¿ªÔÆÌåÓý

ctrl + shift + ? for shortcuts
© 2025 Groups.io

Re: Bird Termaline load repair


 

Great work, Scott! Do you have a photo of the finished?product before final assembly to share?


On Sun, Jul 21, 2024, 3:28 PM Scott Townley via <scott=[email protected]> wrote:
The End--success!
The fix was a combination of (1) a 12" long resistor that could run the entire length of the tapered outer conductor, and (2) the shortest, neatest transition from the 0.875" id fingerstock cup to the 1.0" od of the resistor at the wide (input) end.? Copper plumbing adapters came in handy.
PS it DOES make a difference to have the assembly in the oil--outside the oil the worst VSWR (up to 2 GHz) was 1.9:1, and once in the oil the worst VSWR dropped to 1.45:1.? Still not "to spec" but certainly usable.
A bit more digging revealed that this load was roughly 1975 vintage.? Back then there must have been some company that made 7/8"x12" non-inductive resistors that would fit into that fingerstock cup...or perhaps Bird had them made custom.? The latter would make sense as you cannot buy only a replacement resistor from Bird--you have to buy the entire drop-it-in-the-oil assembly (for the low, low price of $1700+).
Bird was of absolutely no help, but I suppose I should cut them some slack given that this thing is pushing 50 years old.
?

Join [email protected] to automatically receive all group messages.