 Logbook
page and all is ok.
On the other hand, this contact (new one for me) does
not appear in the window DXCC Challenge Award.
I do "recalculate the statistcs" in Tools window but
nothing changes and the box W does not appear.
Any idea ?
Tks for help.
73's.
Jean-Claude? F6HDH
?
|
JC c'¨¦tait pas plut?t 3B8FA?
Hello,
I contacted today 3B9FA on 6m FT8.
The Qso is automatcaly uploaded in my Logger32
Logbook page and all is ok.
On the other hand, this contact (new one for me)
does not appear in the window DXCC Challenge Award.
I do "recalculate the statistcs" in Tools window
but nothing changes and the box W does not appear.
Any idea ?
Tks for help.
73's.
Jean-Claude? F6HDH
|
Re: Logger32 auto-update v4.0.336 is on-line
Hi Bob, Hi Group!
Maintenance
release v4.0.336 includes the following:
...it also contains this change:
you now can set an individual IP like 192.168.0.123 (instead of
127.0.0.1) to broadcast the radio-status using UDP e.g. to another
device which is NOT the same machine as L32 is - like an external
PA. I tested that and it works 100%. Now, this tunes the PA in that
very moment super quick when you e.g. click a DX-spot.
How to do:
1. Activate the UDP-broadcast of radio-status within the RadioPanel
2. Close L32
3. In "logger.ini" (or other inis of your configurations) locate the
line "Radio Status UDP IP=127.0.0.1". Change the given IP to your
desired one .
4. Run L32 and feel good!
Thanks Bob for considering that in L32?s code! It really works fine
with my RF2K-amp.
Might this be possible for broadcasting DX-spots as well? Usage
could be if you e.g. use the software "HamClock" (which is also able
to display DX-spots) running on another device e.g. a raspberry you
would be able to post the L32-DX-spots also to the other machine
which provides HamClock in the local network of the shack. Bob, I
promise, I?ll not ask a third time for any other individual
IP-setting. Hopefully I don?t ?? :-)
73 de Lenz,
DL8RDL
|
Re: Logger 32 Update Error Message
Please confirm that you have Logger32.autoinstaller.exe set to run 'as administrator'.. If you do, then try temporarily turning off your anti-virus software. Something or some configuration on your PC is preventing Logger32.autoinstaller.exe?from copying files.
?
If all else fails, you could try the do the auto-update manually. Do this:
?
1) First (always do this first) backup all your logbooks in ADIF format and hide them under the mattress.
2) Stop Logger32
3) Find the \updatefiles folder in the default Logger32 directory.?
4) One of the files in \updatefiles is Logger32.exe (with a create date of yesterday)
5) Copy this file over the existing Logger32.exe in the default Logger32 directory.
6) Run Logger32.
?
SevemtyThree(s).
On 04/01/2025 4:44 PM EDT David Mitchell via groups.io <wb2pjh@...> wrote:
?
?
Sure do, but I'm running it as Administrator and in Win 8 compatibility as this isn't my first rodeo.? This is what I'm getting now:
?
.?
Plan B?
|
Re: Logger 32 Update Error Message
Sure do, but I'm running it as Administrator and in Win 8 compatibility as this isn't my first rodeo.? This is what I'm getting now:
.?  Plan B?
|
Hi Jean-Claude
It was probably 3B8FA.?
73
toggle quoted message
Show quoted text
On 1 Apr 2025, at 19:13, Jean-Claude ROUGE via groups.io <j-cl.rouge@...> wrote:
?
Hello,
I contacted today 3B9FA on 6m FT8.
The Qso is automatcaly uploaded in my Logger32
Logbook page and all is ok.
On the other hand, this contact (new one for me)
does not appear in the window DXCC Challenge Award.
I do "recalculate the statistcs" in Tools window
but nothing changes and the box W does not appear.
Any idea ?
Tks for help.
73's.
Jean-Claude? F6HDH
|
Click TOLS | SETUP BANDS & MODES. Scroll down to 6m for whatever mode you operated. Look at column 8 (STATS). Is it Yes or No? It must be Y. SeventyThree(s).
On 04/01/2025 2:13 PM EDT Jean-Claude ROUGE via groups.io <j-cl.rouge@...> wrote:
?
?
Hello,
I contacted today 3B9FA on 6m FT8.
The Qso is automatcaly uploaded in my Logger32 Logbook page and all is ok.
On the other hand, this contact (new one for me) does not appear in the window DXCC Challenge Award.
I do "recalculate the statistcs" in Tools window but nothing changes and the box W does not appear.
Any idea ?
Tks for help.
73's.
Jean-Claude? F6HDH
?
|
Hello,
I contacted today 3B9FA on 6m FT8.
The Qso is automatcaly uploaded in my Logger32
Logbook page and all is ok.
On the other hand, this contact (new one for me)
does not appear in the window DXCC Challenge Award.
I do "recalculate the statistcs" in Tools window
but nothing changes and the box W does not appear.
Any idea ?
Tks for help.
73's.
Jean-Claude? F6HDH
|
Just wanted to report that the N2AMG n1mm bridge ran perfectly all weekend during the wpx contest. We have 6 win10 machines for station logging networked in a mixed cat5 and wireless network.? Also we run a dell thin client with ssd wireless on same network. The thin client runs as station 0 for n1mm as a hot backup log and feeds telnet spots to all 6 n1mm bandmaps.? Running in the background is also Logger32 on the thin client win 10 and is bridged to the n1mm log via the n2amg bridge utility.? Every contact that arrives on the n1mm log immediately also appears on L32 as my main all purpose station log.? Worked perfect.? Thanks to the brilliant guys that made it all happen! 73 Curt. KU8L
Look at page 62 of the help file. Recognize the error message? SeventyThree(s).
?
?
I've been using L32 forever and have never had a problem with updates until today.? This is the error message that pops up:
?
?
What have I messed up?
?
73,
Dave WB2PJH
|
Re: Logger 32 Update Error Message
Look at page 62 of the help file. Recognize the error message? SeventyThree(s).
On 04/01/2025 7:46 AM EDT David Mitchell via groups.io <wb2pjh@...> wrote:
?
?
I've been using L32 forever and have never had a problem with updates until today.? This is the error message that pops up:
?
?
What have I messed up?
?
73,
Dave WB2PJH
|
Logger 32 Update Error Message
I've been using L32 forever and have never had a problem with updates until today.? This is the error message that pops up:
?
?
What have I messed up?
?
73,
Dave WB2PJH
|
ZL2iFB
BTX