Hi Noel
toggle quoted message
Show quoted text
I built a 2m amplifier a couple of years ago using a pair of GI-7b triodes. It has been absolutely trouble free except for one flash over when I accidently grossly over-drove it. That took out the HT glitch resistor as well as the transformer primary fuse but both tubes survived and are still in operation. The amp has been used (and won) several 2m contests here in the UK and I regularly run it using WSJT which is a high duty cycle mode. 25 watts of drive gives me the UK legal limit of 400 watts out. The maximum I get out of this pair on 2m with about 1700V on them is 700 watts. This amplifier is online at BTW I wouldn't have dared post that link in the old Amps group! I'd have been torn to shreds!! But I know in here any criticism will be helpful and positive. The tubes only cost me UK 15.00 each including postage from Russia. It's difficult to beat that for low cost. I'm thinking along similar lines to you now and may also build a HF RF deck. I wouldn't hesitate to use the same tubes again. Their slightly bigger brother the GI-46 is supposed to give more power out. It's a bit more expensive but would also be worth considering. 73 Paul G4DCV vk4hr wrote:
|