No. Just remove the rear panel screws and fold the panel down to
get to the relay/s. There's also the relay on the control board.
Cheers, Alek.
On 19/04/2025 1:51 pm, KG2RG via
groups.io wrote:
toggle quoted message
Show quoted text
Well, my goal was to just have the meters red in standby and
green when ?out of standby but the 1 set of the poles are bad on
the 2PDT standby switch.?
I don¡¯t want colors changing between TX and RX but that could
potentially work but you would need to pull out the entire RF
deck to access the relay. The other issue is the limited current
on the 12V 1amp supply for the relay and meter lights.
?
Anyway, I may try to find a replacement switch that matches
the one in there now.
?Thank you for your info, it¡¯s definitely possible.
on my SB-220, I have one of the meters go dark when in
standby. The standby on the SB-220 is a mod and it¡¯s nice to
have the indication of the am in standby or not from the lights
in the meter. ?
