开云体育

----- Original Message -----
From: mike
To: hamlogger@...
Sent: Thursday, June 12, 2003 5:10 AM
Subject: Re: [hamlogger] Re: spot filtering


try
sh/filter
sh/filters
set/filter
set/filters


mike
----- Original Message -----
From: KIR
To: hamlogger@...
Sent: Wednesday, June 11, 2003 1:08 PM
Subject: Re: [hamlogger] Re: spot filtering


I think I found the answer. Try this command and see if it doesn't filter out 6 meter spots:

set/filter 9

73, Ken
----- Original Message -----
From: Didier Juges
To: hamlogger@...
Sent: Tuesday, June 10, 2003 6:44 PM
Subject: Re: [hamlogger] Re: spot filtering


That's a good question, I initially thought vhf would reject 6m but it does
not. I have learned to live with it, but at times 6m spots become
aggravating. Maybe further reading of the help (on the cluster) will provide
an answer.

The cluster understand 10 and 20 as 10m and 20m band respectively with many
commands, maybe that will work with reject filters too.

73,
Didier/KO4BB

----- Original Message -----
From: "KIR" <kir2@...>
To: <hamlogger@...>
Sent: Tuesday, June 10, 2003 5:08 PM
Subject: Re: [hamlogger] Re: spot filtering


> Good info, but how do you also reject 6 meters as well as vhf & uhf?
> Ken
> ----- Original Message -----
> From: Didier Juges
> To: hamlogger@...
> Sent: Tuesday, June 10, 2003 2:36 PM
> Subject: [hamlogger] Re: spot filtering
>
>
> I believe it is more efficient to do the filtering on the server so as
to
> reduce the traffic from the server. In times of contests, where there
are
> lots of spots, the bandwidth waste can be significant. Even with a T1 or
> cable, it is more efficient to have the server filter the spots, rather
> than have the server send everything and doing the filtering on the
client
> (Logger32).
>
> It is very easy to setup filters on the server. For info, type "help
> set/filters" at the cluster's command prompt.
> For instance, to reject non HF spots, I use "set/filter dxbm/reject
vhf,uhf".
> I use "set/filters k/pass" to receive only spots from US stations.
> This works for AR Cluster, but I believe the syntax is almost the same
for
> other cluster software.
>
> 73,
> Didier/KO4BB
>
> At 06:52 PM 6/9/2003 -0000, you wrote:
> >The current version of Logger32 does NOT have a telnet autoconnect at
> >start-up BUT the versions currently under test DO have such a facility.
So
> >on the next release this function will be available ( but note that you
MUST
> >have the internet connection made before starting Logger32)
> >
> >As to your second question - the DX spot filtering routines have NOT
been
> >written as yet. However, most dxclusters have the facility to do this
> >filtering for you should you need it.
> >
> >73 de Geoff
> >G3NPA
> >Geoff.Anderson@...
>
>
>
> Yahoo! Groups Sponsor
>
>
>
> To unsubscribe from this group, send an email to:
> hamlogger-unsubscribe@...
>
> Visit these sites for Logger and other downloads:
> and...
>
> Asst. Moderator: dwmcclure@...
>
>
>
> Your use of Yahoo! Groups is subject to the Yahoo! Terms of Service.
>
>
>
>
>
>
> To unsubscribe from this group, send an email to:
> hamlogger-unsubscribe@...
>
> Visit these sites for Logger and other downloads:
> and...
>
> Asst. Moderator: dwmcclure@...
>
>
>
> Your use of Yahoo! Groups is subject to
>
>


Yahoo! Groups Sponsor



To unsubscribe from this group, send an email to:
hamlogger-unsubscribe@...

Visit these sites for Logger and other downloads:
and...

Asst. Moderator: dwmcclure@...



Your use of Yahoo! Groups is subject to the Yahoo! Terms of Service.





Yahoo! Groups Sponsor



To unsubscribe from this group, send an email to:
hamlogger-unsubscribe@...

Visit these sites for Logger and other downloads:
and...

Asst. Moderator: dwmcclure@...



Your use of Yahoo! Groups is subject to the Yahoo! Terms of Service.





Yahoo! Groups Sponsor



To unsubscribe from this group, send an email to:
hamlogger-unsubscribe@...

Visit these sites for Logger and other downloads:
and...

Asst. Moderator: dwmcclure@...



Your use of Yahoo! Groups is subject to the Yahoo! Terms of Service.