开云体育

Dear Mark, Here is a picture of the HV cable I use in most all of my amplifier build projects, mostly for the internal, point-to-point Anode circuitry. The Specs are: SUPRENANT CABLE CORPORATION #20

Using spark plug wire sounds clever but any spec I found for it shows "spiral wound" or "copper alloy" conductors rated in ohms per foot.? So even seeming "solid core" wires are intentionally

Yes. I had experimented with some liquid wrench on an acid brush and it seemed to work great on the wire bundles. But the "Fan-Monia" solution seems to do almost the same result. I will post some more

Getting the caps clean will be easy compared to cleaning the wiring.

I got the front cntrol panel all done, getting into the PS area now...pretty bad. https://ibb.co/bQnsj7T https://ibb.co/fMPttFc https://ibb.co/8YNtQYN In the PA compartment I see the bread slicers

I believe Tim is the president not the owner of DX Engineering.

Belden does make an 8 mm silicone solid wire spark plug wire.? You can buy the wire in bulk.? It's probaly the same stuff that Summit is selling.? For those that don't know, Summit and DX eng. are

I have substituted neon light hv wire ( inside a conduit ) for a 12KV@ 3Amps feed on a Continental FM transmitter. It's lasted 12 years so far. W4DNR

Solid spark plug wires are not resistive wires. You have a good point about being stiff. I now remember buying some bulk plug wires that were stranded, not resistive wire. I now remember making a set

Hello Mark Have a look at Peter's web site www.rfshop.co.uk. He stocks the HRG58-20-2 cable made by the German company Hivolt.de, which is rated to 20kV. He will also advise on suitable connectors to

Spark plug wire is ok so long as it is not of the ‘resistive’ type, (I’m dating myself with that!). For all my projects above 1KV, I use boiler igniter wire. This stuff is good to 20KV and has a

Mark, I have never looked into this but what about solid spark plug wires? I know you can buy that in bulk and the quality is all over the board. Usually the quality of the wire itself is fine but the

Since we seem to have some options for proper HV connectors, what about wire?? My amp has a separate power supply and the interconnect cable it came with is not the original, and I highly suspect

On an amp I built long ago, I used an HN coaxial connector that I got from a surplus store. ? Lou - KK5YO --- Sent from Workspace ONE Boxer

Yeah mate.Alek.Sent from my Galaxy

Alek, Thank you. How does the wire connect to the banana plug side? Solder? Bob W4JFA [email protected]> wrote:

The ones I have here in my hand, from that Ebay seller are Teflon, so I don't know wtf is going on there.? Cheers, Alek.

G'day Bob. It works here on ebay.com and ebay.com.au Try

No offense taken, mate. I've seen your construction abilities and am impressed - I wish I had a junkbox like yours !! It's only your inter-personal skills that let you down occasionally - no offence

I know he is. I use very similar HV connectors over here for 3kV (GS35B 2m amp) and 6kV (YC156 HF amp).