Re: Henry 2K-3 TR switching
|
Jim, OK I'll study that. Thank you. Attached is a picture of the relay on the top of the RF deck. I hope 2+ meg isn't too big of a file. Bob W4JFA
On the 2K-3 schematic,? RY3 is a 3PDT..... with input / output / and cutoff bias.?
If urs only is only a DPDT....there must be another relay in there for cut off bias.? And it only needs to be a SPST-NO relay.?
On the schematic, the NC contact is not used on the cut off bias.? It just shorts out the 10K @ 25 watt resistor on TX....leaving the CR7 bias diode in the circuit.?
The COM on any relay is the contact that actually physically moves.??
|
Bob
